diff mbox series

[v3,05/14] arm64: dts: rockchip: add stdout path on Qnap-TS433

Message ID 20240723195538.1133436-6-heiko@sntech.de (mailing list archive)
State New
Headers show
Series Expand available features on Qnap TS433 | expand

Commit Message

Heiko Stübner July 23, 2024, 7:55 p.m. UTC 
As most Rockchip boards do, the TS433 also uses uart2 for its serial
output. Set the correct chosen entry for it.

Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
index da735c4764f4d..be1c2286c2d3f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
@@ -13,6 +13,10 @@  / {
 	model = "Qnap TS-433-4G NAS System 4-Bay";
 	compatible = "qnap,ts433", "rockchip,rk3568";
 
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
 	dc_12v: regulator-dc-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "dc_12v";