mbox series

[v2,0/3] add initial support for exynosautov9

Message ID 20211008091443.44625-1-chanho61.park@samsung.com (mailing list archive)
Headers show
Series add initial support for exynosautov9 | expand

Message

Chanho Park Oct. 8, 2021, 9:14 a.m. UTC 
This patchset supports minimal set for ExynosAuto v9 SoC and SADK board.
This contains serial_0 as uart console and ufs_0 for rootfs storage.
Regarding UFS, it depends on UFS patchset[1].

[1]: https://lore.kernel.org/linux-samsung-soc/20211007080934.108804-1-chanho61.park@samsung.com/T/#t

Changes since v1:
- add static and  __initconst of patch1
- Use pin and pins suffix for pinctrl nodes
- Remove non-SoC pins
- Move fixed rate clock nodes out of soc@0
- Add cortex-a76 compatibles to cpu and pmu node.
- Use lowercase of address representations
- Add pmu / syscon compatible.

Chanho Park (3):
  pinctrl: samsung: support ExynosAutov9 SoC pinctrl
  arm64: dts: exynos: add initial support for exynosautov9 SoC
  arm64: dts: exynos: add minimal support for exynosautov9 sadk board

 .../bindings/arm/samsung/samsung-boards.yaml  |    6 +
 .../devicetree/bindings/mfd/syscon.yaml       |    1 +
 .../bindings/pinctrl/samsung-pinctrl.txt      |    1 +
 arch/arm64/boot/dts/exynos/Makefile           |    3 +-
 .../boot/dts/exynos/exynosautov9-pinctrl.dtsi | 1189 +++++++++++++++++
 .../boot/dts/exynos/exynosautov9-sadk.dts     |   56 +
 arch/arm64/boot/dts/exynos/exynosautov9.dtsi  |  301 +++++
 .../pinctrl/samsung/pinctrl-exynos-arm64.c    |  108 ++
 drivers/pinctrl/samsung/pinctrl-samsung.c     |    2 +
 drivers/pinctrl/samsung/pinctrl-samsung.h     |    1 +
 10 files changed, 1667 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
 create mode 100644 arch/arm64/boot/dts/exynos/exynosautov9.dtsi