From patchwork Mon Jul 10 15:49:32 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andy Shevchenko X-Patchwork-Id: 13307353 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 72860EB64DA for ; Mon, 10 Jul 2023 15:51:24 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=ZBHGOlwft9Aqzr/yT8WTkowK4QyJtB52perpe58JvUQ=; b=03gXxx2a+8Dn6Z o/Cipcx9azAa1FqmDxTxY5E1ZdC27SErO4LNy/txkzF8L4UscmYbiXwaRJ9hBAsK8gJkIezBHKS8+ Fuief7w+578rrgk0+G9Dt93kGVPN+RHqyy5L8rytTc2DnljpJGtgstYcoevZl00uk97HgJgykSyD7 LJirGCk+fQBsaiLne24yWiZDbEW/iVvsQY6EWkDRt0PUEjXLSUA0jJskPIHuoXP/H0fzed7uZQ8I4 6cXWqZsYT3iDPzO/h+srKMDMUdkXPOWGBPsYCJ1e1NRC8i3pXUaStUhgEHOyYZI7kxhc3WN09SkYW s6mWHBLouhmLpsoqfkRA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1qItAS-00C5J6-1z; Mon, 10 Jul 2023 15:51:16 +0000 Received: from mga11.intel.com ([192.55.52.93]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1qIt9B-00C3qO-30; Mon, 10 Jul 2023 15:50:02 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1689004197; x=1720540197; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=pXRHx4OKVyPhzKBBfkn4k3c8ye7f1YNOMH6JkwpbZi4=; b=nXflHYcZi2IEMglUZqcKXKtpqkqX8xyRURYwRCkhuLNagF1rGLTGPHsf DopjL6cIyL7QEEkzYkbYeOMJeHWIHmem1iJCZ2lrog4MsQ0Pxl52A5d2m g9wO+7eEp9J4lSwkpu1gJ6l1ZHUFsjb9YEm+6NQsf1tnMEulekONHsFSr v0nfjGBubApLVpLvZR+GbWBoPRjhGya/7Z7JvjHjtwyf2XCkPj1MgrmQ0 10mLphZp9Iy662eqCz0EiYh1PqJBuW/uJ+sAJvUQlgRzOeqIL1Mei851+ hCN2Cjdl7+bM48ShzmnaptBnft9+lm2IRSSLxnw9J9ceJrKXsUZ7/yf3I A==; X-IronPort-AV: E=McAfee;i="6600,9927,10767"; a="361842636" X-IronPort-AV: E=Sophos;i="6.01,194,1684825200"; d="scan'208";a="361842636" Received: from orsmga002.jf.intel.com ([10.7.209.21]) by fmsmga102.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 10 Jul 2023 08:49:54 -0700 X-ExtLoop1: 1 X-IronPort-AV: E=McAfee;i="6600,9927,10767"; a="720743967" X-IronPort-AV: E=Sophos;i="6.01,194,1684825200"; d="scan'208";a="720743967" Received: from black.fi.intel.com ([10.237.72.28]) by orsmga002.jf.intel.com with ESMTP; 10 Jul 2023 08:49:41 -0700 Received: by black.fi.intel.com (Postfix, from userid 1003) id 01240888; Mon, 10 Jul 2023 18:49:34 +0300 (EEST) From: Andy Shevchenko To: Mark Brown , Cristian Ciocaltea , Yang Yingliang , Andy Shevchenko , Amit Kumar Mahapatra via Alsa-devel , Neil Armstrong , Tharun Kumar P , Vijaya Krishna Nivarthi , =?utf-8?q?Uwe_Kleine-K?= =?utf-8?q?=C3=B6nig?= , linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-amlogic@lists.infradead.org, linux-mediatek@lists.infradead.org, linux-arm-msm@vger.kernel.org, linux-rockchip@lists.infradead.org, linux-riscv@lists.infradead.org, linux-stm32@st-md-mailman.stormreply.com, linux-trace-kernel@vger.kernel.org, netdev@vger.kernel.org Cc: Sanjay R Mehta , Radu Pirea , Nicolas Ferre , Alexandre Belloni , Claudiu Beznea , Tudor Ambarus , Serge Semin , Shawn Guo , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam , NXP Linux Team , Kevin Hilman , Jerome Brunet , Martin Blumenstingl , Matthias Brugger , AngeloGioacchino Del Regno , Andy Gross , Bjorn Andersson , Konrad Dybcio , Heiko Stuebner , Palmer Dabbelt , Paul Walmsley , Orson Zhai , Baolin Wang , Chunyan Zhang , Alain Volmat , Maxime Coquelin , Alexandre Torgue , Max Filippov , Steven Rostedt , Masami Hiramatsu , Richard Cochran Subject: [PATCH v2 15/15] spi: Fix spelling typos and acronyms capitalization Date: Mon, 10 Jul 2023 18:49:32 +0300 Message-Id: <20230710154932.68377-16-andriy.shevchenko@linux.intel.com> X-Mailer: git-send-email 2.40.0.1.gaa8946217a0b In-Reply-To: <20230710154932.68377-1-andriy.shevchenko@linux.intel.com> References: <20230710154932.68377-1-andriy.shevchenko@linux.intel.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230710_084958_024352_FBC684AB X-CRM114-Status: GOOD ( 35.68 ) X-BeenThere: linux-rockchip@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: Upstream kernel work for Rockchip platforms List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "Linux-rockchip" Errors-To: linux-rockchip-bounces+linux-rockchip=archiver.kernel.org@lists.infradead.org Fix - spelling typos - capitalization of acronyms in the comments. While at it, fix the multi-line comment style. Signed-off-by: Andy Shevchenko --- drivers/spi/spi.c | 54 ++++++++------- include/linux/spi/spi.h | 137 ++++++++++++++++++++----------------- include/trace/events/spi.h | 2 +- 3 files changed, 104 insertions(+), 89 deletions(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index bcabae98cb7c..43f7c9b18676 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -682,7 +682,7 @@ static int __spi_add_device(struct spi_device *spi) * @spi: spi_device to register * * Companion function to spi_alloc_device. Devices allocated with - * spi_alloc_device can be added onto the spi bus with this function. + * spi_alloc_device can be added onto the SPI bus with this function. * * Return: 0 on success; negative errno on failure */ @@ -878,7 +878,7 @@ int spi_register_board_info(struct spi_board_info const *info, unsigned n) * spi_res_alloc - allocate a spi resource that is life-cycle managed * during the processing of a spi_message while using * spi_transfer_one - * @spi: the spi device for which we allocate memory + * @spi: the SPI device for which we allocate memory * @release: the release code to execute for this resource * @size: size to alloc and return * @gfp: GFP allocation flags @@ -904,7 +904,7 @@ static void *spi_res_alloc(struct spi_device *spi, spi_res_release_t release, } /** - * spi_res_free - free an spi resource + * spi_res_free - free an SPI resource * @res: pointer to the custom data of a resource */ static void spi_res_free(void *res) @@ -920,7 +920,7 @@ static void spi_res_free(void *res) /** * spi_res_add - add a spi_res to the spi_message - * @message: the spi message + * @message: the SPI message * @res: the spi_resource */ static void spi_res_add(struct spi_message *message, void *res) @@ -932,7 +932,7 @@ static void spi_res_add(struct spi_message *message, void *res) } /** - * spi_res_release - release all spi resources for this message + * spi_res_release - release all SPI resources for this message * @ctlr: the @spi_controller * @message: the @spi_message */ @@ -1392,7 +1392,7 @@ int spi_delay_to_ns(struct spi_delay *_delay, struct spi_transfer *xfer) return -EINVAL; /* * If there is unknown effective speed, approximate it - * by underestimating with half of the requested hz. + * by underestimating with half of the requested Hz. */ hz = xfer->effective_speed_hz ?: xfer->speed_hz / 2; if (!hz) @@ -1707,11 +1707,11 @@ static int __spi_pump_transfer_message(struct spi_controller *ctlr, } /** - * __spi_pump_messages - function which processes spi message queue + * __spi_pump_messages - function which processes SPI message queue * @ctlr: controller to process queue for * @in_kthread: true if we are in the context of the message pump thread * - * This function checks if there is any spi message in the queue that + * This function checks if there is any SPI message in the queue that * needs processing and if so call out to the driver to initialize hardware * and transfer each message. * @@ -1726,7 +1726,7 @@ static void __spi_pump_messages(struct spi_controller *ctlr, bool in_kthread) unsigned long flags; int ret; - /* Take the IO mutex */ + /* Take the I/O mutex */ mutex_lock(&ctlr->io_mutex); /* Lock queue */ @@ -2137,8 +2137,8 @@ static int __spi_queued_transfer(struct spi_device *spi, /** * spi_queued_transfer - transfer function for queued transfers - * @spi: spi device which is requesting transfer - * @msg: spi message which is to handled is queued to driver queue + * @spi: SPI device which is requesting transfer + * @msg: SPI message which is to handled is queued to driver queue * * Return: zero on success, else a negative error code. */ @@ -2464,7 +2464,7 @@ static int acpi_spi_count(struct acpi_resource *ares, void *data) * acpi_spi_count_resources - Count the number of SpiSerialBus resources * @adev: ACPI device * - * Returns the number of SpiSerialBus resources in the ACPI-device's + * Return: the number of SpiSerialBus resources in the ACPI-device's * resource-list; or a negative error code. */ int acpi_spi_count_resources(struct acpi_device *adev) @@ -2598,10 +2598,10 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data) * @adev: ACPI Device for the spi device * @index: Index of the spi resource inside the ACPI Node * - * This should be used to allocate a new spi device from and ACPI Node. - * The caller is responsible for calling spi_add_device to register the spi device. + * This should be used to allocate a new SPI device from and ACPI Device node. + * The caller is responsible for calling spi_add_device to register the SPI device. * - * If ctlr is set to NULL, the Controller for the spi device will be looked up + * If ctlr is set to NULL, the Controller for the SPI device will be looked up * using the resource. * If index is set to -1, index is not used. * Note: If index is -1, ctlr must be set. @@ -3299,7 +3299,8 @@ void spi_unregister_controller(struct spi_controller *ctlr) if (IS_ENABLED(CONFIG_SPI_DYNAMIC)) mutex_unlock(&ctlr->add_lock); - /* Release the last reference on the controller if its driver + /* + * Release the last reference on the controller if its driver * has not yet been converted to devm_spi_alloc_master/slave(). */ if (!ctlr->devm_allocated) @@ -3512,7 +3513,7 @@ static int __spi_split_transfer_maxsize(struct spi_controller *ctlr, /* All the others need rx_buf/tx_buf also set */ for (i = 1, offset = maxsize; i < count; offset += maxsize, i++) { - /* Update rx_buf, tx_buf and dma */ + /* Update rx_buf, tx_buf and DMA */ if (xfers[i].rx_buf) xfers[i].rx_buf += offset; if (xfers[i].rx_dma) @@ -3582,7 +3583,7 @@ EXPORT_SYMBOL_GPL(spi_split_transfers_maxsize); /** - * spi_split_transfers_maxwords - split spi transfers into multiple transfers + * spi_split_transfers_maxwords - split SPI transfers into multiple transfers * when an individual transfer exceeds a * certain number of SPI words * @ctlr: the @spi_controller for this transfer @@ -3625,7 +3626,8 @@ EXPORT_SYMBOL_GPL(spi_split_transfers_maxwords); /*-------------------------------------------------------------------------*/ -/* Core methods for SPI controller protocol drivers. Some of the +/* + * Core methods for SPI controller protocol drivers. Some of the * other core methods are currently defined as inline functions. */ @@ -3685,7 +3687,7 @@ static int spi_set_cs_timing(struct spi_device *spi) * changes those settings, and must be called from a context that can sleep. * Except for SPI_CS_HIGH, which takes effect immediately, the changes take * effect the next time the device is selected and data is transferred to - * or from it. When this function returns, the spi device is deselected. + * or from it. When this function returns, the SPI device is deselected. * * Note that this call will fail if the protocol driver specifies an option * that the underlying controller or its driver does not support. For @@ -4025,7 +4027,7 @@ static int __spi_async(struct spi_device *spi, struct spi_message *message) * spi_async - asynchronous SPI transfer * @spi: device with which data will be exchanged * @message: describes the data transfers, including completion callback - * Context: any (irqs may be blocked, etc) + * Context: any (IRQs may be blocked, etc) * * This call may be used in_irq and other contexts which can't sleep, * as well as from task contexts which can sleep. @@ -4079,7 +4081,7 @@ EXPORT_SYMBOL_GPL(spi_async); * spi_async_locked - version of spi_async with exclusive bus usage * @spi: device with which data will be exchanged * @message: describes the data transfers, including completion callback - * Context: any (irqs may be blocked, etc) + * Context: any (IRQs may be blocked, etc) * * This call may be used in_irq and other contexts which can't sleep, * as well as from task contexts which can sleep. @@ -4342,9 +4344,9 @@ static u8 *buf; /** * spi_write_then_read - SPI synchronous write followed by read * @spi: device with which data will be exchanged - * @txbuf: data to be written (need not be dma-safe) + * @txbuf: data to be written (need not be DMA-safe) * @n_tx: size of txbuf, in bytes - * @rxbuf: buffer into which data will be read (need not be dma-safe) + * @rxbuf: buffer into which data will be read (need not be DMA-safe) * @n_rx: size of rxbuf, in bytes * Context: can sleep * @@ -4355,7 +4357,7 @@ static u8 *buf; * * Parameters to this routine are always copied using a small buffer. * Performance-sensitive or bulk transfer code should instead use - * spi_{async,sync}() calls with dma-safe buffers. + * spi_{async,sync}() calls with DMA-safe buffers. * * Return: zero on success, else a negative error code. */ @@ -4400,7 +4402,7 @@ int spi_write_then_read(struct spi_device *spi, x[0].tx_buf = local_buf; x[1].rx_buf = local_buf + n_tx; - /* Do the i/o */ + /* Do the I/O */ status = spi_sync(spi, &message); if (status == 0) memcpy(rxbuf, x[1].rx_buf, n_rx); diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 43f6c3f71a76..e40ebffbf4ea 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -52,7 +52,7 @@ extern struct bus_type spi_bus_type; /** * struct spi_statistics - statistics for spi transfers - * @syncp: seqcount to protect members in this struct for per-cpu udate + * @syncp: seqcount to protect members in this struct for per-cpu update * on 32-bit systems * * @messages: number of spi-messages handled @@ -71,7 +71,7 @@ extern struct bus_type spi_bus_type; * @bytes_rx: number of bytes received from device * * @transfer_bytes_histo: - * transfer bytes histogramm + * transfer bytes histogram * * @transfers_split_maxsize: * number of transfers that have been split because of @@ -172,7 +172,7 @@ extern void spi_transfer_cs_change_delay_exec(struct spi_message *msg, * the device will bind to the named driver and only the named driver. * Do not set directly, because core frees it; use driver_set_override() to * set or clear it. - * @cs_gpiod: gpio descriptor of the chipselect line (optional, NULL when + * @cs_gpiod: GPIO descriptor of the chipselect line (optional, NULL when * not using a GPIO line) * @word_delay: delay to be inserted between consecutive * words of a transfer @@ -228,7 +228,7 @@ struct spi_device { void *controller_data; char modalias[SPI_NAME_SIZE]; const char *driver_override; - struct gpio_desc *cs_gpiod; /* Chip select gpio desc */ + struct gpio_desc *cs_gpiod; /* Chip select GPIO descriptor */ struct spi_delay word_delay; /* Inter-word delay */ /* CS delays */ struct spi_delay cs_setup; @@ -239,7 +239,7 @@ struct spi_device { struct spi_statistics __percpu *pcpu_statistics; /* - * likely need more hooks for more protocol options affecting how + * Likely need more hooks for more protocol options affecting how * the controller talks to each chip, like: * - memory packing (12 bit samples into low bits, others zeroed) * - priority @@ -315,11 +315,11 @@ static inline void spi_set_csgpiod(struct spi_device *spi, u8 idx, struct gpio_d /** * struct spi_driver - Host side "protocol" driver * @id_table: List of SPI devices supported by this driver - * @probe: Binds this driver to the spi device. Drivers can verify + * @probe: Binds this driver to the SPI device. Drivers can verify * that the device is actually present, and may need to configure * characteristics (such as bits_per_word) which weren't needed for * the initial configuration done during system setup. - * @remove: Unbinds this driver from the spi device + * @remove: Unbinds this driver from the SPI device * @shutdown: Standard shutdown callback used during system state * transitions such as powerdown/halt and kexec * @driver: SPI device drivers should initialize the name and owner @@ -431,7 +431,7 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch * @queued: whether this controller is providing an internal message queue * @kworker: pointer to thread struct for message pump * @pump_messages: work struct for scheduling work to the message pump - * @queue_lock: spinlock to syncronise access to message queue + * @queue_lock: spinlock to synchronise access to message queue * @queue: message queue * @cur_msg: the currently in-flight message * @cur_msg_completion: a completion for the current in-flight message @@ -489,7 +489,7 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch * @unprepare_message: undo any work done by prepare_message(). * @slave_abort: abort the ongoing transfer request on an SPI slave controller * @target_abort: abort the ongoing transfer request on an SPI target controller - * @cs_gpiods: Array of GPIO descs to use as chip select lines; one per CS + * @cs_gpiods: Array of GPIO descriptors to use as chip select lines; one per CS * number. Any individual value may be NULL for CS lines that * are not GPIOs (driven by the SPI controller itself). * @use_gpio_descriptors: Turns on the code in the SPI core to parse and grab @@ -516,7 +516,7 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch * If the driver does not set this, the SPI core takes the snapshot as * close to the driver hand-over as possible. * @irq_flags: Interrupt enable state during PTP system timestamping - * @fallback: fallback to pio if dma transfer return failure with + * @fallback: fallback to PIO if DMA transfer return failure with * SPI_TRANS_FAIL_NO_START. * @queue_empty: signal green light for opportunistically skipping the queue * for spi_sync transfers. @@ -538,15 +538,17 @@ struct spi_controller { struct list_head list; - /* Other than negative (== assign one dynamically), bus_num is fully - * board-specific. usually that simplifies to being SOC-specific. - * example: one SOC has three SPI controllers, numbered 0..2, - * and one board's schematics might show it using SPI-2. software + /* + * Other than negative (== assign one dynamically), bus_num is fully + * board-specific. Usually that simplifies to being SoC-specific. + * example: one SoC has three SPI controllers, numbered 0..2, + * and one board's schematics might show it using SPI-2. Software * would normally use bus_num=2 for that controller. */ s16 bus_num; - /* chipselects will be integral to many controllers; some others + /* + * Chipselects will be integral to many controllers; some others * might use board-specific GPIOs. */ u16 num_chipselect; @@ -591,8 +593,8 @@ struct spi_controller { }; /* - * on some hardware transfer / message size may be constrained - * the limit may depend on device transfer settings + * On some hardware transfer / message size may be constrained + * the limit may depend on device transfer settings. */ size_t (*max_transfer_size)(struct spi_device *spi); size_t (*max_message_size)(struct spi_device *spi); @@ -610,7 +612,8 @@ struct spi_controller { /* Flag indicating that the SPI bus is locked for exclusive use */ bool bus_lock_flag; - /* Setup mode and clock, etc (spi driver may call many times). + /* + * Setup mode and clock, etc (SPI driver may call many times). * * IMPORTANT: this may be called when transfers to another * device are active. DO NOT UPDATE SHARED REGISTERS in ways @@ -628,18 +631,19 @@ struct spi_controller { */ int (*set_cs_timing)(struct spi_device *spi); - /* Bidirectional bulk transfers + /* + * Bidirectional bulk transfers * * + The transfer() method may not sleep; its main role is * just to add the message to the queue. * + For now there's no remove-from-queue operation, or * any other request management - * + To a given spi_device, message queueing is pure fifo + * + To a given spi_device, message queueing is pure FIFO * * + The controller's main job is to process its message queue, * selecting a chip (for masters), then transferring data * + If there are multiple spi_device children, the i/o queue - * arbitration algorithm is unspecified (round robin, fifo, + * arbitration algorithm is unspecified (round robin, FIFO, * priority, reservations, preemption, etc) * * + Chipselect stays active during the entire message @@ -720,7 +724,7 @@ struct spi_controller { const struct spi_controller_mem_ops *mem_ops; const struct spi_controller_mem_caps *mem_caps; - /* gpio chip select */ + /* GPIO chip select */ struct gpio_desc **cs_gpiods; bool use_gpio_descriptors; s8 unused_native_cs; @@ -804,7 +808,7 @@ void spi_take_timestamp_post(struct spi_controller *ctlr, struct spi_transfer *xfer, size_t progress, bool irqs_off); -/* The spi driver core manages memory for the spi_controller classdev */ +/* The SPI driver core manages memory for the spi_controller classdev */ extern struct spi_controller *__spi_alloc_controller(struct device *host, unsigned int size, bool slave); @@ -893,13 +897,13 @@ typedef void (*spi_res_release_t)(struct spi_controller *ctlr, void *res); /** - * struct spi_res - spi resource management structure + * struct spi_res - SPI resource management structure * @entry: list entry * @release: release code called prior to freeing this resource * @data: extra data allocated for the specific use-case * - * this is based on ideas from devres, but focused on life-cycle - * management during spi_message processing + * This is based on ideas from devres, but focused on life-cycle + * management during spi_message processing. */ struct spi_res { struct list_head entry; @@ -917,7 +921,7 @@ struct spi_res { * * The spi_messages themselves consist of a series of read+write transfer * segments. Those segments always read the same number of bits as they - * write; but one or the other is easily ignored by passing a null buffer + * write; but one or the other is easily ignored by passing a NULL buffer * pointer. (This is unlike most types of I/O API, because SPI hardware * is full duplex.) * @@ -928,8 +932,8 @@ struct spi_res { /** * struct spi_transfer - a read/write buffer pair - * @tx_buf: data to be written (dma-safe memory), or NULL - * @rx_buf: data to be read (dma-safe memory), or NULL + * @tx_buf: data to be written (DMA-safe memory), or NULL + * @rx_buf: data to be read (DMA-safe memory), or NULL * @tx_dma: DMA address of tx_buf, if @spi_message.is_dma_mapped * @rx_dma: DMA address of rx_buf, if @spi_message.is_dma_mapped * @tx_nbits: number of bits used for writing. If 0 the default @@ -952,7 +956,7 @@ struct spi_res { * @word_delay: inter word delay to be introduced after each word size * (set by bits_per_word) transmission. * @effective_speed_hz: the effective SCK-speed that was used to - * transfer this transfer. Set to 0 if the spi bus driver does + * transfer this transfer. Set to 0 if the SPI bus driver does * not support it. * @transfer_list: transfers are sequenced through @spi_message.transfers * @tx_sg: Scatterlist for transmit, currently not for client use @@ -981,16 +985,16 @@ struct spi_res { * transmitting the "pre" word, and the "post" timestamp after receiving * transmit confirmation from the controller for the "post" word. * @timestamped: true if the transfer has been timestamped - * @error: Error status logged by spi controller driver. + * @error: Error status logged by SPI controller driver. * * SPI transfers always write the same number of bytes as they read. * Protocol drivers should always provide @rx_buf and/or @tx_buf. * In some cases, they may also want to provide DMA addresses for * the data being transferred; that may reduce overhead, when the - * underlying driver uses dma. + * underlying driver uses DMA. * - * If the transmit buffer is null, zeroes will be shifted out - * while filling @rx_buf. If the receive buffer is null, the data + * If the transmit buffer is NULL, zeroes will be shifted out + * while filling @rx_buf. If the receive buffer is NULL, the data * shifted in will be discarded. Only "len" bytes shift out (or in). * It's an error to try to shift out a partial word. (For example, by * shifting out three bytes with word size of sixteen or twenty bits; @@ -1024,7 +1028,7 @@ struct spi_res { * Some devices need protocol transactions to be built from a series of * spi_message submissions, where the content of one message is determined * by the results of previous messages and where the whole transaction - * ends when the chipselect goes intactive. + * ends when the chipselect goes inactive. * * When SPI can transfer in 1x,2x or 4x. It can get this transfer information * from device through @tx_nbits and @rx_nbits. In Bi-direction, these @@ -1038,10 +1042,11 @@ struct spi_res { * and its transfers, ignore them until its completion callback. */ struct spi_transfer { - /* It's ok if tx_buf == rx_buf (right?) - * for MicroWire, one buffer must be null - * buffers must work with dma_*map_single() calls, unless - * spi_message.is_dma_mapped reports a pre-existing mapping + /* + * It's okay if tx_buf == rx_buf (right?). + * For MicroWire, one buffer must be NULL. + * Buffers must work with dma_*map_single() calls, unless + * spi_message.is_dma_mapped reports a pre-existing mapping. */ const void *tx_buf; void *rx_buf; @@ -1061,9 +1066,9 @@ struct spi_transfer { unsigned tx_nbits:3; unsigned rx_nbits:3; unsigned timestamped:1; -#define SPI_NBITS_SINGLE 0x01 /* 1bit transfer */ -#define SPI_NBITS_DUAL 0x02 /* 2bits transfer */ -#define SPI_NBITS_QUAD 0x04 /* 4bits transfer */ +#define SPI_NBITS_SINGLE 0x01 /* 1-bit transfer */ +#define SPI_NBITS_DUAL 0x02 /* 2-bit transfer */ +#define SPI_NBITS_QUAD 0x04 /* 4-bit transfer */ u8 bits_per_word; struct spi_delay delay; struct spi_delay cs_change_delay; @@ -1084,7 +1089,7 @@ struct spi_transfer { * struct spi_message - one multi-segment SPI transaction * @transfers: list of transfer segments in this transaction * @spi: SPI device to which the transaction is queued - * @is_dma_mapped: if true, the caller provided both dma and cpu virtual + * @is_dma_mapped: if true, the caller provided both DMA and CPU virtual * addresses for each transfer buffer * @complete: called to report transaction completions * @context: the argument to complete() when it's called @@ -1094,7 +1099,7 @@ struct spi_transfer { * @status: zero for success, else negative errno * @queue: for use by whichever driver currently owns the message * @state: for use by whichever driver currently owns the message - * @resources: for resource management when the spi message is processed + * @resources: for resource management when the SPI message is processed * @prepared: spi_prepare_message was called for the this message * @t: for use with spi_message_alloc() when message and transfers have * been allocated together @@ -1123,7 +1128,8 @@ struct spi_message { /* spi_prepare_message() was called for this message */ bool prepared; - /* REVISIT: we might want a flag affecting the behavior of the + /* + * REVISIT: we might want a flag affecting the behavior of the * last transfer ... allowing things like "read 16 bit length L" * immediately followed by "read L bytes". Basically imposing * a specific message scheduling algorithm. @@ -1141,14 +1147,15 @@ struct spi_message { unsigned frame_length; unsigned actual_length; - /* For optional use by whatever driver currently owns the + /* + * For optional use by whatever driver currently owns the * spi_message ... between calls to spi_async and then later * complete(), that's the spi_controller controller driver. */ struct list_head queue; void *state; - /* List of spi_res reources when the spi message is processed */ + /* List of spi_res resources when the SPI message is processed */ struct list_head resources; /* For embedding transfers into the memory of the message */ @@ -1188,7 +1195,7 @@ spi_transfer_delay_exec(struct spi_transfer *t) /** * spi_message_init_with_transfers - Initialize spi_message and append transfers * @m: spi_message to be initialized - * @xfers: An array of spi transfers + * @xfers: An array of SPI transfers * @num_xfers: Number of items in the xfer array * * This function initializes the given spi_message and adds each spi_transfer in @@ -1205,10 +1212,10 @@ struct spi_transfer *xfers, unsigned int num_xfers) spi_message_add_tail(&xfers[i], m); } -/* It's fine to embed message and transaction structures in other data +/* + * It's fine to embed message and transaction structures in other data * structures so long as you don't free them while they're in use. */ - static inline struct spi_message *spi_message_alloc(unsigned ntrans, gfp_t flags) { struct spi_message *m; @@ -1312,7 +1319,7 @@ typedef void (*spi_replaced_release_t)(struct spi_controller *ctlr, * replacements that have occurred * so that they can get reverted * @release: some extra release code to get executed prior to - * relasing this structure + * releasing this structure * @extradata: pointer to some extra data if requested or NULL * @replaced_transfers: transfers that have been replaced and which need * to get restored @@ -1322,9 +1329,9 @@ typedef void (*spi_replaced_release_t)(struct spi_controller *ctlr, * @inserted_transfers: array of spi_transfers of array-size @inserted, * that have been replacing replaced_transfers * - * note: that @extradata will point to @inserted_transfers[@inserted] + * Note: that @extradata will point to @inserted_transfers[@inserted] * if some extra allocation is requested, so alignment will be the same - * as for spi_transfers + * as for spi_transfers. */ struct spi_replaced_transfers { spi_replaced_release_t release; @@ -1350,7 +1357,8 @@ extern int spi_split_transfers_maxwords(struct spi_controller *ctlr, /*---------------------------------------------------------------------------*/ -/* All these synchronous SPI transfer routines are utilities layered +/* + * All these synchronous SPI transfer routines are utilities layered * over the core async transfer primitive. Here, "synchronous" means * they will sleep uninterruptibly until the async transfer completes. */ @@ -1493,7 +1501,7 @@ static inline ssize_t spi_w8r16(struct spi_device *spi, u8 cmd) * * Callable only from contexts that can sleep. * - * Return: the (unsigned) sixteen bit number returned by the device in cpu + * Return: the (unsigned) sixteen bit number returned by the device in CPU * endianness, or else a negative error code. */ static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd) @@ -1521,7 +1529,7 @@ static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd) * As a rule, SPI devices can't be probed. Instead, board init code * provides a table listing the devices which are present, with enough * information to bind and set up the device's driver. There's basic - * support for nonstatic configurations too; enough to handle adding + * support for non-static configurations too; enough to handle adding * parport adapters, or microcontrollers acting as USB-to-SPI bridges. */ @@ -1558,12 +1566,13 @@ static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd) * are active in some dynamic board configuration models. */ struct spi_board_info { - /* The device name and module name are coupled, like platform_bus; + /* + * The device name and module name are coupled, like platform_bus; * "modalias" is normally the driver name. * * platform_data goes to spi_device.dev.platform_data, * controller_data goes to spi_device.controller_data, - * irq is copied too + * IRQ is copied too. */ char modalias[SPI_NAME_SIZE]; const void *platform_data; @@ -1575,7 +1584,8 @@ struct spi_board_info { u32 max_speed_hz; - /* bus_num is board specific and matches the bus_num of some + /* + * bus_num is board specific and matches the bus_num of some * spi_controller that will probably be registered later. * * chip_select reflects how this chip is wired to that master; @@ -1584,12 +1594,14 @@ struct spi_board_info { u16 bus_num; u16 chip_select; - /* mode becomes spi_device.mode, and is essential for chips + /* + * mode becomes spi_device.mode, and is essential for chips * where the default of SPI_CS_HIGH = 0 is wrong. */ u32 mode; - /* ... may need additional spi_device chip config data here. + /* + * ... may need additional spi_device chip config data here. * avoid stuff protocol drivers can set; but include stuff * needed to behave without being bound to a driver: * - quirks like clock rate mattering when not selected @@ -1606,7 +1618,8 @@ spi_register_board_info(struct spi_board_info const *info, unsigned n) { return 0; } #endif -/* If you're hotplugging an adapter with devices (parport, usb, etc) +/* + * If you're hotplugging an adapter with devices (parport, USB, etc) * use spi_new_device() to describe each device. You can also call * spi_unregister_device() to start making that device vanish, but * normally that would be handled by spi_unregister_controller(). diff --git a/include/trace/events/spi.h b/include/trace/events/spi.h index c0248a8fa79c..e63d4a24d879 100644 --- a/include/trace/events/spi.h +++ b/include/trace/events/spi.h @@ -167,7 +167,7 @@ TRACE_EVENT(spi_message_done, ); /* - * consider a buffer valid if non-NULL and if it doesn't match the dummy buffer + * Consider a buffer valid if non-NULL and if it doesn't match the dummy buffer * that only exist to work with controllers that have SPI_CONTROLLER_MUST_TX or * SPI_CONTROLLER_MUST_RX. */