diff mbox series

[PATCHv1,14/19] gpio: rockchip: add support for rk3588

Message ID 20220422170920.401914-15-sebastian.reichel@collabora.com (mailing list archive)
State New, archived
Headers show
Series Basic RK3588 Support | expand

Commit Message

Sebastian Reichel April 22, 2022, 5:09 p.m. UTC 
From: Jianqun Xu <jay.xu@rock-chips.com>

Add V2.1 rockchip gpio controller type, which is part of the
RK3588 SoC.

Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/gpio/gpio-rockchip.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Linus Walleij April 22, 2022, 8:35 p.m. UTC | #1 
On Fri, Apr 22, 2022 at 7:09 PM Sebastian Reichel
<sebastian.reichel@collabora.com> wrote:

> From: Jianqun Xu <jay.xu@rock-chips.com>
>
> Add V2.1 rockchip gpio controller type, which is part of the
> RK3588 SoC.
>
> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

This looks like something that can just be merged to Bartosz
tree as there are no dependencies on the other patches.

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c
index 099e358d2491..f0e279665525 100644
--- a/drivers/gpio/gpio-rockchip.c
+++ b/drivers/gpio/gpio-rockchip.c
@@ -26,6 +26,7 @@ 
 
 #define GPIO_TYPE_V1		(0)           /* GPIO Version ID reserved */
 #define GPIO_TYPE_V2		(0x01000C2B)  /* GPIO Version ID 0x01000C2B */
+#define GPIO_TYPE_V2_1		(0x0101157C)  /* GPIO Version ID 0x0101157C */
 
 static const struct rockchip_gpio_regs gpio_regs_v1 = {
 	.port_dr = 0x00,
@@ -663,7 +664,7 @@  static int rockchip_get_bank_data(struct rockchip_pin_bank *bank)
 	id = readl(bank->reg_base + gpio_regs_v2.version_id);
 
 	/* If not gpio v2, that is default to v1. */
-	if (id == GPIO_TYPE_V2) {
+	if (id == GPIO_TYPE_V2 || id == GPIO_TYPE_V2_1) {
 		bank->gpio_regs = &gpio_regs_v2;
 		bank->gpio_type = GPIO_TYPE_V2;
 		bank->db_clk = of_clk_get(bank->of_node, 1);