diff mbox series

[v2,1/3] dt-bindings: net: convert emac_rockchip.txt to YAML

Message ID 20220603163539.537-1-jbx6244@gmail.com (mailing list archive)
State New, archived
Headers show
Series [v2,1/3] dt-bindings: net: convert emac_rockchip.txt to YAML | expand

Commit Message

Johan Jonker June 3, 2022, 4:35 p.m. UTC
Convert emac_rockchip.txt to YAML.

Changes against original bindings:
  Add mdio sub node.
  Add extra clock for rk3036

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---

Changed V2:
  use phy
  rename to rockchip,emac.yaml
  add more requirements
---
 .../devicetree/bindings/net/emac_rockchip.txt |  52 --------
 .../bindings/net/rockchip,emac.yaml           | 115 ++++++++++++++++++
 2 files changed, 115 insertions(+), 52 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/net/emac_rockchip.txt
 create mode 100644 Documentation/devicetree/bindings/net/rockchip,emac.yaml

Comments

Rob Herring (Arm) June 3, 2022, 6:30 p.m. UTC | #1
On Fri, 03 Jun 2022 18:35:37 +0200, Johan Jonker wrote:
> Convert emac_rockchip.txt to YAML.
> 
> Changes against original bindings:
>   Add mdio sub node.
>   Add extra clock for rk3036
> 
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> ---
> 
> Changed V2:
>   use phy
>   rename to rockchip,emac.yaml
>   add more requirements
> ---
>  .../devicetree/bindings/net/emac_rockchip.txt |  52 --------
>  .../bindings/net/rockchip,emac.yaml           | 115 ++++++++++++++++++
>  2 files changed, 115 insertions(+), 52 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/net/emac_rockchip.txt
>  create mode 100644 Documentation/devicetree/bindings/net/rockchip,emac.yaml
> 

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/


ethernet@10200000: compatible: ['rockchip,rk3036-emac', 'snps,arc-emac'] is too long
	arch/arm/boot/dts/rk3036-evb.dtb
	arch/arm/boot/dts/rk3036-kylin.dtb

ethernet@10200000: 'mdio' is a required property
	arch/arm/boot/dts/rk3036-evb.dtb
	arch/arm/boot/dts/rk3036-kylin.dtb

ethernet@10204000: 'mdio' is a required property
	arch/arm/boot/dts/rk3066a-marsboard.dtb
	arch/arm/boot/dts/rk3066a-rayeager.dtb
	arch/arm/boot/dts/rk3188-radxarock.dtb
Rob Herring (Arm) June 9, 2022, 5:44 p.m. UTC | #2
On Fri, 03 Jun 2022 18:35:37 +0200, Johan Jonker wrote:
> Convert emac_rockchip.txt to YAML.
> 
> Changes against original bindings:
>   Add mdio sub node.
>   Add extra clock for rk3036
> 
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> ---
> 
> Changed V2:
>   use phy
>   rename to rockchip,emac.yaml
>   add more requirements
> ---
>  .../devicetree/bindings/net/emac_rockchip.txt |  52 --------
>  .../bindings/net/rockchip,emac.yaml           | 115 ++++++++++++++++++
>  2 files changed, 115 insertions(+), 52 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/net/emac_rockchip.txt
>  create mode 100644 Documentation/devicetree/bindings/net/rockchip,emac.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Rob Herring (Arm) Aug. 1, 2022, 2:30 p.m. UTC | #3
On Fri, 03 Jun 2022 18:35:37 +0200, Johan Jonker wrote:
> Convert emac_rockchip.txt to YAML.
> 
> Changes against original bindings:
>   Add mdio sub node.
>   Add extra clock for rk3036
> 
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> ---
> 
> Changed V2:
>   use phy
>   rename to rockchip,emac.yaml
>   add more requirements
> ---
>  .../devicetree/bindings/net/emac_rockchip.txt |  52 --------
>  .../bindings/net/rockchip,emac.yaml           | 115 ++++++++++++++++++
>  2 files changed, 115 insertions(+), 52 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/net/emac_rockchip.txt
>  create mode 100644 Documentation/devicetree/bindings/net/rockchip,emac.yaml
> 

Looks like this fell through the cracks. Applied, thanks!
Heiko Stübner Sept. 9, 2022, 11:10 p.m. UTC | #4
On Fri, 3 Jun 2022 18:35:37 +0200, Johan Jonker wrote:
> Convert emac_rockchip.txt to YAML.
> 
> Changes against original bindings:
>   Add mdio sub node.
>   Add extra clock for rk3036

Applied, thanks!

[2/3] ARM: dts: rockchip: fix rk3036 emac node compatible string
      commit: d28b680a34948d7634b824b1fc7546e9dc8422fb
[3/3] ARM: dts: rockchip: restyle emac nodes
      commit: 1dabb74971b38d966ecef566bafddc4a34f4db9d

Best regards,
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/emac_rockchip.txt b/Documentation/devicetree/bindings/net/emac_rockchip.txt
deleted file mode 100644
index 05bd7dafc..000000000
--- a/Documentation/devicetree/bindings/net/emac_rockchip.txt
+++ /dev/null
@@ -1,52 +0,0 @@ 
-* ARC EMAC 10/100 Ethernet platform driver for Rockchip RK3036/RK3066/RK3188 SoCs
-
-Required properties:
-- compatible: should be "rockchip,<name>-emac"
-   "rockchip,rk3036-emac": found on RK3036 SoCs
-   "rockchip,rk3066-emac": found on RK3066 SoCs
-   "rockchip,rk3188-emac": found on RK3188 SoCs
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the EMAC interrupts
-- rockchip,grf: phandle to the syscon grf used to control speed and mode
-  for emac.
-- phy: see ethernet.txt file in the same directory.
-- phy-mode: see ethernet.txt file in the same directory.
-
-Optional properties:
-- phy-supply: phandle to a regulator if the PHY needs one
-
-Clock handling:
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Shall be "hclk" for the host clock needed to calculate and set
-  polling period of EMAC and "macref" for the reference clock needed to transfer
-  data to and from the phy.
-
-Child nodes of the driver are the individual PHY devices connected to the
-MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus.
-
-Examples:
-
-ethernet@10204000 {
-	compatible = "rockchip,rk3188-emac";
-	reg = <0xc0fc2000 0x3c>;
-	interrupts = <6>;
-	mac-address = [ 00 11 22 33 44 55 ];
-
-	clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
-	clock-names = "hclk", "macref";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
-
-	rockchip,grf = <&grf>;
-
-	phy = <&phy0>;
-	phy-mode = "rmii";
-	phy-supply = <&vcc_rmii>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	phy0: ethernet-phy@0 {
-	      reg = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/rockchip,emac.yaml b/Documentation/devicetree/bindings/net/rockchip,emac.yaml
new file mode 100644
index 000000000..a6d4f14df
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/rockchip,emac.yaml
@@ -0,0 +1,115 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/rockchip,emac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3036/RK3066/RK3188 Ethernet Media Access Controller (EMAC)
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3036-emac
+      - rockchip,rk3066-emac
+      - rockchip,rk3188-emac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: host clock
+      - description: reference clock
+      - description: mac TX/RX clock
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: hclk
+      - const: macref
+      - const: macclk
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon GRF used to control speed and mode for the EMAC.
+
+  phy-supply:
+    description:
+      Phandle to a regulator if the PHY needs one.
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - rockchip,grf
+  - phy
+  - phy-mode
+  - mdio
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3036-emac
+
+    then:
+      properties:
+        clocks:
+          minItems: 3
+
+        clock-names:
+          minItems: 3
+
+    else:
+      properties:
+        clocks:
+          maxItems: 2
+
+        clock-names:
+          maxItems: 2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3188-cru-common.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@10204000 {
+      compatible = "rockchip,rk3188-emac";
+      reg = <0xc0fc2000 0x3c>;
+      interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
+      clock-names = "hclk", "macref";
+      rockchip,grf = <&grf>;
+      pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+      pinctrl-names = "default";
+      phy = <&phy0>;
+      phy-mode = "rmii";
+      phy-supply = <&vcc_rmii>;
+
+      mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        phy0: ethernet-phy@0 {
+          reg = <1>;
+        };
+      };
+    };