| Message ID | 1611149511-4990-1-git-send-email-milan.lakhani@codethink.co.uk (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | docs: Update DTB format references | expand |
On Wed, 20 Jan 2021 13:31:51 +0000 Milan Lakhani <milan.lakhani@codethink.co.uk> wrote: > There were two references to devicetree/booting-without-of.rst (which has > been removed) for DTB format information, and > devicetree/usage-model.rst pointed to > https://elinux.org/Device_Tree_Usage. Change all three of these references to > https://www.devicetree.org/specifications/. > > Signed-off-by: Milan Lakhani <milan.lakhani@codethink.co.uk> > --- > Documentation/arm/booting.rst | 2 +- > Documentation/devicetree/usage-model.rst | 2 +- > Documentation/translations/zh_CN/arm/Booting | 2 +- > 3 files changed, 3 insertions(+), 3 deletions(-) Applied, thanks. jon -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#238): https://lists.elisa.tech/g/linux-safety/message/238 Mute This Topic: https://lists.elisa.tech/mt/79978198/5278000 Group Owner: linux-safety+owner@lists.elisa.tech Unsubscribe: https://lists.elisa.tech/g/linux-safety/unsub [linux-safety@archiver.kernel.org] -=-=-=-=-=-=-=-=-=-=-=-
diff --git a/Documentation/arm/booting.rst b/Documentation/arm/booting.rst index a226345..14bca5b 100644 --- a/Documentation/arm/booting.rst +++ b/Documentation/arm/booting.rst @@ -128,7 +128,7 @@ it. The recommended placement is in the first 16KiB of RAM. The boot loader must load a device tree image (dtb) into system ram at a 64bit aligned address and initialize it with the boot data. The -dtb format is documented in Documentation/devicetree/booting-without-of.rst. +dtb format is documented in https://www.devicetree.org/specifications/. The kernel will look for the dtb magic value of 0xd00dfeed at the dtb physical address to determine if a dtb has been passed instead of a tagged list. diff --git a/Documentation/devicetree/usage-model.rst b/Documentation/devicetree/usage-model.rst index e1b42dc..1eb8349 100644 --- a/Documentation/devicetree/usage-model.rst +++ b/Documentation/devicetree/usage-model.rst @@ -12,7 +12,7 @@ This article describes how Linux uses the device tree. An overview of the device tree data format can be found on the device tree usage page at devicetree.org\ [1]_. -.. [1] https://elinux.org/Device_Tree_Usage +.. [1] https://www.devicetree.org/specifications/ The "Open Firmware Device Tree", or simply Device Tree (DT), is a data structure and language for describing hardware. More specifically, it diff --git a/Documentation/translations/zh_CN/arm/Booting b/Documentation/translations/zh_CN/arm/Booting index c3d26ce..5ecea07 100644 --- a/Documentation/translations/zh_CN/arm/Booting +++ b/Documentation/translations/zh_CN/arm/Booting @@ -124,7 +124,7 @@ bootloader 必须传递一个系统内存的位置和最小值，以及根文件 bootloader 必须以 64bit 地址对齐的形式加载一个设备树映像(dtb)到系统 RAM 中，并用启动数据初始化它。dtb 格式在文档 -Documentation/devicetree/booting-without-of.rst 中。内核将会在 +https://www.devicetree.org/specifications/ 中。内核将会在 dtb 物理地址处查找 dtb 魔数值（0xd00dfeed），以确定 dtb 是否已经代替 标签列表被传递进来。
There were two references to devicetree/booting-without-of.rst (which has been removed) for DTB format information, and devicetree/usage-model.rst pointed to https://elinux.org/Device_Tree_Usage. Change all three of these references to https://www.devicetree.org/specifications/. Signed-off-by: Milan Lakhani <milan.lakhani@codethink.co.uk> --- Documentation/arm/booting.rst | 2 +- Documentation/devicetree/usage-model.rst | 2 +- Documentation/translations/zh_CN/arm/Booting | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)