[v2,04/12] clk: rockchip: rk3036: enable the CLK_IGNORE_UNUSED flag for sclk_i2s_out

Commit Message

Caesar Wang Jan. 13, 2016, 8:10 a.m. UTC

Heiko,

? 2016?01?08? 17:46, Heiko Stuebner ??:
> Hi Caesar,
>
> Am Freitag, 8. Januar 2016, 17:26:18 schrieb Caesar Wang:
>> ? 2016?01?07? 18:05, Heiko Stuebner ??:
>>> Am Donnerstag, 7. Januar 2016, 16:25:47 schrieb Caesar Wang:
>>>> SCLk_I2S_OUT is the noc bus clock for i2s module, this clock is used by
>>>> extra codecs.
>>>>
>>>> Due to it shouldn't belong to any driver, but we need it enabled,
>>>> so just mark it as the CLK_IGNORE_UNUSED flag.
>>> What makes you think it shouldn't belong to any driver?
>>>
>>> In most schematics I have, i2s_clkout is going to some clock-input of
>>> the
>>> audio codec - probably the MCLK input on your rt5616. And while the new
>>> rt5616 driver does not seem to do clock handling, it should just handle
>>> the clock using the normal APIs.
>> You are right,  that's seem has to find the root cause.
>> I'm wonder that the codec/i2s is working in kernel v4.1 patch without it.
>>
>> In general,  the MLCK will be handled in i2s driver if the cpu side is
>> master.
> looking at the rt5616 datasheet, that would be BCLK1 instead I think. This
> one does differentiate between being master/slave.
>
> The master/sysclk (mclk) is also handled in other drivers in all cases.
> (da7213.c, da7219.c, max98090.c, max98095.c, probably more)

Saw the patch:
https://patchwork.kernel.org/patch/5427131/

Add the follow that's working.


>
>
> Heiko
>
> _______________________________________________
> Linux-rockchip mailing list
> [e-mail]
> http://lists.infradead.org/mailman/listinfo/linux-rockchip

Patch

--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -288,8 +288,8 @@ 
                 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
                 #address-cells = <1>;
                 #size-cells = <0>;
-               clock-names = "i2s_clk", "i2s_hclk";
-               clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>;
+               clock-names = "i2s_clk", "i2s_hclk", "i2s_clk_out";
+               clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>, <&cru 
SCLK_I2S_OUT>;

Okay, I believe Mark likes that works in codec driver.