| Message ID | 20241007105657.6203-4-didi.debian@cknow.org (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [1/4] arm64: dts: rockchip: Add PD to csi dphy node on rk356x | expand |
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index b5cbe7cab10b..0597de415fe0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -754,8 +754,7 @@ hdmi: hdmi@ff3c0000 { compatible = "rockchip,rk3328-dw-hdmi"; reg = <0x0 0xff3c0000 0x0 0x20000>; reg-io-width = <4>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_HDMI>, <&cru SCLK_HDMI_SFC>, <&cru SCLK_RTC32K>;
The "synopsys,dw-hdmi.yaml" binding specifies that the interrupts property of the hdmi node has 'maxItems: 1', so the hdmi node in rk3328.dtsi having 2 is incorrect. Paragraph 1.3 ("System Interrupt connection") of the RK3328 TRM v1.1 page 16 and 17 define the following hdmi related interrupts: - 67 hdmi_intr - 103 hdmi_intr_wakeup The difference of 32 is due to a different base used in the TRM. The RK3399 (which uses the same binding) has '23: hdmi_irq' and '24: hdmi_wakeup_irq' according to its TRM (page 19). The RK3568 (also same binding) has '76: hdmi_wakeup' and '77: hdmi' according to page 17 of its TRM. In both cases the non-wakeup IRQ was used, so use that too for rk3328. Helped-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Diederik de Haas <didi.debian@cknow.org> --- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)