| Message ID | 9037b7edbbb41cbbf699ebe3a511daf22d886e7d.1570444695.git.robin.murphy@arm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: rockchip: Add Beelink A1 | expand |
On Mon, Oct 7, 2019 at 6:33 AM Robin Murphy <robin.murphy@arm.com> wrote: > > Beelink A1 is a TV box implementing the higher-end options of the > RK3328 reference design - the DTB from the stock Android firmware is > clearly the "rk3328-box-plus" variant from the Rockchip 3.10 BSP with > minor modifications to accommodate the USB WiFi module and additional > VFD-style LED driver. It features: > > - 4GB of 32-bit LPDDR3 > - 16GB of HS200 eMMC (newer models with 32GB also exist) > - Realtek RTL8211F phy for gigabit ethernet > - Fn-Link 6221E-UUC module (RealTek RTL8821CU) for 11ac WiFi and Bluetooth 4.2 > - HDMI and analog A/V > - 1x USB 3.0 type A host, 1x USB 2.0 type A OTG, 1x micro SD > - IR receiver and a neat little LED clock display. > > Signed-off-by: Robin Murphy <robin.murphy@arm.com> > --- > > One question I'm wondering about is whether it's worth pushing the HDMI > and analog codec audio cards down into rk3328.dtsi (as with HDMI audio > on RK3399), since those audio pipelines are internal to the SoC and the > board only really governs whether the outputs are wired up or not. Seems reasonable. One other candidate below. > > .../devicetree/bindings/arm/rockchip.yaml | 5 + In the future, please split bindings to a separate patch. > arch/arm64/boot/dts/rockchip/Makefile | 1 + > arch/arm64/boot/dts/rockchip/rk3328-a1.dts | 399 ++++++++++++++++++ > 3 files changed, 405 insertions(+) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-a1.dts > > diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml > index c82c5e57d44c..f27f7805f57e 100644 > --- a/Documentation/devicetree/bindings/arm/rockchip.yaml > +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml > @@ -40,6 +40,11 @@ properties: > - const: asus,rk3288-tinker-s > - const: rockchip,rk3288 > > + - description: Beelink A1 > + items: > + - const: azw,beelink-a1 > + - const: rockchip,rk3328 > + > - description: bq Curie 2 tablet > items: > - const: mundoreader,bq-curie2 > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile > index 1f18a9392d15..a6f250e7cde2 100644 > --- a/arch/arm64/boot/dts/rockchip/Makefile > +++ b/arch/arm64/boot/dts/rockchip/Makefile > @@ -1,5 +1,6 @@ > # SPDX-License-Identifier: GPL-2.0 > dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb > diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts > new file mode 100644 > index 000000000000..03ad663ff821 > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts > @@ -0,0 +1,399 @@ > +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) > +// Copyright (c) 2017-2019 Arm Ltd. > + > +/dts-v1/; > +#include "rk3328.dtsi" > + > +/ { > + model = "Beelink A1"; > + compatible = "azw,beelink-a1", "rockchip,rk3328"; > + > + /* > + * UART pins, as viewed with bottom of case removed: > + * > + * Front > + * /------- > + * L / o <- Gnd > + * e / o <-- Rx > + * f / o <--- Tx > + * t / o <---- +3.3v > + * | > + */ > + chosen { > + stdout-path = "serial2:1500000n8"; > + }; > + > + gmac_clkin: external-gmac-clock { > + compatible = "fixed-clock"; > + clock-frequency = <125000000>; > + clock-output-names = "gmac_clkin"; > + #clock-cells = <0>; > + }; > + > + vcc_host_5v: usb3-current-switch { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&usb30_host_drv>; > + regulator-name = "vcc_host_5v"; > + vin-supply = <&vcc_sys>; > + }; > + > + vcc_sys: vcc-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_sys"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > + > + cpus { > + idle-states { > + entry-method = "arm,psci"; > + > + cpu_sleep: cpu-sleep { > + compatible = "arm,idle-state"; > + arm,psci-suspend-param = <0x0010000>; > + local-timer-stop; > + entry-latency-us = <120>; > + exit-latency-us = <250>; > + min-residency-us = <900>; This doesn't seem like something that's board specific, but I guess the regulator could have some influence on these times. If so, the board file could always override a default. Rob
On 07/10/2019 13:53, Rob Herring wrote: > On Mon, Oct 7, 2019 at 6:33 AM Robin Murphy <robin.murphy@arm.com> wrote: >> >> Beelink A1 is a TV box implementing the higher-end options of the >> RK3328 reference design - the DTB from the stock Android firmware is >> clearly the "rk3328-box-plus" variant from the Rockchip 3.10 BSP with >> minor modifications to accommodate the USB WiFi module and additional >> VFD-style LED driver. It features: >> >> - 4GB of 32-bit LPDDR3 >> - 16GB of HS200 eMMC (newer models with 32GB also exist) >> - Realtek RTL8211F phy for gigabit ethernet >> - Fn-Link 6221E-UUC module (RealTek RTL8821CU) for 11ac WiFi and Bluetooth 4.2 >> - HDMI and analog A/V >> - 1x USB 3.0 type A host, 1x USB 2.0 type A OTG, 1x micro SD >> - IR receiver and a neat little LED clock display. >> >> Signed-off-by: Robin Murphy <robin.murphy@arm.com> >> --- >> >> One question I'm wondering about is whether it's worth pushing the HDMI >> and analog codec audio cards down into rk3328.dtsi (as with HDMI audio >> on RK3399), since those audio pipelines are internal to the SoC and the >> board only really governs whether the outputs are wired up or not. > > Seems reasonable. One other candidate below. > >> >> .../devicetree/bindings/arm/rockchip.yaml | 5 + > > In the future, please split bindings to a separate patch. Ha, busted! I thought this might be trivial enough to slip through, but I'll split it out if you prefer. >> arch/arm64/boot/dts/rockchip/Makefile | 1 + >> arch/arm64/boot/dts/rockchip/rk3328-a1.dts | 399 ++++++++++++++++++ >> 3 files changed, 405 insertions(+) >> create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-a1.dts >> >> diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml >> index c82c5e57d44c..f27f7805f57e 100644 >> --- a/Documentation/devicetree/bindings/arm/rockchip.yaml >> +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml >> @@ -40,6 +40,11 @@ properties: >> - const: asus,rk3288-tinker-s >> - const: rockchip,rk3288 >> >> + - description: Beelink A1 >> + items: >> + - const: azw,beelink-a1 >> + - const: rockchip,rk3328 >> + >> - description: bq Curie 2 tablet >> items: >> - const: mundoreader,bq-curie2 >> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile >> index 1f18a9392d15..a6f250e7cde2 100644 >> --- a/arch/arm64/boot/dts/rockchip/Makefile >> +++ b/arch/arm64/boot/dts/rockchip/Makefile >> @@ -1,5 +1,6 @@ >> # SPDX-License-Identifier: GPL-2.0 >> dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb >> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb >> diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts >> new file mode 100644 >> index 000000000000..03ad663ff821 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts >> @@ -0,0 +1,399 @@ >> +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) >> +// Copyright (c) 2017-2019 Arm Ltd. >> + >> +/dts-v1/; >> +#include "rk3328.dtsi" >> + >> +/ { >> + model = "Beelink A1"; >> + compatible = "azw,beelink-a1", "rockchip,rk3328"; >> + >> + /* >> + * UART pins, as viewed with bottom of case removed: >> + * >> + * Front >> + * /------- >> + * L / o <- Gnd >> + * e / o <-- Rx >> + * f / o <--- Tx >> + * t / o <---- +3.3v >> + * | >> + */ >> + chosen { >> + stdout-path = "serial2:1500000n8"; >> + }; >> + >> + gmac_clkin: external-gmac-clock { >> + compatible = "fixed-clock"; >> + clock-frequency = <125000000>; >> + clock-output-names = "gmac_clkin"; >> + #clock-cells = <0>; >> + }; >> + >> + vcc_host_5v: usb3-current-switch { >> + compatible = "regulator-fixed"; >> + enable-active-high; >> + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&usb30_host_drv>; >> + regulator-name = "vcc_host_5v"; >> + vin-supply = <&vcc_sys>; >> + }; >> + >> + vcc_sys: vcc-sys { >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc_sys"; >> + regulator-min-microvolt = <5000000>; >> + regulator-max-microvolt = <5000000>; >> + }; >> + >> + cpus { >> + idle-states { >> + entry-method = "arm,psci"; >> + >> + cpu_sleep: cpu-sleep { >> + compatible = "arm,idle-state"; >> + arm,psci-suspend-param = <0x0010000>; >> + local-timer-stop; >> + entry-latency-us = <120>; >> + exit-latency-us = <250>; >> + min-residency-us = <900>; > > This doesn't seem like something that's board specific, but I guess > the regulator could have some influence on these times. If so, the > board file could always override a default. True, this is traceable back to the Rockchip Android BSP where it's actually applied to the entire SoC family[1]. I don't know if there's likely to be any difference between the downstream "RKTRUST" firmware binaries (which this nominally represents) and upstream ATF in terms of their PSCI implementation/performance. I've not got round to properly tinkering with suspend/resume and power management stuff yet, so I guess another option would be to just forget about this part for now - Heiko, any opinions? Cheers, Robin. [1] https://github.com/rockchip-linux/kernel/blob/release-3.10/arch/arm64/boot/dts/rk322xh.dtsi#L107-L118
Am Freitag, 11. Oktober 2019, 14:20:38 CEST schrieb Robin Murphy: > On 07/10/2019 13:53, Rob Herring wrote: > > On Mon, Oct 7, 2019 at 6:33 AM Robin Murphy <robin.murphy@arm.com> wrote: > >> > >> Beelink A1 is a TV box implementing the higher-end options of the > >> RK3328 reference design - the DTB from the stock Android firmware is > >> clearly the "rk3328-box-plus" variant from the Rockchip 3.10 BSP with > >> minor modifications to accommodate the USB WiFi module and additional > >> VFD-style LED driver. It features: > >> > >> - 4GB of 32-bit LPDDR3 > >> - 16GB of HS200 eMMC (newer models with 32GB also exist) > >> - Realtek RTL8211F phy for gigabit ethernet > >> - Fn-Link 6221E-UUC module (RealTek RTL8821CU) for 11ac WiFi and Bluetooth 4.2 > >> - HDMI and analog A/V > >> - 1x USB 3.0 type A host, 1x USB 2.0 type A OTG, 1x micro SD > >> - IR receiver and a neat little LED clock display. > >> > >> Signed-off-by: Robin Murphy <robin.murphy@arm.com> > >> --- > >> > >> One question I'm wondering about is whether it's worth pushing the HDMI > >> and analog codec audio cards down into rk3328.dtsi (as with HDMI audio > >> on RK3399), since those audio pipelines are internal to the SoC and the > >> board only really governs whether the outputs are wired up or not. > > > > Seems reasonable. One other candidate below. > > > >> > >> .../devicetree/bindings/arm/rockchip.yaml | 5 + > > > > In the future, please split bindings to a separate patch. > > Ha, busted! I thought this might be trivial enough to slip through, but > I'll split it out if you prefer. > > >> arch/arm64/boot/dts/rockchip/Makefile | 1 + > >> arch/arm64/boot/dts/rockchip/rk3328-a1.dts | 399 ++++++++++++++++++ > >> 3 files changed, 405 insertions(+) > >> create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-a1.dts > >> > >> diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml > >> index c82c5e57d44c..f27f7805f57e 100644 > >> --- a/Documentation/devicetree/bindings/arm/rockchip.yaml > >> +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml > >> @@ -40,6 +40,11 @@ properties: > >> - const: asus,rk3288-tinker-s > >> - const: rockchip,rk3288 > >> > >> + - description: Beelink A1 > >> + items: > >> + - const: azw,beelink-a1 > >> + - const: rockchip,rk3328 > >> + > >> - description: bq Curie 2 tablet > >> items: > >> - const: mundoreader,bq-curie2 > >> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile > >> index 1f18a9392d15..a6f250e7cde2 100644 > >> --- a/arch/arm64/boot/dts/rockchip/Makefile > >> +++ b/arch/arm64/boot/dts/rockchip/Makefile > >> @@ -1,5 +1,6 @@ > >> # SPDX-License-Identifier: GPL-2.0 > >> dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb > >> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb > >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb > >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb > >> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb > >> diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts > >> new file mode 100644 > >> index 000000000000..03ad663ff821 > >> --- /dev/null > >> +++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts > >> @@ -0,0 +1,399 @@ > >> +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) > >> +// Copyright (c) 2017-2019 Arm Ltd. > >> + > >> +/dts-v1/; > >> +#include "rk3328.dtsi" > >> + > >> +/ { > >> + model = "Beelink A1"; > >> + compatible = "azw,beelink-a1", "rockchip,rk3328"; > >> + > >> + /* > >> + * UART pins, as viewed with bottom of case removed: > >> + * > >> + * Front > >> + * /------- > >> + * L / o <- Gnd > >> + * e / o <-- Rx > >> + * f / o <--- Tx > >> + * t / o <---- +3.3v > >> + * | > >> + */ > >> + chosen { > >> + stdout-path = "serial2:1500000n8"; > >> + }; > >> + > >> + gmac_clkin: external-gmac-clock { > >> + compatible = "fixed-clock"; > >> + clock-frequency = <125000000>; > >> + clock-output-names = "gmac_clkin"; > >> + #clock-cells = <0>; > >> + }; > >> + > >> + vcc_host_5v: usb3-current-switch { > >> + compatible = "regulator-fixed"; > >> + enable-active-high; > >> + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; > >> + pinctrl-names = "default"; > >> + pinctrl-0 = <&usb30_host_drv>; > >> + regulator-name = "vcc_host_5v"; > >> + vin-supply = <&vcc_sys>; > >> + }; > >> + > >> + vcc_sys: vcc-sys { > >> + compatible = "regulator-fixed"; > >> + regulator-name = "vcc_sys"; > >> + regulator-min-microvolt = <5000000>; > >> + regulator-max-microvolt = <5000000>; > >> + }; > >> + > >> + cpus { > >> + idle-states { > >> + entry-method = "arm,psci"; > >> + > >> + cpu_sleep: cpu-sleep { > >> + compatible = "arm,idle-state"; > >> + arm,psci-suspend-param = <0x0010000>; > >> + local-timer-stop; > >> + entry-latency-us = <120>; > >> + exit-latency-us = <250>; > >> + min-residency-us = <900>; > > > > This doesn't seem like something that's board specific, but I guess > > the regulator could have some influence on these times. If so, the > > board file could always override a default. > > True, this is traceable back to the Rockchip Android BSP where it's > actually applied to the entire SoC family[1]. I don't know if there's > likely to be any difference between the downstream "RKTRUST" firmware > binaries (which this nominally represents) and upstream ATF in terms of > their PSCI implementation/performance. > > I've not got round to properly tinkering with suspend/resume and power > management stuff yet, so I guess another option would be to just forget > about this part for now - Heiko, any opinions? I think nobody actually knows what goes on in Rockchip's binary ATF variant, which is the reason I dislike it so much ;-) . What's in the upstream sources should always take precedent. Looking at rk3399 as an example where they had oversight from ChromeOS people there are idle-states in rk3399.dtsi and I guess there should be a counterpart int ATF. The idle-state values also match rk3399's cpu-sleep, so seem pretty standard. So should just go into rk3328.dtsi after someone could verify that this works with upstream ATF. Heiko
On 11/10/2019 15:19, wrote: > Am Freitag, 11. Oktober 2019, 14:20:38 CEST schrieb Robin Murphy: >> On 07/10/2019 13:53, Rob Herring wrote: >>> On Mon, Oct 7, 2019 at 6:33 AM Robin Murphy <robin.murphy@arm.com> wrote: >>>> >>>> Beelink A1 is a TV box implementing the higher-end options of the >>>> RK3328 reference design - the DTB from the stock Android firmware is >>>> clearly the "rk3328-box-plus" variant from the Rockchip 3.10 BSP with >>>> minor modifications to accommodate the USB WiFi module and additional >>>> VFD-style LED driver. It features: >>>> >>>> - 4GB of 32-bit LPDDR3 >>>> - 16GB of HS200 eMMC (newer models with 32GB also exist) >>>> - Realtek RTL8211F phy for gigabit ethernet >>>> - Fn-Link 6221E-UUC module (RealTek RTL8821CU) for 11ac WiFi and Bluetooth 4.2 >>>> - HDMI and analog A/V >>>> - 1x USB 3.0 type A host, 1x USB 2.0 type A OTG, 1x micro SD >>>> - IR receiver and a neat little LED clock display. >>>> >>>> Signed-off-by: Robin Murphy <robin.murphy@arm.com> >>>> --- >>>> >>>> One question I'm wondering about is whether it's worth pushing the HDMI >>>> and analog codec audio cards down into rk3328.dtsi (as with HDMI audio >>>> on RK3399), since those audio pipelines are internal to the SoC and the >>>> board only really governs whether the outputs are wired up or not. >>> >>> Seems reasonable. One other candidate below. >>> >>>> >>>> .../devicetree/bindings/arm/rockchip.yaml | 5 + >>> >>> In the future, please split bindings to a separate patch. >> >> Ha, busted! I thought this might be trivial enough to slip through, but >> I'll split it out if you prefer. >> >>>> arch/arm64/boot/dts/rockchip/Makefile | 1 + >>>> arch/arm64/boot/dts/rockchip/rk3328-a1.dts | 399 ++++++++++++++++++ >>>> 3 files changed, 405 insertions(+) >>>> create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-a1.dts >>>> >>>> diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml >>>> index c82c5e57d44c..f27f7805f57e 100644 >>>> --- a/Documentation/devicetree/bindings/arm/rockchip.yaml >>>> +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml >>>> @@ -40,6 +40,11 @@ properties: >>>> - const: asus,rk3288-tinker-s >>>> - const: rockchip,rk3288 >>>> >>>> + - description: Beelink A1 >>>> + items: >>>> + - const: azw,beelink-a1 >>>> + - const: rockchip,rk3328 >>>> + >>>> - description: bq Curie 2 tablet >>>> items: >>>> - const: mundoreader,bq-curie2 >>>> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile >>>> index 1f18a9392d15..a6f250e7cde2 100644 >>>> --- a/arch/arm64/boot/dts/rockchip/Makefile >>>> +++ b/arch/arm64/boot/dts/rockchip/Makefile >>>> @@ -1,5 +1,6 @@ >>>> # SPDX-License-Identifier: GPL-2.0 >>>> dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb >>>> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb >>>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb >>>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb >>>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb >>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts >>>> new file mode 100644 >>>> index 000000000000..03ad663ff821 >>>> --- /dev/null >>>> +++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts >>>> @@ -0,0 +1,399 @@ >>>> +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) >>>> +// Copyright (c) 2017-2019 Arm Ltd. >>>> + >>>> +/dts-v1/; >>>> +#include "rk3328.dtsi" >>>> + >>>> +/ { >>>> + model = "Beelink A1"; >>>> + compatible = "azw,beelink-a1", "rockchip,rk3328"; >>>> + >>>> + /* >>>> + * UART pins, as viewed with bottom of case removed: >>>> + * >>>> + * Front >>>> + * /------- >>>> + * L / o <- Gnd >>>> + * e / o <-- Rx >>>> + * f / o <--- Tx >>>> + * t / o <---- +3.3v >>>> + * | >>>> + */ >>>> + chosen { >>>> + stdout-path = "serial2:1500000n8"; >>>> + }; >>>> + >>>> + gmac_clkin: external-gmac-clock { >>>> + compatible = "fixed-clock"; >>>> + clock-frequency = <125000000>; >>>> + clock-output-names = "gmac_clkin"; >>>> + #clock-cells = <0>; >>>> + }; >>>> + >>>> + vcc_host_5v: usb3-current-switch { >>>> + compatible = "regulator-fixed"; >>>> + enable-active-high; >>>> + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; >>>> + pinctrl-names = "default"; >>>> + pinctrl-0 = <&usb30_host_drv>; >>>> + regulator-name = "vcc_host_5v"; >>>> + vin-supply = <&vcc_sys>; >>>> + }; >>>> + >>>> + vcc_sys: vcc-sys { >>>> + compatible = "regulator-fixed"; >>>> + regulator-name = "vcc_sys"; >>>> + regulator-min-microvolt = <5000000>; >>>> + regulator-max-microvolt = <5000000>; >>>> + }; >>>> + >>>> + cpus { >>>> + idle-states { >>>> + entry-method = "arm,psci"; >>>> + >>>> + cpu_sleep: cpu-sleep { >>>> + compatible = "arm,idle-state"; >>>> + arm,psci-suspend-param = <0x0010000>; >>>> + local-timer-stop; >>>> + entry-latency-us = <120>; >>>> + exit-latency-us = <250>; >>>> + min-residency-us = <900>; >>> >>> This doesn't seem like something that's board specific, but I guess >>> the regulator could have some influence on these times. If so, the >>> board file could always override a default. >> >> True, this is traceable back to the Rockchip Android BSP where it's >> actually applied to the entire SoC family[1]. I don't know if there's >> likely to be any difference between the downstream "RKTRUST" firmware >> binaries (which this nominally represents) and upstream ATF in terms of >> their PSCI implementation/performance. >> >> I've not got round to properly tinkering with suspend/resume and power >> management stuff yet, so I guess another option would be to just forget >> about this part for now - Heiko, any opinions? > > I think nobody actually knows what goes on in Rockchip's binary ATF > variant, which is the reason I dislike it so much ;-) . > > What's in the upstream sources should always take precedent. Looking > at rk3399 as an example where they had oversight from ChromeOS people > there are idle-states in rk3399.dtsi and I guess there should be a > counterpart int ATF. > > The idle-state values also match rk3399's cpu-sleep, so seem pretty > standard. So should just go into rk3328.dtsi after someone could verify > that this works with upstream ATF. OK, I'll drop this from the board DTS and have a crack at building some new firmware to investigate adding it to the SoC DTSI. Cheers, Robin.
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index c82c5e57d44c..f27f7805f57e 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -40,6 +40,11 @@ properties: - const: asus,rk3288-tinker-s - const: rockchip,rk3288 + - description: Beelink A1 + items: + - const: azw,beelink-a1 + - const: rockchip,rk3328 + - description: bq Curie 2 tablet items: - const: mundoreader,bq-curie2 diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 1f18a9392d15..a6f250e7cde2 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts new file mode 100644 index 000000000000..03ad663ff821 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts @@ -0,0 +1,399 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) +// Copyright (c) 2017-2019 Arm Ltd. + +/dts-v1/; +#include "rk3328.dtsi" + +/ { + model = "Beelink A1"; + compatible = "azw,beelink-a1", "rockchip,rk3328"; + + /* + * UART pins, as viewed with bottom of case removed: + * + * Front + * /------- + * L / o <- Gnd + * e / o <-- Rx + * f / o <--- Tx + * t / o <---- +3.3v + * | + */ + chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac_clkin: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_clkin"; + #clock-cells = <0>; + }; + + vcc_host_5v: usb3-current-switch { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb30_host_drv>; + regulator-name = "vcc_host_5v"; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + cpus { + idle-states { + entry-method = "arm,psci"; + + cpu_sleep: cpu-sleep { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <120>; + exit-latency-us = <250>; + min-residency-us = <900>; + }; + }; + }; + + analog-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "Analog A/V"; + + simple-audio-card,cpu { + sound-dai = <&i2s1>; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; + + hdmi-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "HDMI"; + + simple-audio-card,cpu { + sound-dai = <&i2s0>; + }; + + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; + }; +}; + +&codec { + status = "okay"; +}; + +&cpu0 { + cpu-idle-states = <&cpu_sleep>; + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-idle-states = <&cpu_sleep>; + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-idle-states = <&cpu_sleep>; + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-idle-states = <&cpu_sleep>; + cpu-supply = <&vdd_arm>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + no-sd; + no-sdio; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc18_emmc>; + status = "okay"; +}; + +&gmac2io { + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; + assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; + clock_in_out = "input"; + phy-handle = <&rtl8211f>; + phy-mode = "rgmii"; + phy-supply = <&vcc_io>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmiim1_pins>; + snps,aal; + snps,pbl = <0x4>; + tx_delay = <0x26>; + rx_delay = <0x11>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + rtl8211f: phy@0 { + reg = <0>; + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpu { + mali-supply = <&vdd_logic>; +}; + +&hdmi { + status = "okay"; +}; + +&hdmiphy { + status = "okay"; +}; + +&i2c1 { + clock-frequency = <1000000>; + i2c-scl-falling-time-ns = <5>; + i2c-scl-rising-time-ns = <83>; + status = "okay"; + + pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio2>; + interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_io>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_18: LDO_REG1 { + regulator-name = "vdd_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_emmc: LDO_REG2 { + regulator-name = "vcc_18emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_11: LDO_REG3 { + regulator-name = "vdd_11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + }; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&i2s1 { + status = "okay"; +}; + +&io_domains { + vccio1-supply = <&vcc_io>; + vccio2-supply = <&vcc18_emmc>; + vccio3-supply = <&vcc_io>; + vccio4-supply = <&vdd_18>; + vccio5-supply = <&vcc_io>; + vccio6-supply = <&vdd_18>; + pmuio-supply = <&vcc_io>; + status = "okay"; +}; + +&pinctrl { + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb3 { + usb30_host_drv: usb30-host-drv { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + bt_dis: bt-dis { + rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_output_low>; + }; + + bt_wake_host: bt-wake-host { + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + chip_en: chip-en { + rockchip,pins = <2 RK_PC3 RK_FUNC_GPIO &pcfg_output_low>; + }; + + host_wake_bt: host-wake-bt { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_output_high>; + }; + + wl_dis: wl-dis { + rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_output_low>; + }; + + wl_wake_host: wl-wake-host { + rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_io>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +&u2phy_otg { + status = "okay"; +}; + +&usb20_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usb_host0_ehci { + pinctrl-names = "default"; + pinctrl-0 = <&bt_dis &bt_wake_host &chip_en &host_wake_bt &wl_dis &wl_wake_host>; + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +};
Beelink A1 is a TV box implementing the higher-end options of the RK3328 reference design - the DTB from the stock Android firmware is clearly the "rk3328-box-plus" variant from the Rockchip 3.10 BSP with minor modifications to accommodate the USB WiFi module and additional VFD-style LED driver. It features: - 4GB of 32-bit LPDDR3 - 16GB of HS200 eMMC (newer models with 32GB also exist) - Realtek RTL8211F phy for gigabit ethernet - Fn-Link 6221E-UUC module (RealTek RTL8821CU) for 11ac WiFi and Bluetooth 4.2 - HDMI and analog A/V - 1x USB 3.0 type A host, 1x USB 2.0 type A OTG, 1x micro SD - IR receiver and a neat little LED clock display. Signed-off-by: Robin Murphy <robin.murphy@arm.com> --- One question I'm wondering about is whether it's worth pushing the HDMI and analog codec audio cards down into rk3328.dtsi (as with HDMI audio on RK3399), since those audio pipelines are internal to the SoC and the board only really governs whether the outputs are wired up or not. .../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + arch/arm64/boot/dts/rockchip/rk3328-a1.dts | 399 ++++++++++++++++++ 3 files changed, 405 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-a1.dts