| Message ID | 1359937815-29851-1-git-send-email-amit.daniel@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sun, 2013-02-03 at 16:30 -0800, Amit Daniel Kachhap wrote: > This patch adds support to set the emulated temperature method in > thermal zone (sensor). After setting this feature thermal zone may > report this temperature and not the actual temperature. The emulation > implementation may be based on sensor capability through platform > specific handler or pure software emulation if no platform handler defined. > > This is useful in debugging different temperature threshold and its > associated cooling action. Critical threshold's cannot be emulated. > Writing 0 on this node should disable emulation. > > Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> > Acked-by: Kukjin Kim <kgene.kim@samsung.com> applied to thermal -next. thanks, rui > --- > Changes in V3: > * Removed the un-necessary get_temp pointer check. > * Added the read temp code in #ifdef EMULATION macros > > Changes in V2: > * Added config option for enabling emulation support. > * Added s/w emulation if no platform handler registered. > * skip the critical trip point emulation > > This patchset is based on thermal maintainer next tree. > git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git next > > Documentation/thermal/sysfs-api.txt | 13 ++++++ > drivers/thermal/Kconfig | 8 ++++ > drivers/thermal/thermal_sys.c | 79 ++++++++++++++++++++++++++++++----- > include/linux/thermal.h | 2 + > 4 files changed, 91 insertions(+), 11 deletions(-) > > diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt > index 526d4b9..6859661 100644 > --- a/Documentation/thermal/sysfs-api.txt > +++ b/Documentation/thermal/sysfs-api.txt > @@ -55,6 +55,8 @@ temperature) and throttle appropriate devices. > .get_trip_type: get the type of certain trip point. > .get_trip_temp: get the temperature above which the certain trip point > will be fired. > + .set_emul_temp: set the emulation temperature which helps in debugging > + different threshold temperature points. > > 1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz) > > @@ -153,6 +155,7 @@ Thermal zone device sys I/F, created once it's registered: > |---trip_point_[0-*]_temp: Trip point temperature > |---trip_point_[0-*]_type: Trip point type > |---trip_point_[0-*]_hyst: Hysteresis value for this trip point > + |---emul_temp: Emulated temperature set node > > Thermal cooling device sys I/F, created once it's registered: > /sys/class/thermal/cooling_device[0-*]: > @@ -252,6 +255,16 @@ passive > Valid values: 0 (disabled) or greater than 1000 > RW, Optional > > +emul_temp > + Interface to set the emulated temperature method in thermal zone > + (sensor). After setting this temperature, the thermal zone may pass > + this temperature to platform emulation function if registered or > + cache it locally. This is useful in debugging different temperature > + threshold and its associated cooling action. This is write only node > + and writing 0 on this node should disable emulation. > + Unit: millidegree Celsius > + WO, Optional > + > ***************************** > * Cooling device attributes * > ***************************** > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > index faf38c5..e4cf7fb 100644 > --- a/drivers/thermal/Kconfig > +++ b/drivers/thermal/Kconfig > @@ -78,6 +78,14 @@ config CPU_THERMAL > and not the ACPI interface. > If you want this support, you should say Y here. > > +config THERMAL_EMULATION > + bool "Thermal emulation mode support" > + help > + Enable this option to make a emul_temp sysfs node in thermal zone > + directory to support temperature emulation. With emulation sysfs node, > + user can manually input temperature and test the different trip > + threshold behaviour for simulation purpose. > + > config SPEAR_THERMAL > bool "SPEAr thermal sensor driver" > depends on PLAT_SPEAR > diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c > index 0a1bf6b..0675687 100644 > --- a/drivers/thermal/thermal_sys.c > +++ b/drivers/thermal/thermal_sys.c > @@ -378,24 +378,54 @@ static void handle_thermal_trip(struct thermal_zone_device *tz, int trip) > monitor_thermal_zone(tz); > } > > +static int thermal_zone_get_temp(struct thermal_zone_device *tz, > + unsigned long *temp) > +{ > + int ret = 0, count; > + unsigned long crit_temp = -1UL; > + enum thermal_trip_type type; > + > + mutex_lock(&tz->lock); > + > + ret = tz->ops->get_temp(tz, temp); > +#ifdef CONFIG_THERMAL_EMULATION > + if (!tz->emul_temperature) > + goto skip_emul; > + > + for (count = 0; count < tz->trips; count++) { > + ret = tz->ops->get_trip_type(tz, count, &type); > + if (!ret && type == THERMAL_TRIP_CRITICAL) { > + ret = tz->ops->get_trip_temp(tz, count, &crit_temp); > + break; > + } > + } > + > + if (ret) > + goto skip_emul; > + > + if (*temp < crit_temp) > + *temp = tz->emul_temperature; > +skip_emul: > +#endif > + mutex_unlock(&tz->lock); > + return ret; > +} > + > static void update_temperature(struct thermal_zone_device *tz) > { > long temp; > int ret; > > - mutex_lock(&tz->lock); > - > - ret = tz->ops->get_temp(tz, &temp); > + ret = thermal_zone_get_temp(tz, &temp); > if (ret) { > dev_warn(&tz->device, "failed to read out thermal zone %d\n", > tz->id); > - goto exit; > + return; > } > > + mutex_lock(&tz->lock); > tz->last_temperature = tz->temperature; > tz->temperature = temp; > - > -exit: > mutex_unlock(&tz->lock); > } > > @@ -438,10 +468,7 @@ temp_show(struct device *dev, struct device_attribute *attr, char *buf) > long temperature; > int ret; > > - if (!tz->ops->get_temp) > - return -EPERM; > - > - ret = tz->ops->get_temp(tz, &temperature); > + ret = thermal_zone_get_temp(tz, &temperature); > > if (ret) > return ret; > @@ -701,6 +728,31 @@ policy_show(struct device *dev, struct device_attribute *devattr, char *buf) > return sprintf(buf, "%s\n", tz->governor->name); > } > > +#ifdef CONFIG_THERMAL_EMULATION > +static ssize_t > +emul_temp_store(struct device *dev, struct device_attribute *attr, > + const char *buf, size_t count) > +{ > + struct thermal_zone_device *tz = to_thermal_zone(dev); > + int ret = 0; > + unsigned long temperature; > + > + if (kstrtoul(buf, 10, &temperature)) > + return -EINVAL; > + > + if (!tz->ops->set_emul_temp) { > + mutex_lock(&tz->lock); > + tz->emul_temperature = temperature; > + mutex_unlock(&tz->lock); > + } else { > + ret = tz->ops->set_emul_temp(tz, temperature); > + } > + > + return ret ? ret : count; > +} > +static DEVICE_ATTR(emul_temp, S_IWUSR, NULL, emul_temp_store); > +#endif/*CONFIG_THERMAL_EMULATION*/ > + > static DEVICE_ATTR(type, 0444, type_show, NULL); > static DEVICE_ATTR(temp, 0444, temp_show, NULL); > static DEVICE_ATTR(mode, 0644, mode_show, mode_store); > @@ -843,7 +895,7 @@ temp_input_show(struct device *dev, struct device_attribute *attr, char *buf) > temp_input); > struct thermal_zone_device *tz = temp->tz; > > - ret = tz->ops->get_temp(tz, &temperature); > + ret = thermal_zone_get_temp(tz, &temperature); > > if (ret) > return ret; > @@ -1596,6 +1648,11 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, > goto unregister; > } > > +#ifdef CONFIG_THERMAL_EMULATION > + result = device_create_file(&tz->device, &dev_attr_emul_temp); > + if (result) > + goto unregister; > +#endif > /* Create policy attribute */ > result = device_create_file(&tz->device, &dev_attr_policy); > if (result) > diff --git a/include/linux/thermal.h b/include/linux/thermal.h > index 9b78f8c..f0bd7f9 100644 > --- a/include/linux/thermal.h > +++ b/include/linux/thermal.h > @@ -123,6 +123,7 @@ struct thermal_zone_device_ops { > int (*set_trip_hyst) (struct thermal_zone_device *, int, > unsigned long); > int (*get_crit_temp) (struct thermal_zone_device *, unsigned long *); > + int (*set_emul_temp) (struct thermal_zone_device *, unsigned long); > int (*get_trend) (struct thermal_zone_device *, int, > enum thermal_trend *); > int (*notify) (struct thermal_zone_device *, int, > @@ -165,6 +166,7 @@ struct thermal_zone_device { > int polling_delay; > int temperature; > int last_temperature; > + int emul_temperature; > int passive; > unsigned int forced_passive; > const struct thermal_zone_device_ops *ops; -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index 526d4b9..6859661 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -55,6 +55,8 @@ temperature) and throttle appropriate devices. .get_trip_type: get the type of certain trip point. .get_trip_temp: get the temperature above which the certain trip point will be fired. + .set_emul_temp: set the emulation temperature which helps in debugging + different threshold temperature points. 1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz) @@ -153,6 +155,7 @@ Thermal zone device sys I/F, created once it's registered: |---trip_point_[0-*]_temp: Trip point temperature |---trip_point_[0-*]_type: Trip point type |---trip_point_[0-*]_hyst: Hysteresis value for this trip point + |---emul_temp: Emulated temperature set node Thermal cooling device sys I/F, created once it's registered: /sys/class/thermal/cooling_device[0-*]: @@ -252,6 +255,16 @@ passive Valid values: 0 (disabled) or greater than 1000 RW, Optional +emul_temp + Interface to set the emulated temperature method in thermal zone + (sensor). After setting this temperature, the thermal zone may pass + this temperature to platform emulation function if registered or + cache it locally. This is useful in debugging different temperature + threshold and its associated cooling action. This is write only node + and writing 0 on this node should disable emulation. + Unit: millidegree Celsius + WO, Optional + ***************************** * Cooling device attributes * ***************************** diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index faf38c5..e4cf7fb 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -78,6 +78,14 @@ config CPU_THERMAL and not the ACPI interface. If you want this support, you should say Y here. +config THERMAL_EMULATION + bool "Thermal emulation mode support" + help + Enable this option to make a emul_temp sysfs node in thermal zone + directory to support temperature emulation. With emulation sysfs node, + user can manually input temperature and test the different trip + threshold behaviour for simulation purpose. + config SPEAR_THERMAL bool "SPEAr thermal sensor driver" depends on PLAT_SPEAR diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 0a1bf6b..0675687 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -378,24 +378,54 @@ static void handle_thermal_trip(struct thermal_zone_device *tz, int trip) monitor_thermal_zone(tz); } +static int thermal_zone_get_temp(struct thermal_zone_device *tz, + unsigned long *temp) +{ + int ret = 0, count; + unsigned long crit_temp = -1UL; + enum thermal_trip_type type; + + mutex_lock(&tz->lock); + + ret = tz->ops->get_temp(tz, temp); +#ifdef CONFIG_THERMAL_EMULATION + if (!tz->emul_temperature) + goto skip_emul; + + for (count = 0; count < tz->trips; count++) { + ret = tz->ops->get_trip_type(tz, count, &type); + if (!ret && type == THERMAL_TRIP_CRITICAL) { + ret = tz->ops->get_trip_temp(tz, count, &crit_temp); + break; + } + } + + if (ret) + goto skip_emul; + + if (*temp < crit_temp) + *temp = tz->emul_temperature; +skip_emul: +#endif + mutex_unlock(&tz->lock); + return ret; +} + static void update_temperature(struct thermal_zone_device *tz) { long temp; int ret; - mutex_lock(&tz->lock); - - ret = tz->ops->get_temp(tz, &temp); + ret = thermal_zone_get_temp(tz, &temp); if (ret) { dev_warn(&tz->device, "failed to read out thermal zone %d\n", tz->id); - goto exit; + return; } + mutex_lock(&tz->lock); tz->last_temperature = tz->temperature; tz->temperature = temp; - -exit: mutex_unlock(&tz->lock); } @@ -438,10 +468,7 @@ temp_show(struct device *dev, struct device_attribute *attr, char *buf) long temperature; int ret; - if (!tz->ops->get_temp) - return -EPERM; - - ret = tz->ops->get_temp(tz, &temperature); + ret = thermal_zone_get_temp(tz, &temperature); if (ret) return ret; @@ -701,6 +728,31 @@ policy_show(struct device *dev, struct device_attribute *devattr, char *buf) return sprintf(buf, "%s\n", tz->governor->name); } +#ifdef CONFIG_THERMAL_EMULATION +static ssize_t +emul_temp_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + int ret = 0; + unsigned long temperature; + + if (kstrtoul(buf, 10, &temperature)) + return -EINVAL; + + if (!tz->ops->set_emul_temp) { + mutex_lock(&tz->lock); + tz->emul_temperature = temperature; + mutex_unlock(&tz->lock); + } else { + ret = tz->ops->set_emul_temp(tz, temperature); + } + + return ret ? ret : count; +} +static DEVICE_ATTR(emul_temp, S_IWUSR, NULL, emul_temp_store); +#endif/*CONFIG_THERMAL_EMULATION*/ + static DEVICE_ATTR(type, 0444, type_show, NULL); static DEVICE_ATTR(temp, 0444, temp_show, NULL); static DEVICE_ATTR(mode, 0644, mode_show, mode_store); @@ -843,7 +895,7 @@ temp_input_show(struct device *dev, struct device_attribute *attr, char *buf) temp_input); struct thermal_zone_device *tz = temp->tz; - ret = tz->ops->get_temp(tz, &temperature); + ret = thermal_zone_get_temp(tz, &temperature); if (ret) return ret; @@ -1596,6 +1648,11 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, goto unregister; } +#ifdef CONFIG_THERMAL_EMULATION + result = device_create_file(&tz->device, &dev_attr_emul_temp); + if (result) + goto unregister; +#endif /* Create policy attribute */ result = device_create_file(&tz->device, &dev_attr_policy); if (result) diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 9b78f8c..f0bd7f9 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -123,6 +123,7 @@ struct thermal_zone_device_ops { int (*set_trip_hyst) (struct thermal_zone_device *, int, unsigned long); int (*get_crit_temp) (struct thermal_zone_device *, unsigned long *); + int (*set_emul_temp) (struct thermal_zone_device *, unsigned long); int (*get_trend) (struct thermal_zone_device *, int, enum thermal_trend *); int (*notify) (struct thermal_zone_device *, int, @@ -165,6 +166,7 @@ struct thermal_zone_device { int polling_delay; int temperature; int last_temperature; + int emul_temperature; int passive; unsigned int forced_passive; const struct thermal_zone_device_ops *ops;