diff mbox series

ARM: dts: rockchip: Drop interrupts property from pwm-rockchip nodes

Message ID 20240129113205.2453029-2-u.kleine-koenig@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series ARM: dts: rockchip: Drop interrupts property from pwm-rockchip nodes | expand

Commit Message

Uwe Kleine-König Jan. 29, 2024, 11:32 a.m. UTC 
The binding doesn't define interrupts and adding such a definition was
refused because it's unclear how they should ever be used and the
relevant registers are outside the PWM range. So drop them fixing
several dtbs_check warnings like:

	arch/arm/boot/dts/rockchip/rv1108-elgin-r1.dtb: pwm@10280030: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/pwm/pwm-rockchip.yaml#

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
Hello,

after I sent
https://lore.kernel.org/linux-pwm/20240106142654.1262758-2-u.kleine-koenig@pengutronix.de
the feedback in that thread and on irc was that instead of adding the
interrupts to the binding the right way to get rid of the warnings is to
drop the interrupt properties instead. This is implemented here.

Best regards
Uwe

 arch/arm/boot/dts/rockchip/rv1108.dtsi | 8 --------
 1 file changed, 8 deletions(-)


base-commit: 596764183be8ebb13352b281a442a1f1151c9b06

Comments

Heiko Stuebner Feb. 4, 2024, 11:17 a.m. UTC | #1 
On Mon, 29 Jan 2024 12:32:02 +0100, Uwe Kleine-König wrote:
> The binding doesn't define interrupts and adding such a definition was
> refused because it's unclear how they should ever be used and the
> relevant registers are outside the PWM range. So drop them fixing
> several dtbs_check warnings like:
> 
> 	arch/arm/boot/dts/rockchip/rv1108-elgin-r1.dtb: pwm@10280030: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
> 	from schema $id: http://devicetree.org/schemas/pwm/pwm-rockchip.yaml#
> 
> [...]

Applied, thanks!

[1/1] ARM: dts: rockchip: Drop interrupts property from pwm-rockchip nodes
      commit: f98643d8daf3443e3b414a82d0cb3d745f8c8bbc

Best regards,
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/rockchip/rv1108.dtsi b/arch/arm/boot/dts/rockchip/rv1108.dtsi
index abf3006f0a84..f3291f3bbc6f 100644
--- a/arch/arm/boot/dts/rockchip/rv1108.dtsi
+++ b/arch/arm/boot/dts/rockchip/rv1108.dtsi
@@ -196,7 +196,6 @@  spi: spi@10270000 {
 	pwm4: pwm@10280000 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280000 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -208,7 +207,6 @@  pwm4: pwm@10280000 {
 	pwm5: pwm@10280010 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280010 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -220,7 +218,6 @@  pwm5: pwm@10280010 {
 	pwm6: pwm@10280020 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280020 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -232,7 +229,6 @@  pwm6: pwm@10280020 {
 	pwm7: pwm@10280030 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280030 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -386,7 +382,6 @@  i2c0: i2c@20000000 {
 	pwm0: pwm@20040000 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040000 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -398,7 +393,6 @@  pwm0: pwm@20040000 {
 	pwm1: pwm@20040010 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040010 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -410,7 +404,6 @@  pwm1: pwm@20040010 {
 	pwm2: pwm@20040020 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040020 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -422,7 +415,6 @@  pwm2: pwm@20040020 {
 	pwm3: pwm@20040030 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040030 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";