| Message ID | 20230705144255.115299-3-chris.obbard@collabora.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Disable HS400 for eMMC on Radxa ROCK 4 SBCs | expand |
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts index 028eb508ae30..8bfd5f88d1ef 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts @@ -548,9 +548,8 @@ &saradc { &sdhci { max-frequency = <150000000>; bus-width = <8>; - mmc-hs400-1_8v; + mmc-hs200-1_8v; non-removable; - mmc-hs400-enhanced-strobe; status = "okay"; };
There is some instablity with some eMMC modules on ROCK Pi 4 SBCs running in HS400 mode. This ends up resulting in some block errors after a while or after a "heavy" operation utilising the eMMC (e.g. resizing a filesystem). An example of these errors is as follows: [ 289.171014] mmc1: running CQE recovery [ 290.048972] mmc1: running CQE recovery [ 290.054834] mmc1: running CQE recovery [ 290.060817] mmc1: running CQE recovery [ 290.061337] blk_update_request: I/O error, dev mmcblk1, sector 1411072 op 0x1:(WRITE) flags 0x800 phys_seg 36 prio class 0 [ 290.061370] EXT4-fs warning (device mmcblk1p1): ext4_end_bio:348: I/O error 10 writing to inode 29547 starting block 176466) [ 290.061484] Buffer I/O error on device mmcblk1p1, logical block 172288 [ 290.061531] Buffer I/O error on device mmcblk1p1, logical block 172289 [ 290.061551] Buffer I/O error on device mmcblk1p1, logical block 172290 [ 290.061574] Buffer I/O error on device mmcblk1p1, logical block 172291 [ 290.061592] Buffer I/O error on device mmcblk1p1, logical block 172292 [ 290.061615] Buffer I/O error on device mmcblk1p1, logical block 172293 [ 290.061632] Buffer I/O error on device mmcblk1p1, logical block 172294 [ 290.061654] Buffer I/O error on device mmcblk1p1, logical block 172295 [ 290.061673] Buffer I/O error on device mmcblk1p1, logical block 172296 [ 290.061695] Buffer I/O error on device mmcblk1p1, logical block 172297 Disabling the Command Queue seems to stop the CQE recovery from running, but doesn't seem to improve the I/O errors. Until this can be investigated further, disable HS400 mode on the ROCK Pi 4 SBCs to at least stop I/O errors from occurring. Fixes: 246450344dad ("arm64: dts: rockchip: rk3399: Radxa ROCK 4C+") Signed-off-by: Christopher Obbard <chris.obbard@collabora.com> --- arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)