| Message ID | 000d01ce7700$222a35a0$667ea0e0$@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Jingoo, On Tuesday 02 of July 2013 17:42:49 Jingoo Han wrote: > Use the generic PHY API instead of the platform callback to control > the DP PHY. > > Signed-off-by: Jingoo Han <jg1.han@samsung.com> > --- > .../devicetree/bindings/video/exynos_dp.txt | 23 > +++++--------------- drivers/video/exynos/exynos_dp_core.c > | 16 ++++++++++---- drivers/video/exynos/exynos_dp_core.h > | 2 ++ > 3 files changed, 20 insertions(+), 21 deletions(-) > > diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt > b/Documentation/devicetree/bindings/video/exynos_dp.txt index > 84f10c1..022f4b6 100644 > --- a/Documentation/devicetree/bindings/video/exynos_dp.txt > +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt > @@ -1,17 +1,6 @@ > The Exynos display port interface should be configured based on > the type of panel connected to it. > > -We use two nodes: > - -dp-controller node > - -dptx-phy node(defined inside dp-controller node) > - > -For the DP-PHY initialization, we use the dptx-phy node. > -Required properties for dptx-phy: > - -reg: > - Base address of DP PHY register. > - -samsung,enable-mask: > - The bit-mask used to enable/disable DP PHY. > - I wonder if this part shouldn't stay here, just marked as deprecated, because compatibility with old dtbs must be preserved (and rest of the patch looks like it is). > For the Panel initialization, we read data from dp-controller node. > Required properties for dp-controller: > -compatible: > @@ -25,6 +14,10 @@ Required properties for dp-controller: > from common clock binding: handle to dp clock. > -clock-names: > from common clock binding: Shall be "dp". > + -phys: > + from general PHY binding: the phandle for the PHY device. > + -phy-names: > + from general PHY binding: Should be "dp". > -interrupt-parent: > phandle to Interrupt combiner node. > -samsung,color-space: > @@ -67,12 +60,8 @@ SOC specific portion: > interrupt-parent = <&combiner>; > clocks = <&clock 342>; > clock-names = "dp"; > - > - dptx-phy { > - reg = <0x10040720>; > - samsung,enable-mask = <1>; > - }; > - > + phys = <&dp_phy>; > + phy-names = "dp"; > }; > > Board Specific portion: > diff --git a/drivers/video/exynos/exynos_dp_core.c > b/drivers/video/exynos/exynos_dp_core.c index 05fed7d..5e1a715 100644 > --- a/drivers/video/exynos/exynos_dp_core.c > +++ b/drivers/video/exynos/exynos_dp_core.c > @@ -19,6 +19,7 @@ > #include <linux/interrupt.h> > #include <linux/delay.h> > #include <linux/of.h> > +#include <linux/phy/phy.h> > > #include "exynos_dp_core.h" > > @@ -960,8 +961,11 @@ static int exynos_dp_dt_parse_phydata(struct > exynos_dp_device *dp) > > dp_phy_node = of_find_node_by_name(dp_phy_node, "dptx-phy"); > if (!dp_phy_node) { > - dev_err(dp->dev, "could not find dptx-phy node\n"); > - return -ENODEV; > + dp->phy = devm_phy_get(dp->dev, "dp"); > + if (IS_ERR(dp->phy)) > + return PTR_ERR(dp->phy); > + else > + return 0; > } > > if (of_property_read_u32(dp_phy_node, "reg", &phy_base)) { > @@ -992,7 +996,9 @@ err: > > static void exynos_dp_phy_init(struct exynos_dp_device *dp) > { > - if (dp->phy_addr) { > + if (dp->phy) { > + phy_power_on(dp->phy); > + } else if (dp->phy_addr) { > u32 reg; > > reg = __raw_readl(dp->phy_addr); > @@ -1003,7 +1009,9 @@ static void exynos_dp_phy_init(struct > exynos_dp_device *dp) > > static void exynos_dp_phy_exit(struct exynos_dp_device *dp) > { > - if (dp->phy_addr) { > + if (dp->phy) { > + phy_power_off(dp->phy); > + } else if (dp->phy_addr) { > u32 reg; > > reg = __raw_readl(dp->phy_addr); > diff --git a/drivers/video/exynos/exynos_dp_core.h > b/drivers/video/exynos/exynos_dp_core.h index 56cfec8..87804b6 100644 > --- a/drivers/video/exynos/exynos_dp_core.h > +++ b/drivers/video/exynos/exynos_dp_core.h > @@ -151,6 +151,8 @@ struct exynos_dp_device { > struct video_info *video_info; > struct link_train link_train; > struct work_struct hotplug_work; > + nit: unnecessary blank line > + struct phy *phy; > }; > > /* exynos_dp_reg.c */ Otherwise looks good. Reviewed-by: Tomasz Figa <t.figa@samsung.com> Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Saturday, July 06, 2013 8:04 AM, Tomasz Figa wrote: > > Hi Jingoo, > > On Tuesday 02 of July 2013 17:42:49 Jingoo Han wrote: > > Use the generic PHY API instead of the platform callback to control > > the DP PHY. > > > > Signed-off-by: Jingoo Han <jg1.han@samsung.com> > > --- > > .../devicetree/bindings/video/exynos_dp.txt | 23 > > +++++--------------- drivers/video/exynos/exynos_dp_core.c > > | 16 ++++++++++---- drivers/video/exynos/exynos_dp_core.h > > | 2 ++ > > 3 files changed, 20 insertions(+), 21 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt > > b/Documentation/devicetree/bindings/video/exynos_dp.txt index > > 84f10c1..022f4b6 100644 > > --- a/Documentation/devicetree/bindings/video/exynos_dp.txt > > +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt > > @@ -1,17 +1,6 @@ > > The Exynos display port interface should be configured based on > > the type of panel connected to it. > > > > -We use two nodes: > > - -dp-controller node > > - -dptx-phy node(defined inside dp-controller node) > > - > > -For the DP-PHY initialization, we use the dptx-phy node. > > -Required properties for dptx-phy: > > - -reg: > > - Base address of DP PHY register. > > - -samsung,enable-mask: > > - The bit-mask used to enable/disable DP PHY. > > - > > I wonder if this part shouldn't stay here, just marked as deprecated, > because compatibility with old dtbs must be preserved (and rest of the > patch looks like it is). I would like to remove these properties from Documentation. But, I will mark it as deprecated as you suggested.. Best regards, Jingoo Han -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt index 84f10c1..022f4b6 100644 --- a/Documentation/devicetree/bindings/video/exynos_dp.txt +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt @@ -1,17 +1,6 @@ The Exynos display port interface should be configured based on the type of panel connected to it. -We use two nodes: - -dp-controller node - -dptx-phy node(defined inside dp-controller node) - -For the DP-PHY initialization, we use the dptx-phy node. -Required properties for dptx-phy: - -reg: - Base address of DP PHY register. - -samsung,enable-mask: - The bit-mask used to enable/disable DP PHY. - For the Panel initialization, we read data from dp-controller node. Required properties for dp-controller: -compatible: @@ -25,6 +14,10 @@ Required properties for dp-controller: from common clock binding: handle to dp clock. -clock-names: from common clock binding: Shall be "dp". + -phys: + from general PHY binding: the phandle for the PHY device. + -phy-names: + from general PHY binding: Should be "dp". -interrupt-parent: phandle to Interrupt combiner node. -samsung,color-space: @@ -67,12 +60,8 @@ SOC specific portion: interrupt-parent = <&combiner>; clocks = <&clock 342>; clock-names = "dp"; - - dptx-phy { - reg = <0x10040720>; - samsung,enable-mask = <1>; - }; - + phys = <&dp_phy>; + phy-names = "dp"; }; Board Specific portion: diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c index 05fed7d..5e1a715 100644 --- a/drivers/video/exynos/exynos_dp_core.c +++ b/drivers/video/exynos/exynos_dp_core.c @@ -19,6 +19,7 @@ #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/of.h> +#include <linux/phy/phy.h> #include "exynos_dp_core.h" @@ -960,8 +961,11 @@ static int exynos_dp_dt_parse_phydata(struct exynos_dp_device *dp) dp_phy_node = of_find_node_by_name(dp_phy_node, "dptx-phy"); if (!dp_phy_node) { - dev_err(dp->dev, "could not find dptx-phy node\n"); - return -ENODEV; + dp->phy = devm_phy_get(dp->dev, "dp"); + if (IS_ERR(dp->phy)) + return PTR_ERR(dp->phy); + else + return 0; } if (of_property_read_u32(dp_phy_node, "reg", &phy_base)) { @@ -992,7 +996,9 @@ err: static void exynos_dp_phy_init(struct exynos_dp_device *dp) { - if (dp->phy_addr) { + if (dp->phy) { + phy_power_on(dp->phy); + } else if (dp->phy_addr) { u32 reg; reg = __raw_readl(dp->phy_addr); @@ -1003,7 +1009,9 @@ static void exynos_dp_phy_init(struct exynos_dp_device *dp) static void exynos_dp_phy_exit(struct exynos_dp_device *dp) { - if (dp->phy_addr) { + if (dp->phy) { + phy_power_off(dp->phy); + } else if (dp->phy_addr) { u32 reg; reg = __raw_readl(dp->phy_addr); diff --git a/drivers/video/exynos/exynos_dp_core.h b/drivers/video/exynos/exynos_dp_core.h index 56cfec8..87804b6 100644 --- a/drivers/video/exynos/exynos_dp_core.h +++ b/drivers/video/exynos/exynos_dp_core.h @@ -151,6 +151,8 @@ struct exynos_dp_device { struct video_info *video_info; struct link_train link_train; struct work_struct hotplug_work; + + struct phy *phy; }; /* exynos_dp_reg.c */
Use the generic PHY API instead of the platform callback to control the DP PHY. Signed-off-by: Jingoo Han <jg1.han@samsung.com> --- .../devicetree/bindings/video/exynos_dp.txt | 23 +++++--------------- drivers/video/exynos/exynos_dp_core.c | 16 ++++++++++---- drivers/video/exynos/exynos_dp_core.h | 2 ++ 3 files changed, 20 insertions(+), 21 deletions(-)