Message ID | 20240527-kms-hdmi-connector-state-v15-17-c5af16c3aae2@kernel.org (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | drm/connector: Create HDMI Connector infrastructure | expand |
On Mon, May 27, 2024 at 03:58:06PM +0200, Maxime Ripard wrote: > The Broadcast RGB property has been documented as three separate entries > so far, each with a different set of values. > > The first one is pretty much the generic one: it's used by i915 and vc4, > and is the one used by all the compositors. > > The second one is used by the gma500 driver, and is a subset of the > first one: it can have the values "Full" or "Limited 16:235", but lack > the "Automatic" value. > > The third one however isn't used by any driver and documents the values > "off", "auto" and "on". > > It's unclear where the last one comes from. It was first documented in > commit 6c6a3996f2c5 ("Documentation: drm: describing drm properties > exposed by various drivers") which adds a number of properties used by > drivers, but without mentioning which driver was using what property. > > Grepping at the 6c6a3996f2c5 commit however, it looks like no driver is > actually using it, and a quick look at the entire kernel history doesn't > show any match either. > > At the time though, gma500 had an "audio" property used right next to > Broadcast RGB that did have the "off", "auto" and "on" values in the > same order. > > As such, it was probably a copy/paste or scripting error back then, and > there's never been such property used in the kernel. > > Either way, it certainly hasn't been used in a decade or two so we can > just get rid of it. > > Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > Signed-off-by: Maxime Ripard <mripard@kernel.org> > --- > Documentation/gpu/kms-properties.csv | 1 - > 1 file changed, 1 deletion(-) > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff --git a/Documentation/gpu/kms-properties.csv b/Documentation/gpu/kms-properties.csv index 0f9590834829..c3c50a277cc9 100644 --- a/Documentation/gpu/kms-properties.csv +++ b/Documentation/gpu/kms-properties.csv @@ -36,11 +36,10 @@ i915,Generic,"""Broadcast RGB""",ENUM,"{ ""Automatic"", ""Full"", ""Limited 16:2 ,,“tv_chroma_filter”,RANGE,"Min=0, Max= SDVO dependent",Connector,TBD ,,“tv_luma_filter”,RANGE,"Min=0, Max= SDVO dependent",Connector,TBD ,,“dot_crawl”,RANGE,"Min=0, Max=1",Connector,TBD ,SDVO-TV/LVDS,“brightness”,RANGE,"Min=0, Max= SDVO dependent",Connector,TBD CDV gma-500,Generic,"""Broadcast RGB""",ENUM,"{ “Full”, “Limited 16:235” }",Connector,TBD -,,"""Broadcast RGB""",ENUM,"{ “off”, “auto”, “on” }",Connector,TBD Poulsbo,Generic,“backlight”,RANGE,"Min=0, Max=100",Connector,TBD ,SDVO-TV,“mode”,ENUM,"{ ""NTSC_M"", ""NTSC_J"", ""NTSC_443"", ""PAL_B"" } etc.",Connector,TBD ,,"""left_margin""",RANGE,"Min=0, Max= SDVO dependent",Connector,TBD ,,"""right_margin""",RANGE,"Min=0, Max= SDVO dependent",Connector,TBD ,,"""top_margin""",RANGE,"Min=0, Max= SDVO dependent",Connector,TBD
The Broadcast RGB property has been documented as three separate entries so far, each with a different set of values. The first one is pretty much the generic one: it's used by i915 and vc4, and is the one used by all the compositors. The second one is used by the gma500 driver, and is a subset of the first one: it can have the values "Full" or "Limited 16:235", but lack the "Automatic" value. The third one however isn't used by any driver and documents the values "off", "auto" and "on". It's unclear where the last one comes from. It was first documented in commit 6c6a3996f2c5 ("Documentation: drm: describing drm properties exposed by various drivers") which adds a number of properties used by drivers, but without mentioning which driver was using what property. Grepping at the 6c6a3996f2c5 commit however, it looks like no driver is actually using it, and a quick look at the entire kernel history doesn't show any match either. At the time though, gma500 had an "audio" property used right next to Broadcast RGB that did have the "off", "auto" and "on" values in the same order. As such, it was probably a copy/paste or scripting error back then, and there's never been such property used in the kernel. Either way, it certainly hasn't been used in a decade or two so we can just get rid of it. Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Maxime Ripard <mripard@kernel.org> --- Documentation/gpu/kms-properties.csv | 1 - 1 file changed, 1 deletion(-)