[v6,4/9] arm64: dts: rockchip: add NanoPC-T6 LTS

Commit Message

Marcin Juszkiewicz Aug. 29, 2024, 12:26 p.m. UTC

In the LTS (2310) version the miniPCIe slot got removed and USB 2.0
setup has changed. There are two external accessible ports and two ports
on the internal header.

There is an on-board USB hub which provides:
- one external connector (bottom one)
- two internal ports on pin header
- one port for m.2 E connector

The top USB 2.0 connector comes directly from the SoC.

Signed-off-by: Marcin Juszkiewicz <[e-mail]>
---
 arch/arm64/boot/dts/rockchip/Makefile              |  1 +
 .../boot/dts/rockchip/rk3588-nanopc-t6-lts.dts     | 61 ++++++++++++++++++++++
 2 files changed, 62 insertions(+)

Patch

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index fda1b980eb4b..0f982c741243 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -128,6 +128,7 @@  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-friendlyelec-cm3588-nas.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6-lts.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6-lts.dts b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6-lts.dts
new file mode 100644
index 000000000000..fc465957a00b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6-lts.dts
@@ -0,0 +1,61 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2023 Thomas McKahan
+ * Copyright (c) 2024 Linaro Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "rk3588-nanopc-t6.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPC-T6 LTS";
+	compatible = "friendlyarm,nanopc-t6-lts", "rockchip,rk3588";
+
+	/* provide power for on-board USB 2.0 hub */
+	vcc5v0_usb20_host: vcc5v0-usb20-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb20_host_pwren>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "vcc5v0_usb20_host";
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&pinctrl {
+	usb {
+		usb20_host_pwren: usb20-host-pwren {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_usb20_host>;
+	status = "okay";
+};
+
+&usbdp_phy1 {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	dr_mode = "host";
+	status = "okay";
+};