| Message ID | 20240107223714.8158-1-sigmaris@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: rockchip: enable NanoPC-T6 MiniPCIe power | expand |
On 07/01/2024 23:37, Hugh Cole-Baker wrote: > The NanoPC-T6 has a Mini PCIe slot intended to be used for a 4G or LTE > modem. This slot has no PCIe functionality, only its USB 2.0 pins are > wired to the SoC, and its USIM pins are wired to a SIM card slot on the > board. Define the 3.3v supply for the slot so it can be used. > > Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com> > --- ... > > &combphy0_ps { > @@ -504,6 +516,10 @@ pcie_m2_1_pwren: pcie-m21-pwren { > }; > > usb { > + _4g_lte_pwren: 4g-lte-pwren { Labels start with alphanumeric characters. Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts index d7722772ecd8..d91af387f7c4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts @@ -159,6 +159,18 @@ vcc3v3_pcie30: vcc3v3-pcie30-regulator { regulator-max-microvolt = <3300000>; vin-supply = <&vcc5v0_sys>; }; + + vdd_4g_3v3: vdd-4g-3v3-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&_4g_lte_pwren>; + regulator-name = "vdd_4g_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; }; &combphy0_ps { @@ -504,6 +516,10 @@ pcie_m2_1_pwren: pcie-m21-pwren { }; usb { + _4g_lte_pwren: 4g-lte-pwren { + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + typec5v_pwren: typec5v-pwren { rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; @@ -884,6 +900,7 @@ &uart2 { }; &u2phy2_host { + phy-supply = <&vdd_4g_3v3>; status = "okay"; };
The NanoPC-T6 has a Mini PCIe slot intended to be used for a 4G or LTE modem. This slot has no PCIe functionality, only its USB 2.0 pins are wired to the SoC, and its USIM pins are wired to a SIM card slot on the board. Define the 3.3v supply for the slot so it can be used. Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com> --- I've based the names directly on the schematic [1] (page 29) which uses VDD_4G_3.3V and 4G_LTE_PWREN for the supply and enable signal respectively. This means the enable pinctrl label needs an initial underscore. I'm OK with changing that if it's considered ugly or there's a better suggested name. [1]: https://wiki.friendlyelec.com/wiki/images/9/97/NanoPC-T6_2301_SCH.PDF .../boot/dts/rockchip/rk3588-nanopc-t6.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)