diff mbox series

[2/2] arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma

Message ID 20240731-puma-emmc-6-v1-2-4e28eadf32d0@cherry.de (mailing list archive)
State New
Headers show
Series fix eMMC/SPI flash corruption when audio has been used on RK3399 Puma | expand

Commit Message

Quentin Schulz July 31, 2024, 11:05 a.m. UTC 
From: Quentin Schulz <quentin.schulz@cherry.de>

The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module eMMC
and SPI flash powered-down initially (in fact it keeps the reset signal
asserted). BIOS_DISABLE_OVERRIDE pin allows to override that signal so
that eMMC and SPI can be used regardless of the state of the signal.

Let's make this GPIO a hog so that it's reserved and locked in the
proper state.

At the same time, make sure the pin is reserved for the hog and cannot
be requested by another node.

Cc: stable@vger.kernel.org
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
---
 arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index a782e614d9bba..d24444cdf54af 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -154,6 +154,22 @@  bios-disable-hog {
 	};
 };
 
+&gpio3 {
+	/*
+	 * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module
+	 * eMMC and SPI flash powered-down initially (in fact it keeps the
+	 * reset signal asserted). BIOS_DISABLE_OVERRIDE pin allows to override
+	 * that signal so that eMMC and SPI can be used regardless of the state
+	 * of the signal.
+	 */
+	bios-disable-override-hog {
+		gpios = <RK_PD5 GPIO_ACTIVE_LOW>;
+		gpio-hog;
+		line-name = "bios_disable_override";
+		output-high;
+	};
+};
+
 &gmac {
 	assigned-clocks = <&cru SCLK_RMII_SRC>;
 	assigned-clock-parents = <&clkin_gmac>;
@@ -458,9 +474,14 @@  &pcie_clkreqn_cpm {
 
 &pinctrl {
 	pinctrl-names = "default";
-	pinctrl-0 = <&q7_thermal_pin>;
+	pinctrl-0 = <&q7_thermal_pin &bios_disable_override_hog_pin>;
 
 	gpios {
+		bios_disable_override_hog_pin: bios-disable-override-hog-pin {
+			rockchip,pins =
+				<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
 		q7_thermal_pin: q7-thermal-pin {
 			rockchip,pins =
 				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;