@@ -127,6 +127,21 @@ vcc5v0_host: vcc5v0-host-regulator {
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_sys>;
};
+
+ vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ /* USB_OTG_PWREN */
+ gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_otg_pwren>;
+ regulator-name = "vcc5v0_usb30_otg";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
};
&combphy2_psu {
@@ -251,6 +266,10 @@ usb {
usb_host_pwren: usb-host-pwren {
rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
+
+ usb_otg_pwren: usb-otg-pwren {
+ rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
};
@@ -636,6 +655,15 @@ &tsadc {
status = "okay";
};
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ phy-supply = <&vcc5v0_usb30_otg>;
+ status = "okay";
+};
+
&u2phy1 {
status = "okay";
};
@@ -668,6 +696,10 @@ &uart2 {
status = "okay";
};
+&usbdp_phy0 {
+ status = "okay";
+};
+
&usbdp_phy1 {
status = "okay";
};
@@ -680,6 +712,11 @@ &usb_host0_ohci {
status = "okay";
};
+&usb_host0_xhci {
+ dr_mode = "host";
+ status = "okay";
+};
+
&usb_host1_ehci {
status = "okay";
};
Enable full support (XHCI) for the upper USB3 port from Orange Pi 5 Max. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> --- .../dts/rockchip/rk3588-orangepi-5-max.dts | 37 +++++++++++++++++++ 1 file changed, 37 insertions(+)