[v6,1/5] arm64: dts: rockchip: Differences in Orange Pi 5 Max

Commit Message

Jimmy Hon Feb. 22, 2025, 5:27 p.m. UTC

...than the Orange Pi 5 Ultra

The Orange Pi 5 Plus and Orange Pi 5 Max have 2SK3018s attached to the
PWM LEDs. The Orange Pi 5 Ultra does not, and thus needs the PWM
polarity inverted.

Also remove the model/compatible from the dtsi. It should be at the
board level only.

Fixes: c600d252dc52 ("arm64: dts: rockchip: Add Orange Pi 5 Max board")
Signed-off-by: Jimmy Hon <[e-mail]>
---
 .../boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi     | 9 ---------
 arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts   | 8 ++++++++
 2 files changed, 8 insertions(+), 9 deletions(-)

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi
index 87090cb98020..6e4dcd8fff26 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi
@@ -7,9 +7,6 @@ 
 #include "rk3588-orangepi-5.dtsi"
 
 / {
-	model = "Xunlong Orange Pi 5 Max";
-	compatible = "xunlong,orangepi-5-max", "rockchip,rk3588";
-
 	vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -62,15 +59,9 @@  &hym8563 {
 
 &led_blue_pwm {
 	/* PWM_LED1 */
-	pwms = <&pwm4 0 25000 0>;
 	status = "okay";
 };
 
-&led_green_pwm {
-	/* PWM_LED2 */
-	pwms = <&pwm5 0 25000 0>;
-};
-
 /* phy2 */
 &pcie2x1l1 {
 	reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts
index 26421ca7843b..be8cc96b5308 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts
@@ -77,6 +77,14 @@  &hdptxphy1 {
 	status = "okay";
 };
 
+&led_blue_pwm {
+	pwms = <&pwm4 0 25000 0>;
+};
+
+&led_green_pwm {
+	pwms = <&pwm5 0 25000 0>;
+};
+
 &pinctrl {
 
 	usb {