@@ -57,7 +57,7 @@ &gmac0 {
assigned-clock-rates = <0>, <125000000>;
clock_in_out = "output";
phy-handle = <&rgmii_phy0>;
- phy-mode = "rgmii-id";
+ phy-mode = "rgmii";
pinctrl-names = "default";
pinctrl-0 = <&gmac0_miim
&gmac0_tx_bus2
@@ -79,9 +79,6 @@ rgmii_phy0: ethernet-phy@1 {
reg = <1>;
pinctrl-0 = <ð_phy0_reset_pin>;
pinctrl-names = "default";
- reset-assert-us = <10000>;
- reset-deassert-us = <50000>;
- reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
};
};
@@ -115,7 +112,7 @@ &pcie3x2 {
&pinctrl {
gmac0 {
eth_phy0_reset_pin: eth-phy0-reset-pin {
- rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
- Changed phy-mode to rgmii. - Fixed pull type in pinctrl for gmac0. - Removed duplicate properties in mdio node. These properties are defined in the gmac0 node already. Fixes: c6629b9a6738 ("arm64: dts: rockchip: Add FriendlyElec Nanopi R5S") Signed-off-by: Tianling Shen <cnsztl@gmail.com> --- arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)