@@ -449,21 +449,6 @@ static const struct regmap_irq_chip rk818_irq_chip = {
static struct i2c_client *rk808_i2c_client;
-static void rk805_device_shutdown(void)
-{
- int ret;
- struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
-
- if (!rk808)
- return;
-
- ret = regmap_update_bits(rk808->regmap,
- RK805_DEV_CTRL_REG,
- DEV_OFF, DEV_OFF);
- if (ret)
- dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n");
-}
-
static void rk805_device_shutdown_prepare(void)
{
int ret;
@@ -482,29 +467,29 @@ static void rk805_device_shutdown_prepare(void)
static void rk808_device_shutdown(void)
{
int ret;
+ unsigned int reg, bit;
struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
if (!rk808)
return;
- ret = regmap_update_bits(rk808->regmap,
- RK808_DEVCTRL_REG,
- DEV_OFF_RST, DEV_OFF_RST);
- if (ret)
- dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n");
-}
-
-static void rk818_device_shutdown(void)
-{
- int ret;
- struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
-
- if (!rk808)
+ switch (rk808->variant) {
+ case RK805_ID:
+ reg = RK805_DEV_CTRL_REG;
+ bit = DEV_OFF;
+ break;
+ case RK808_ID:
+ reg = RK808_DEVCTRL_REG,
+ bit = DEV_OFF_RST;
+ break;
+ case RK818_ID:
+ reg = RK818_DEVCTRL_REG;
+ bit = DEV_OFF;
+ break;
+ default:
return;
-
- ret = regmap_update_bits(rk808->regmap,
- RK818_DEVCTRL_REG,
- DEV_OFF, DEV_OFF);
+ }
+ ret = regmap_update_bits(rk808->regmap, reg, bit, bit);
if (ret)
dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n");
}
@@ -594,7 +579,6 @@ static int rk808_probe(struct i2c_client *client,
nr_pre_init_regs = ARRAY_SIZE(rk805_pre_init_reg);
cells = rk805s;
nr_cells = ARRAY_SIZE(rk805s);
- rk808->pm_pwroff_fn = rk805_device_shutdown;
rk808->pm_pwroff_prep_fn = rk805_device_shutdown_prepare;
break;
case RK808_ID:
@@ -604,7 +588,6 @@ static int rk808_probe(struct i2c_client *client,
nr_pre_init_regs = ARRAY_SIZE(rk808_pre_init_reg);
cells = rk808s;
nr_cells = ARRAY_SIZE(rk808s);
- rk808->pm_pwroff_fn = rk808_device_shutdown;
break;
case RK818_ID:
rk808->regmap_cfg = &rk818_regmap_config;
@@ -613,7 +596,6 @@ static int rk808_probe(struct i2c_client *client,
nr_pre_init_regs = ARRAY_SIZE(rk818_pre_init_reg);
cells = rk818s;
nr_cells = ARRAY_SIZE(rk818s);
- rk808->pm_pwroff_fn = rk818_device_shutdown;
break;
case RK809_ID:
case RK817_ID:
@@ -677,7 +659,7 @@ static int rk808_probe(struct i2c_client *client,
}
if (of_property_read_bool(np, "rockchip,system-power-controller")) {
- pm_power_off = rk808->pm_pwroff_fn;
+ pm_power_off = rk808_device_shutdown;
pm_power_off_prepare = rk808->pm_pwroff_prep_fn;
}
@@ -701,7 +683,7 @@ static int rk808_remove(struct i2c_client *client)
* pm_power_off may points to a function from another module.
* Check if the pointer is set by us and only then overwrite it.
*/
- if (rk808->pm_pwroff_fn && pm_power_off == rk808->pm_pwroff_fn)
+ if (pm_power_off == rk808_device_shutdown)
pm_power_off = NULL;
/**
@@ -620,7 +620,6 @@ struct rk808 {
long variant;
const struct regmap_config *regmap_cfg;
const struct regmap_irq_chip *regmap_irq_chip;
- void (*pm_pwroff_fn)(void);
void (*pm_pwroff_prep_fn)(void);
};
#endif /* __LINUX_REGULATOR_RK808_H */
Rather than having 3 almost-identical functions plus the machinery to keep track of them, it's far simpler to just dynamically select the appropriate register field per variant. Signed-off-by: Robin Murphy <robin.murphy@arm.com> --- drivers/mfd/rk808.c | 56 +++++++++++++-------------------------- include/linux/mfd/rk808.h | 1 - 2 files changed, 19 insertions(+), 38 deletions(-)