| Message ID | 20231216021019.1543811-1-CFSworks@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: rockchip: rk3588: Fix USB PD clocks | expand |
On Fri, 15 Dec 2023 19:10:19 -0700, Sam Edwards wrote: > The QoS blocks saved/restored when toggling the PD_USB power domain are > clocked by ACLK_USB. Attempting to access these memory regions without > that clock running will result in an indefinite CPU stall. > > The PD_USB node wasn't specifying this clock dependency, resulting in > hangs when trying to toggle the power domain (either on or off), unless > we get "lucky" and have ACLK_USB running for another reason at the time. > This "luck" can result from the bootloader leaving USB powered/clocked, > and if no built-in driver wants USB, Linux will disable the unused > PD+CLK on boot when {pd,clk}_ignore_unused aren't given. This can also > be unlucky because the two cleanup tasks run in parallel and race: if > the CLK is disabled first, the PD deactivation stalls the boot. In any > case, the PD cannot then be reenabled (if e.g. the driver loads later) > once the clock has been stopped. > > [...] Applied, thanks! [1/1] arm64: dts: rockchip: rk3588: Fix USB PD clocks commit: 44de8996ed5a10f08f2fe947182da6535edcfae5 I've changed the patch to only add the ACLK_USB. For the HCLK_* type, Rockchip added both the root as well as the actual controller clocks, so I guess it should be the same for the ACLK-type. Powerdomains are strange with their clock- synchronization, so I'm opting for better save than sorry ;-) Best regards,
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi index fd1b5d02ba16..32d7e49f03d3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi @@ -1341,8 +1341,7 @@ power-domain@RK3588_PD_RGA31 { power-domain@RK3588_PD_USB { reg = <RK3588_PD_USB>; clocks = <&cru PCLK_PHP_ROOT>, - <&cru ACLK_USB_ROOT>, - <&cru HCLK_USB_ROOT>, + <&cru ACLK_USB>, <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru HCLK_HOST1>,
The QoS blocks saved/restored when toggling the PD_USB power domain are clocked by ACLK_USB. Attempting to access these memory regions without that clock running will result in an indefinite CPU stall. The PD_USB node wasn't specifying this clock dependency, resulting in hangs when trying to toggle the power domain (either on or off), unless we get "lucky" and have ACLK_USB running for another reason at the time. This "luck" can result from the bootloader leaving USB powered/clocked, and if no built-in driver wants USB, Linux will disable the unused PD+CLK on boot when {pd,clk}_ignore_unused aren't given. This can also be unlucky because the two cleanup tasks run in parallel and race: if the CLK is disabled first, the PD deactivation stalls the boot. In any case, the PD cannot then be reenabled (if e.g. the driver loads later) once the clock has been stopped. Fix this by specifying a dependency on ACLK_USB, instead of only ACLK_USB_ROOT. The child-parent relationship means the former implies the latter anyway. By the same token, remove the redundant HCLK_USB_ROOT reference, since that's also implied by its HCLK_HOST* grandchildren. Fixes: c9211fa2602b8 ("arm64: dts: rockchip: Add base DT for rk3588 SoC") Signed-off-by: Sam Edwards <CFSworks@gmail.com> --- Hi list, Feel free to tell me to knock the HCLK_USB_ROOT change out of there, since it's not strictly necessary for this fix. It was a "while I'm at it, let's remove this redundant reference" thing. :) I also do not know quite enough about debugfs to know how to manually request clocks and PDs, but if such a mechanism exists, it would be a good way to confirm the correctness of this fix: ensure ACLK_USB is stopped, then try to toggle PD_USB a few times. Cheers, Sam --- arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)