diff mbox series

[1/2] arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma

Message ID 20240731-puma-emmc-6-v1-1-4e28eadf32d0@cherry.de (mailing list archive)
State New
Headers show
Series fix eMMC/SPI flash corruption when audio has been used on RK3399 Puma | expand

Commit Message

Quentin Schulz July 31, 2024, 11:05 a.m. UTC 
From: Quentin Schulz <quentin.schulz@cherry.de>

In commit 91419ae0420f ("arm64: dts: rockchip: use BCLK to GPIO switch
on rk3399"), an additional pinctrl state was added whose default pinmux
is for 8ch i2s0. However, Puma only has 2ch i2s0. It's been overriding
the pinctrl-0 property but the second property override was missed in
the aforementioned commit.

On Puma, a hardware slider called "BIOS Disable/Normal Boot" can disable
eMMC and SPI to force booting from SD card. Another software-controlled
GPIO is then configured to override this behavior to make eMMC and SPI
available without human intervention. This is currently done in U-Boot
and it was enough until the aforementioned commit.

Indeed, because of this additional not-yet-overridden property, this
software-controlled GPIO is now muxed in a state that does not override
this hardware slider anymore, rendering SPI and eMMC flashes unusable.

Let's override the property with the 2ch pinmux to fix this.

Fixes: 91419ae0420f ("arm64: dts: rockchip: use BCLK to GPIO switch on rk3399")
Cc: stable@vger.kernel.org
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
---
 arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index ccbe3a7a1d2c2..a782e614d9bba 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -409,6 +409,7 @@  vdd_cpu_b: regulator@60 {
 
 &i2s0 {
 	pinctrl-0 = <&i2s0_2ch_bus>;
+	pinctrl-1 = <&i2s0_2ch_bus_bclk_off>;
 	rockchip,playback-channels = <2>;
 	rockchip,capture-channels = <2>;
 	status = "okay";
@@ -417,8 +418,8 @@  &i2s0 {
 /*
  * As Q7 does not specify neither a global nor a RX clock for I2S these
  * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO.
- * Therefore we have to redefine the i2s0_2ch_bus definition to prevent
- * conflicts.
+ * Therefore we have to redefine the i2s0_2ch_bus and i2s0_2ch_bus_bclk_off
+ * definitions to prevent conflicts.
  */
 &i2s0_2ch_bus {
 	rockchip,pins =
@@ -428,6 +429,14 @@  &i2s0_2ch_bus {
 		<3 RK_PD7 1 &pcfg_pull_none>;
 };
 
+&i2s0_2ch_bus_bclk_off {
+	rockchip,pins =
+		<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
+		<3 RK_PD2 1 &pcfg_pull_none>,
+		<3 RK_PD3 1 &pcfg_pull_none>,
+		<3 RK_PD7 1 &pcfg_pull_none>;
+};
+
 &io_domains {
 	status = "okay";
 	bt656-supply = <&vcc_1v8>;