diff mbox series

[v2,06/14] arm64: dts: rockchip: enable sata1+2 on Qnap-TS433

Message ID 20240721173723.919961-7-heiko@sntech.de (mailing list archive)
State New
Headers show
Series Expand available features on Qnap TS433 | expand

Commit Message

Heiko Stübner July 21, 2024, 5:37 p.m. UTC 
The TS433 has 4 bays. The last two are accessed via a pci-connected
sata controller, while the first two are accessed via the rk3568's
sata controllers. Enable these two now.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 .../boot/dts/rockchip/rk3568-qnap-ts433.dts    | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
index 4fbbdb735eb58..69bed01cbe4ed 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
@@ -80,6 +80,16 @@  &combphy0 {
 	status = "okay";
 };
 
+/* connected to sata1 */
+&combphy1 {
+	status = "okay";
+};
+
+/* connected to sata2 */
+&combphy2 {
+	status = "okay";
+};
+
 &gmac0 {
 	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
 	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
@@ -154,6 +164,14 @@  vcc5v0_otg_en: vcc5v0-otg-en {
 	};
 };
 
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
 &sdhci {
 	bus-width = <8>;
 	max-frequency = <200000000>;