| Message ID | 20240926103223.29538-1-frawang.cn@gmail.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [v3,1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576 | expand |
On 26/09/2024 12:32, Frank Wang wrote: > + - if: > + properties: > + compatible: > + contains: > + enum: > + - rockchip,rk3576-usb2phy > + then: > + properties: > + clocks: > + minItems: 3 > + maxItems: 3 Read one more time the example I gave you. Top-level constraints are saying max one clock. Best regards, Krzysztof
Hi Krzysztof, On 2024/9/26 22:19, Krzysztof Kozlowski wrote: > On 26/09/2024 12:32, Frank Wang wrote: >> + - if: >> + properties: >> + compatible: >> + contains: >> + enum: >> + - rockchip,rk3576-usb2phy >> + then: >> + properties: >> + clocks: >> + minItems: 3 >> + maxItems: 3 > Read one more time the example I gave you. Top-level constraints are > saying max one clock. > > Best regards, > Krzysztof > Sorry for overlooking this, I will set both "clocks" and "clock-names" to true, and add the else case below the above codes for the "old" SoCs. Just like the below. - clocks: - maxItems: 1 + clocks: true - clock-names: - const: phyclk + clock-names: true assigned-clocks: description: @@ -189,6 +187,13 @@ allOf: - const: phyclk - const: aclk - const: aclk_slv + else: + properties: + clocks: + maxItems: 1 + clock-names: + const: phyclk + Best regards, Frank
On 27/09/2024 09:01, Frank Wang wrote: > Hi Krzysztof, > > On 2024/9/26 22:19, Krzysztof Kozlowski wrote: >> On 26/09/2024 12:32, Frank Wang wrote: >>> + - if: >>> + properties: >>> + compatible: >>> + contains: >>> + enum: >>> + - rockchip,rk3576-usb2phy >>> + then: >>> + properties: >>> + clocks: >>> + minItems: 3 >>> + maxItems: 3 >> Read one more time the example I gave you. Top-level constraints are >> saying max one clock. >> >> Best regards, >> Krzysztof >> > > Sorry for overlooking this, I will set both "clocks" and "clock-names" > to true, and add the else case below the above codes for the "old" SoCs. > Just like the below. > > - clocks: > - maxItems: 1 > + clocks: true > > - clock-names: > - const: phyclk > + clock-names: true For the third time, read the code I gave you. Do you see something like this there? Why doing all the time something different than existing code? Best regards, Krzysztof
Hi Krzysztof, On 2024/9/27 15:30, Krzysztof Kozlowski wrote: > On 27/09/2024 09:01, Frank Wang wrote: >> Hi Krzysztof, >> >> On 2024/9/26 22:19, Krzysztof Kozlowski wrote: >>> On 26/09/2024 12:32, Frank Wang wrote: >>>> + - if: >>>> + properties: >>>> + compatible: >>>> + contains: >>>> + enum: >>>> + - rockchip,rk3576-usb2phy >>>> + then: >>>> + properties: >>>> + clocks: >>>> + minItems: 3 >>>> + maxItems: 3 >>> Read one more time the example I gave you. Top-level constraints are >>> saying max one clock. >>> >>> Best regards, >>> Krzysztof >>> >> Sorry for overlooking this, I will set both "clocks" and "clock-names" >> to true, and add the else case below the above codes for the "old" SoCs. >> Just like the below. >> >> - clocks: >> - maxItems: 1 >> + clocks: true >> >> - clock-names: >> - const: phyclk >> + clock-names: true > For the third time, read the code I gave you. Do you see something like > this there? Why doing all the time something different than existing code? Refer to the link you sent me that I must add minItems property for clocks, just like the below codes: @@ -35,7 +35,8 @@ properties: const: 0 clocks: - maxItems: 1 + minItems: 1 + maxItems: 3 That can pass dt_binding and dtb checking, however, "clocks" is the optional property for some old Rockchip PHYs, I am not sure is it right to force set minItems as 1 . If just keep maxItems, the dt_binding checking is failure. Best regards, Frank > Best regards, > Krzysztof >
Hi Krzysztof, Am Freitag, 27. September 2024, 09:30:30 CEST schrieb Krzysztof Kozlowski: > On 27/09/2024 09:01, Frank Wang wrote: > > Hi Krzysztof, > > > > On 2024/9/26 22:19, Krzysztof Kozlowski wrote: > >> On 26/09/2024 12:32, Frank Wang wrote: > >>> + - if: > >>> + properties: > >>> + compatible: > >>> + contains: > >>> + enum: > >>> + - rockchip,rk3576-usb2phy > >>> + then: > >>> + properties: > >>> + clocks: > >>> + minItems: 3 > >>> + maxItems: 3 > >> Read one more time the example I gave you. Top-level constraints are > >> saying max one clock. > >> > >> Best regards, > >> Krzysztof > >> > > > > Sorry for overlooking this, I will set both "clocks" and "clock-names" > > to true, and add the else case below the above codes for the "old" SoCs. > > Just like the below. > > > > - clocks: > > - maxItems: 1 > > + clocks: true > > > > - clock-names: > > - const: phyclk > > + clock-names: true > > For the third time, read the code I gave you. Do you see something like > this there? Why doing all the time something different than existing code? On vacation right now so late to the party, and somewhat confused :-) . I've tried to find the code you mentioned, but did fail. In [0] you mention "maybe oneOf". The other replies in that version were about the ordering needing to stay for the older phy variants. [1] in v2 has that NAK thing and [2] from v3 references that example again I am probably just blind, but could use a pointer. Because I think going with a - if: properties: compatible: contains: enum: - rockchip,rk3576-usb2phy then: properties: clocks: minItems: 3 maxItems: 3 clock-names: items: - const: phyclk - const: aclk - const: aclk_slv else: properties: clocks: maxItems: 1 clock-names: const: phyclk block should actually make sure each variant will check for the appropriate number of clocks? And having clocks:true in the main part then makes sure that the property is not getting marked as: arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dtb: usb2-phy@0: 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/phy/rockchip,inno-usb2phy.yaml# Heiko [0] https://lore.kernel.org/lkml/snccizbw6thn3lhwad4xppp7vqii4p56ttl2gufwc3ke7vfckf@e4b7nvwwtdfr/ [1] https://lore.kernel.org/lkml/2a4200ac-3ea2-4449-94ac-c4b9f37ad800@kernel.org/#t [2] https://lore.kernel.org/lkml/ed829240-d4f7-471f-84f6-3509f87f11a1@kernel.org/
On 27/09/2024 09:59, Frank Wang wrote: >>> >>> - clocks: >>> - maxItems: 1 >>> + clocks: true >>> >>> - clock-names: >>> - const: phyclk >>> + clock-names: true >> For the third time, read the code I gave you. Do you see something like >> this there? Why doing all the time something different than existing code? > > Refer to the link you sent me that I must add minItems property for > clocks, just like the below codes: > > @@ -35,7 +35,8 @@ properties: > const: 0 > > clocks: > - maxItems: 1 > + minItems: 1 > + maxItems: 3 Yes, for all variable properties, so also names. > > That can pass dt_binding and dtb checking, however, "clocks" is the > optional property for some old Rockchip PHYs, I am not sure is it right > to force set minItems as 1 . > If just keep maxItems, the dt_binding checking is failure. Please specify the question you want to ask. Best regards, Krzysztof
On 27/09/2024 10:02, Heiko Stuebner wrote: > Hi Krzysztof, > > Am Freitag, 27. September 2024, 09:30:30 CEST schrieb Krzysztof Kozlowski: >> On 27/09/2024 09:01, Frank Wang wrote: >>> Hi Krzysztof, >>> >>> On 2024/9/26 22:19, Krzysztof Kozlowski wrote: >>>> On 26/09/2024 12:32, Frank Wang wrote: >>>>> + - if: >>>>> + properties: >>>>> + compatible: >>>>> + contains: >>>>> + enum: >>>>> + - rockchip,rk3576-usb2phy >>>>> + then: >>>>> + properties: >>>>> + clocks: >>>>> + minItems: 3 >>>>> + maxItems: 3 >>>> Read one more time the example I gave you. Top-level constraints are >>>> saying max one clock. >>>> >>>> Best regards, >>>> Krzysztof >>>> >>> >>> Sorry for overlooking this, I will set both "clocks" and "clock-names" >>> to true, and add the else case below the above codes for the "old" SoCs. >>> Just like the below. >>> >>> - clocks: >>> - maxItems: 1 >>> + clocks: true >>> >>> - clock-names: >>> - const: phyclk >>> + clock-names: true >> >> For the third time, read the code I gave you. Do you see something like >> this there? Why doing all the time something different than existing code? > > On vacation right now so late to the party, and somewhat confused :-) . > > I've tried to find the code you mentioned, but did fail. > In [0] you mention "maybe oneOf". The other replies in that version were > about the ordering needing to stay for the older phy variants. > > [1] in v2 has that NAK thing and [2] from v3 references that example again > > I am probably just blind, but could use a pointer. Oh, maybe I did not provide the link? I apologize. I thought I gave reference to standard example. My bad. Here it goes: https://elixir.bootlin.com/linux/v6.11-rc6/source/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml#L127 Best regards, Krzysztof
Hi Krzysztof, On 2024/9/27 17:52, Krzysztof Kozlowski wrote: > On 27/09/2024 09:59, Frank Wang wrote: >>>> - clocks: >>>> - maxItems: 1 >>>> + clocks: true >>>> >>>> - clock-names: >>>> - const: phyclk >>>> + clock-names: true >>> For the third time, read the code I gave you. Do you see something like >>> this there? Why doing all the time something different than existing code? >> Refer to the link you sent me that I must add minItems property for >> clocks, just like the below codes: >> >> @@ -35,7 +35,8 @@ properties: >> const: 0 >> >> clocks: >> - maxItems: 1 >> + minItems: 1 >> + maxItems: 3 > Yes, for all variable properties, so also names. > >> That can pass dt_binding and dtb checking, however, "clocks" is the >> optional property for some old Rockchip PHYs, I am not sure is it right >> to force set minItems as 1 . >> If just keep maxItems, the dt_binding checking is failure. > Please specify the question you want to ask. > Q1: The "clocks" is an optional property for some old Rockchip PHYs, so set "minItems: 1" likes the below, is this a suitable setting? clocks: - maxItems: 1 + minItems: 1 + maxItems: 3Q2: Do you want me to amend the code to like this? clocks: minItems: 1 maxItems: 3 clock-names: minItems: 1 maxItems: 3 allOf: [...] - if: properties: compatible: contains: enum: - rockchip,px30-usb2phy - rockchip,rk3128-usb2phy - rockchip,rk3228-usb2phy - rockchip,rk3308-usb2phy - rockchip,rk3328-usb2phy - rockchip,rk3366-usb2phy - rockchip,rk3399-usb2phy - rockchip,rk3568-usb2phy - rockchip,rk3588-usb2phy - rockchip,rv1108-usb2phy then: properties: clocks: maxItems: 1 clock-names: const: phyclk - if: properties: compatible: contains: enum: - rockchip,rk3576-usb2phy then: properties: clocks: minItems: 3 maxItems: 3 clock-names: items: - const: phyclk - const: aclk - const: aclk_slv Best regards, Frank > Best regards, > Krzysztof >
Hi Krzysztof, On 2024/9/27 17:52, Krzysztof Kozlowski wrote: > On 27/09/2024 09:59, Frank Wang wrote: >>>> - clocks: >>>> - maxItems: 1 >>>> + clocks: true >>>> >>>> - clock-names: >>>> - const: phyclk >>>> + clock-names: true >>> For the third time, read the code I gave you. Do you see something like >>> this there? Why doing all the time something different than existing code? >> Refer to the link you sent me that I must add minItems property for >> clocks, just like the below codes: >> >> @@ -35,7 +35,8 @@ properties: >> const: 0 >> >> clocks: >> - maxItems: 1 >> + minItems: 1 >> + maxItems: 3 > Yes, for all variable properties, so also names. > >> That can pass dt_binding and dtb checking, however, "clocks" is the >> optional property for some old Rockchip PHYs, I am not sure is it right >> to force set minItems as 1 . >> If just keep maxItems, the dt_binding checking is failure. > Please specify the question you want to ask. > Please ignore my last garbled email as mailbox client issue. Q1: The "clocks" is an optional property for some old Rockchip PHYs, so set "minItems: 1" likes the below, is this a suitable setting? clocks: - maxItems: 1 + minItems: 1 + maxItems: 3 Q2: Do you want me to amend the code to like this? clocks: minItems: 1 maxItems: 3 clock-names: minItems: 1 maxItems: 3 allOf: [...] - if: properties: compatible: contains: enum: - rockchip,px30-usb2phy - rockchip,rk3128-usb2phy - rockchip,rk3228-usb2phy - rockchip,rk3308-usb2phy - rockchip,rk3328-usb2phy - rockchip,rk3366-usb2phy - rockchip,rk3399-usb2phy - rockchip,rk3568-usb2phy - rockchip,rk3588-usb2phy - rockchip,rv1108-usb2phy then: properties: clocks: maxItems: 1 clock-names: const: phyclk - if: properties: compatible: contains: enum: - rockchip,rk3576-usb2phy then: properties: clocks: minItems: 3 maxItems: 3 clock-names: items: - const: phyclk - const: aclk - const: aclk_slv BR. Frank > Best regards, > Krzysztof >
On 27/09/2024 12:59, Frank Wang wrote: > Hi Krzysztof, > > On 2024/9/27 17:52, Krzysztof Kozlowski wrote: >> On 27/09/2024 09:59, Frank Wang wrote: >>>>> - clocks: >>>>> - maxItems: 1 >>>>> + clocks: true >>>>> >>>>> - clock-names: >>>>> - const: phyclk >>>>> + clock-names: true >>>> For the third time, read the code I gave you. Do you see something like >>>> this there? Why doing all the time something different than existing code? >>> Refer to the link you sent me that I must add minItems property for >>> clocks, just like the below codes: >>> >>> @@ -35,7 +35,8 @@ properties: >>> const: 0 >>> >>> clocks: >>> - maxItems: 1 >>> + minItems: 1 >>> + maxItems: 3 >> Yes, for all variable properties, so also names. >> >>> That can pass dt_binding and dtb checking, however, "clocks" is the >>> optional property for some old Rockchip PHYs, I am not sure is it right >>> to force set minItems as 1 . >>> If just keep maxItems, the dt_binding checking is failure. >> Please specify the question you want to ask. >> > > Please ignore my last garbled email as mailbox client issue. > > Q1: The "clocks" is an optional property for some old Rockchip PHYs, so > set "minItems: 1" likes the below, is this a suitable setting? > > clocks: > - maxItems: 1 > + minItems: 1 > + maxItems: 3 > > Q2: Do you want me to amend the code to like this? > > clocks: > minItems: 1 > maxItems: 3 > > clock-names: > minItems: 1 > maxItems: 3 List should be here with minItems. Then you only define the constraints in if:then: Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml index 5254413137c6..d286753bd53f 100644 --- a/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml +++ b/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml @@ -20,6 +20,7 @@ properties: - rockchip,rk3366-usb2phy - rockchip,rk3399-usb2phy - rockchip,rk3568-usb2phy + - rockchip,rk3576-usb2phy - rockchip,rk3588-usb2phy - rockchip,rv1108-usb2phy @@ -143,6 +144,7 @@ allOf: contains: enum: - rockchip,rk3568-usb2phy + - rockchip,rk3576-usb2phy - rockchip,rk3588-usb2phy then: @@ -171,6 +173,22 @@ allOf: required: - interrupts - interrupt-names + - if: + properties: + compatible: + contains: + enum: + - rockchip,rk3576-usb2phy + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: phyclk + - const: aclk + - const: aclk_slv additionalProperties: false