@@ -18,3 +18,7 @@ power-domain@RK3568_PD_PIPE {
#power-domain-cells = <0>;
};
};
+
+&vop {
+ compatible = "rockchip,rk3566-vop";
+};
@@ -95,3 +95,7 @@ power-domain@RK3568_PD_PIPE {
#power-domain-cells = <0>;
};
};
+
+&vop {
+ compatible = "rockchip,rk3568-vop";
+};
@@ -10,6 +10,7 @@
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/power/rk3568-power.h>
#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
#include <dt-bindings/thermal/thermal.h>
/ {
@@ -125,6 +126,11 @@ opp-1800000000 {
};
};
+ display_subsystem: display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vop_out>;
+ };
+
firmware {
scmi: scmi {
compatible = "arm,scmi-smc";
@@ -447,6 +453,50 @@ gmac1_mtl_tx_setup: tx-queues-config {
};
};
+ vop: vop@fe040000 {
+ reg = <0x0 0xfe040000 0x0 0x5000>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>, <&cru DCLK_VOP0>, <&cru DCLK_VOP1>, <&cru DCLK_VOP2>;
+ clock-names = "aclk_vop", "hclk_vop", "dclk_vp0", "dclk_vp1", "dclk_vp2";
+ iommus = <&vop_mmu>;
+ power-domains = <&power RK3568_PD_VO>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ vop_out: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vp0: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ vp1: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ vp2: port@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
+ vop_mmu: iommu@fe043e00 {
+ compatible = "rockchip,rk3568-iommu";
+ reg = <0x0 0xfe043e00 0x0 0x100>, <0x0 0xfe043f00 0x0 0x100>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
qos_gpu: qos@fe128000 {
compatible = "rockchip,rk3568-qos", "syscon";
reg = <0x0 0xfe128000 0x0 0x20>;
new file mode 100644
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+
+#ifndef __DT_BINDINGS_ROCKCHIP_VOP2_H
+#define __DT_BINDINGS_ROCKCHIP_VOP2_H
+
+#define RK3568_VOP2_EP_RGB 0
+#define RK3568_VOP2_EP_HDMI 1
+#define RK3568_VOP2_EP_EDP 2
+#define RK3568_VOP2_EP_MIPI0 3
+#define RK3568_VOP2_EP_LVDS0 4
+#define RK3568_VOP2_EP_MIPI1 5
+#define RK3568_VOP2_EP_LVDS1 6
+
+#endif /* __DT_BINDINGS_ROCKCHIP_VOP2_H */
The VOP2 is the display output controller on the RK3568. Add the node for it to the dtsi file along with the required display-subsystem node and the iommu node. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm64/boot/dts/rockchip/rk3566.dtsi | 4 ++ arch/arm64/boot/dts/rockchip/rk3568.dtsi | 4 ++ arch/arm64/boot/dts/rockchip/rk356x.dtsi | 50 ++++++++++++++++++++++++ include/dt-bindings/soc/rockchip,vop2.h | 14 +++++++ 4 files changed, 72 insertions(+) create mode 100644 include/dt-bindings/soc/rockchip,vop2.h