| Message ID | 1364297642-2746-6-git-send-email-amit.daniel@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 26-03-2013 07:33, Amit Daniel Kachhap wrote: > This code changes the zone handling to use the trip count passed > by the TMU driver. This also helps in adding more zone support. > > Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> > > --- > drivers/thermal/samsung/exynos_common.c | 56 +++++++++++++------------ > drivers/thermal/samsung/exynos_common.h | 13 +++--- > include/linux/platform_data/exynos_thermal.h | 7 ++- > 3 files changed, 40 insertions(+), 36 deletions(-) > > diff --git a/drivers/thermal/samsung/exynos_common.c b/drivers/thermal/samsung/exynos_common.c > index 649d67c..0c0098d 100644 > --- a/drivers/thermal/samsung/exynos_common.c > +++ b/drivers/thermal/samsung/exynos_common.c > @@ -84,17 +84,16 @@ static int exynos_set_mode(struct thermal_zone_device *thermal, > static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip, > enum thermal_trip_type *type) > { > - switch (GET_ZONE(trip)) { > - case MONITOR_ZONE: > - case WARN_ZONE: > - *type = THERMAL_TRIP_ACTIVE; > - break; > - case PANIC_ZONE: > - *type = THERMAL_TRIP_CRITICAL; > - break; > - default: > + struct exynos_thermal_zone *th_zone = thermal->devdata; > + int max_trip = th_zone->sensor_conf->trip_data.trip_count; > + > + if (trip < 0 || trip >= max_trip) > return -EINVAL; > - } > + else if (trip == (max_trip - 1)) > + *type = THERMAL_TRIP_CRITICAL; > + else > + *type = THERMAL_TRIP_ACTIVE; > + > return 0; > } > > @@ -103,8 +102,9 @@ static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip, > unsigned long *temp) > { > struct exynos_thermal_zone *th_zone = thermal->devdata; > + int max_trip = th_zone->sensor_conf->trip_data.trip_count; > > - if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE)) > + if (trip < 0 || trip >= max_trip) > return -EINVAL; > > *temp = th_zone->sensor_conf->trip_data.trip_val[trip]; > @@ -118,10 +118,10 @@ static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip, > static int exynos_get_crit_temp(struct thermal_zone_device *thermal, > unsigned long *temp) > { > - int ret; > - /* Panic zone */ > - ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp); > - return ret; > + struct exynos_thermal_zone *th_zone = thermal->devdata; > + int max_trip = th_zone->sensor_conf->trip_data.trip_count; > + /* Get the temp of highest trip*/ > + return exynos_get_trip_temp(thermal, max_trip - 1, temp); > } > > int exynos_get_frequency_level(unsigned int cpu, unsigned int freq) > @@ -157,7 +157,7 @@ static int exynos_bind(struct thermal_zone_device *thermal, > tab_size = data->cooling_data.freq_clip_count; > > if (tab_ptr == NULL || tab_size == 0) > - return -EINVAL; > + return 0; > > /* find the cooling device registered*/ > for (i = 0; i < th_zone->cool_dev_size; i++) > @@ -206,7 +206,7 @@ static int exynos_unbind(struct thermal_zone_device *thermal, > tab_size = data->cooling_data.freq_clip_count; > > if (tab_size == 0) > - return -EINVAL; > + return 0; > > /* find the cooling device registered*/ > for (i = 0; i < th_zone->cool_dev_size; i++) The above two chunks are confusing. I dont understand how they are now supposed to be valid settings. > @@ -366,19 +366,21 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) > return -ENOMEM; > > th_zone->sensor_conf = sensor_conf; > - cpumask_set_cpu(0, &mask_val); > - th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val); > - if (IS_ERR(th_zone->cool_dev[0])) { > - pr_err("Failed to register cpufreq cooling device\n"); > - ret = -EINVAL; > - goto err_unregister; > + if (sensor_conf->cooling_data.freq_clip_count > 0) { > + cpumask_set_cpu(0, &mask_val); > + th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val); > + if (IS_ERR(th_zone->cool_dev[0])) { > + pr_err("Failed to register cpufreq cooling device\n"); > + ret = -EINVAL; > + goto err_unregister; > + } > + th_zone->cool_dev_size++; > } > - th_zone->cool_dev_size++; > > th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name, > - EXYNOS_ZONE_COUNT, 0, th_zone, &exynos_dev_ops, NULL, 0, > - sensor_conf->trip_data.trigger_falling ? > - 0 : IDLE_INTERVAL); > + sensor_conf->trip_data.trip_count, 0, th_zone, &exynos_dev_ops, > + NULL, 0, sensor_conf->trip_data.trigger_falling ? > + 0 : IDLE_INTERVAL); > > if (IS_ERR(th_zone->therm_dev)) { > pr_err("Failed to register thermal zone device\n"); > diff --git a/drivers/thermal/samsung/exynos_common.h b/drivers/thermal/samsung/exynos_common.h > index b8d289e..453e09a 100644 > --- a/drivers/thermal/samsung/exynos_common.h > +++ b/drivers/thermal/samsung/exynos_common.h > @@ -27,23 +27,22 @@ > #define SENSOR_NAME_LEN 16 > #define MAX_TRIP_COUNT 8 > #define MAX_COOLING_DEVICE 4 > -#define MAX_THRESHOLD_LEVS 4 > +#define MAX_THRESHOLD_LEVS 5 > > #define ACTIVE_INTERVAL 500 > #define IDLE_INTERVAL 10000 > #define MCELSIUS 1000 > > /* CPU Zone information */ > -#define PANIC_ZONE 4 > -#define WARN_ZONE 3 > -#define MONITOR_ZONE 2 > -#define SAFE_ZONE 1 > +#define PANIC_ZONE 5 > +#define ALARM_ZONE 4 > +#define WARN_ZONE 3 > +#define MONITOR_ZONE 2 > +#define SAFE_ZONE 1 > Updating this does not seam to be part of the intent of this patch. You probably want to send a separate patch for this. > #define GET_ZONE(trip) (trip + 2) > #define GET_TRIP(zone) (zone - 2) > > -#define EXYNOS_ZONE_COUNT 3 > - > struct thermal_trip_point_conf { > int trip_val[MAX_TRIP_COUNT]; > int trip_count; > diff --git a/include/linux/platform_data/exynos_thermal.h b/include/linux/platform_data/exynos_thermal.h > index da7e627..893b758 100644 > --- a/include/linux/platform_data/exynos_thermal.h > +++ b/include/linux/platform_data/exynos_thermal.h > @@ -23,6 +23,8 @@ > #define _LINUX_EXYNOS_THERMAL_H > #include <linux/cpu_cooling.h> > > +#define MAX_TRIP 5 > + Should MAX_TRIP/THRESHOLD_LEVEL/PANIC_ZONE be somewhat same > enum calibration_type { > TYPE_ONE_POINT_TRIMMING, > TYPE_TWO_POINT_TRIMMING, > @@ -100,11 +102,12 @@ struct freq_clip_table { > struct exynos_tmu_platform_data { > u8 threshold; > u8 threshold_falling; > - u8 trigger_levels[4]; > + u8 trigger_levels[MAX_TRIP]; > bool trigger_level0_en; > bool trigger_level1_en; > bool trigger_level2_en; > bool trigger_level3_en; > + bool trigger_level4_en; > > u8 gain; > u8 reference_voltage; > @@ -113,7 +116,7 @@ struct exynos_tmu_platform_data { > > enum calibration_type cal_type; > enum soc_type type; > - struct freq_clip_table freq_tab[4]; > + struct freq_clip_table freq_tab[MAX_TRIP]; > unsigned int freq_tab_count; > }; > #endif /* _LINUX_EXYNOS_THERMAL_H */ > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Eduardo, On Fri, Apr 12, 2013 at 2:18 AM, Eduardo Valentin <eduardo.valentin@ti.com> wrote: > On 26-03-2013 07:33, Amit Daniel Kachhap wrote: >> >> This code changes the zone handling to use the trip count passed >> by the TMU driver. This also helps in adding more zone support. >> >> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> >> >> --- >> drivers/thermal/samsung/exynos_common.c | 56 >> +++++++++++++------------ >> drivers/thermal/samsung/exynos_common.h | 13 +++--- >> include/linux/platform_data/exynos_thermal.h | 7 ++- >> 3 files changed, 40 insertions(+), 36 deletions(-) >> >> diff --git a/drivers/thermal/samsung/exynos_common.c >> b/drivers/thermal/samsung/exynos_common.c >> index 649d67c..0c0098d 100644 >> --- a/drivers/thermal/samsung/exynos_common.c >> +++ b/drivers/thermal/samsung/exynos_common.c >> @@ -84,17 +84,16 @@ static int exynos_set_mode(struct thermal_zone_device >> *thermal, >> static int exynos_get_trip_type(struct thermal_zone_device *thermal, int >> trip, >> enum thermal_trip_type *type) >> { >> - switch (GET_ZONE(trip)) { >> - case MONITOR_ZONE: >> - case WARN_ZONE: >> - *type = THERMAL_TRIP_ACTIVE; >> - break; >> - case PANIC_ZONE: >> - *type = THERMAL_TRIP_CRITICAL; >> - break; >> - default: >> + struct exynos_thermal_zone *th_zone = thermal->devdata; >> + int max_trip = th_zone->sensor_conf->trip_data.trip_count; >> + >> + if (trip < 0 || trip >= max_trip) >> return -EINVAL; >> - } >> + else if (trip == (max_trip - 1)) >> + *type = THERMAL_TRIP_CRITICAL; >> + else >> + *type = THERMAL_TRIP_ACTIVE; >> + >> return 0; >> } >> >> @@ -103,8 +102,9 @@ static int exynos_get_trip_temp(struct >> thermal_zone_device *thermal, int trip, >> unsigned long *temp) >> { >> struct exynos_thermal_zone *th_zone = thermal->devdata; >> + int max_trip = th_zone->sensor_conf->trip_data.trip_count; >> >> - if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE)) >> + if (trip < 0 || trip >= max_trip) >> return -EINVAL; >> >> *temp = th_zone->sensor_conf->trip_data.trip_val[trip]; >> @@ -118,10 +118,10 @@ static int exynos_get_trip_temp(struct >> thermal_zone_device *thermal, int trip, >> static int exynos_get_crit_temp(struct thermal_zone_device *thermal, >> unsigned long *temp) >> { >> - int ret; >> - /* Panic zone */ >> - ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp); >> - return ret; >> + struct exynos_thermal_zone *th_zone = thermal->devdata; >> + int max_trip = th_zone->sensor_conf->trip_data.trip_count; >> + /* Get the temp of highest trip*/ >> + return exynos_get_trip_temp(thermal, max_trip - 1, temp); >> } >> >> int exynos_get_frequency_level(unsigned int cpu, unsigned int freq) >> @@ -157,7 +157,7 @@ static int exynos_bind(struct thermal_zone_device >> *thermal, >> tab_size = data->cooling_data.freq_clip_count; >> >> if (tab_ptr == NULL || tab_size == 0) >> - return -EINVAL; >> + return 0; >> >> /* find the cooling device registered*/ >> for (i = 0; i < th_zone->cool_dev_size; i++) >> @@ -206,7 +206,7 @@ static int exynos_unbind(struct thermal_zone_device >> *thermal, >> tab_size = data->cooling_data.freq_clip_count; >> >> if (tab_size == 0) >> - return -EINVAL; >> + return 0; >> >> /* find the cooling device registered*/ >> for (i = 0; i < th_zone->cool_dev_size; i++) > > > The above two chunks are confusing. I dont understand how they are now > supposed to be valid settings. Well it is made valid when there is no cooling table registered and hence no cooling. > > >> @@ -366,19 +366,21 @@ int exynos_register_thermal(struct >> thermal_sensor_conf *sensor_conf) >> return -ENOMEM; >> >> th_zone->sensor_conf = sensor_conf; >> - cpumask_set_cpu(0, &mask_val); >> - th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val); >> - if (IS_ERR(th_zone->cool_dev[0])) { >> - pr_err("Failed to register cpufreq cooling device\n"); >> - ret = -EINVAL; >> - goto err_unregister; >> + if (sensor_conf->cooling_data.freq_clip_count > 0) { >> + cpumask_set_cpu(0, &mask_val); >> + th_zone->cool_dev[0] = >> cpufreq_cooling_register(&mask_val); >> + if (IS_ERR(th_zone->cool_dev[0])) { >> + pr_err("Failed to register cpufreq cooling >> device\n"); >> + ret = -EINVAL; >> + goto err_unregister; >> + } >> + th_zone->cool_dev_size++; >> } >> - th_zone->cool_dev_size++; >> >> th_zone->therm_dev = >> thermal_zone_device_register(sensor_conf->name, >> - EXYNOS_ZONE_COUNT, 0, th_zone, &exynos_dev_ops, >> NULL, 0, >> - sensor_conf->trip_data.trigger_falling ? >> - 0 : IDLE_INTERVAL); >> + sensor_conf->trip_data.trip_count, 0, th_zone, >> &exynos_dev_ops, >> + NULL, 0, sensor_conf->trip_data.trigger_falling ? >> + 0 : IDLE_INTERVAL); >> >> if (IS_ERR(th_zone->therm_dev)) { >> pr_err("Failed to register thermal zone device\n"); >> diff --git a/drivers/thermal/samsung/exynos_common.h >> b/drivers/thermal/samsung/exynos_common.h >> index b8d289e..453e09a 100644 >> --- a/drivers/thermal/samsung/exynos_common.h >> +++ b/drivers/thermal/samsung/exynos_common.h >> @@ -27,23 +27,22 @@ >> #define SENSOR_NAME_LEN 16 >> #define MAX_TRIP_COUNT 8 >> #define MAX_COOLING_DEVICE 4 >> -#define MAX_THRESHOLD_LEVS 4 >> +#define MAX_THRESHOLD_LEVS 5 >> >> #define ACTIVE_INTERVAL 500 >> #define IDLE_INTERVAL 10000 >> #define MCELSIUS 1000 >> >> /* CPU Zone information */ >> -#define PANIC_ZONE 4 >> -#define WARN_ZONE 3 >> -#define MONITOR_ZONE 2 >> -#define SAFE_ZONE 1 >> +#define PANIC_ZONE 5 >> +#define ALARM_ZONE 4 >> +#define WARN_ZONE 3 >> +#define MONITOR_ZONE 2 >> +#define SAFE_ZONE 1 >> > > > Updating this does not seam to be part of the intent of this patch. You > probably want to send a separate patch for this. yes right. > > >> #define GET_ZONE(trip) (trip + 2) >> #define GET_TRIP(zone) (zone - 2) >> >> -#define EXYNOS_ZONE_COUNT 3 >> - >> struct thermal_trip_point_conf { >> int trip_val[MAX_TRIP_COUNT]; >> int trip_count; >> diff --git a/include/linux/platform_data/exynos_thermal.h >> b/include/linux/platform_data/exynos_thermal.h >> index da7e627..893b758 100644 >> --- a/include/linux/platform_data/exynos_thermal.h >> +++ b/include/linux/platform_data/exynos_thermal.h >> @@ -23,6 +23,8 @@ >> #define _LINUX_EXYNOS_THERMAL_H >> #include <linux/cpu_cooling.h> >> >> +#define MAX_TRIP 5 >> + > > > > Should MAX_TRIP/THRESHOLD_LEVEL/PANIC_ZONE be somewhat same Yes they can be removed. > > >> enum calibration_type { >> TYPE_ONE_POINT_TRIMMING, >> TYPE_TWO_POINT_TRIMMING, >> @@ -100,11 +102,12 @@ struct freq_clip_table { >> struct exynos_tmu_platform_data { >> u8 threshold; >> u8 threshold_falling; >> - u8 trigger_levels[4]; >> + u8 trigger_levels[MAX_TRIP]; >> bool trigger_level0_en; >> bool trigger_level1_en; >> bool trigger_level2_en; >> bool trigger_level3_en; >> + bool trigger_level4_en; >> >> u8 gain; >> u8 reference_voltage; >> @@ -113,7 +116,7 @@ struct exynos_tmu_platform_data { >> >> enum calibration_type cal_type; >> enum soc_type type; >> - struct freq_clip_table freq_tab[4]; >> + struct freq_clip_table freq_tab[MAX_TRIP]; >> unsigned int freq_tab_count; >> }; >> #endif /* _LINUX_EXYNOS_THERMAL_H */ >> > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 12-04-2013 07:16, amit daniel kachhap wrote: > Hi Eduardo, > > On Fri, Apr 12, 2013 at 2:18 AM, Eduardo Valentin > <eduardo.valentin@ti.com> wrote: >> On 26-03-2013 07:33, Amit Daniel Kachhap wrote: >>> >>> This code changes the zone handling to use the trip count passed >>> by the TMU driver. This also helps in adding more zone support. >>> >>> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> >>> >>> --- >>> drivers/thermal/samsung/exynos_common.c | 56 >>> +++++++++++++------------ >>> drivers/thermal/samsung/exynos_common.h | 13 +++--- >>> include/linux/platform_data/exynos_thermal.h | 7 ++- >>> 3 files changed, 40 insertions(+), 36 deletions(-) >>> >>> diff --git a/drivers/thermal/samsung/exynos_common.c >>> b/drivers/thermal/samsung/exynos_common.c >>> index 649d67c..0c0098d 100644 >>> --- a/drivers/thermal/samsung/exynos_common.c >>> +++ b/drivers/thermal/samsung/exynos_common.c >>> @@ -84,17 +84,16 @@ static int exynos_set_mode(struct thermal_zone_device >>> *thermal, >>> static int exynos_get_trip_type(struct thermal_zone_device *thermal, int >>> trip, >>> enum thermal_trip_type *type) >>> { >>> - switch (GET_ZONE(trip)) { >>> - case MONITOR_ZONE: >>> - case WARN_ZONE: >>> - *type = THERMAL_TRIP_ACTIVE; >>> - break; >>> - case PANIC_ZONE: >>> - *type = THERMAL_TRIP_CRITICAL; >>> - break; >>> - default: >>> + struct exynos_thermal_zone *th_zone = thermal->devdata; >>> + int max_trip = th_zone->sensor_conf->trip_data.trip_count; >>> + >>> + if (trip < 0 || trip >= max_trip) >>> return -EINVAL; >>> - } >>> + else if (trip == (max_trip - 1)) >>> + *type = THERMAL_TRIP_CRITICAL; >>> + else >>> + *type = THERMAL_TRIP_ACTIVE; >>> + >>> return 0; >>> } >>> >>> @@ -103,8 +102,9 @@ static int exynos_get_trip_temp(struct >>> thermal_zone_device *thermal, int trip, >>> unsigned long *temp) >>> { >>> struct exynos_thermal_zone *th_zone = thermal->devdata; >>> + int max_trip = th_zone->sensor_conf->trip_data.trip_count; >>> >>> - if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE)) >>> + if (trip < 0 || trip >= max_trip) >>> return -EINVAL; >>> >>> *temp = th_zone->sensor_conf->trip_data.trip_val[trip]; >>> @@ -118,10 +118,10 @@ static int exynos_get_trip_temp(struct >>> thermal_zone_device *thermal, int trip, >>> static int exynos_get_crit_temp(struct thermal_zone_device *thermal, >>> unsigned long *temp) >>> { >>> - int ret; >>> - /* Panic zone */ >>> - ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp); >>> - return ret; >>> + struct exynos_thermal_zone *th_zone = thermal->devdata; >>> + int max_trip = th_zone->sensor_conf->trip_data.trip_count; >>> + /* Get the temp of highest trip*/ >>> + return exynos_get_trip_temp(thermal, max_trip - 1, temp); >>> } >>> >>> int exynos_get_frequency_level(unsigned int cpu, unsigned int freq) >>> @@ -157,7 +157,7 @@ static int exynos_bind(struct thermal_zone_device >>> *thermal, >>> tab_size = data->cooling_data.freq_clip_count; >>> >>> if (tab_ptr == NULL || tab_size == 0) >>> - return -EINVAL; >>> + return 0; >>> >>> /* find the cooling device registered*/ >>> for (i = 0; i < th_zone->cool_dev_size; i++) >>> @@ -206,7 +206,7 @@ static int exynos_unbind(struct thermal_zone_device >>> *thermal, >>> tab_size = data->cooling_data.freq_clip_count; >>> >>> if (tab_size == 0) >>> - return -EINVAL; >>> + return 0; >>> >>> /* find the cooling device registered*/ >>> for (i = 0; i < th_zone->cool_dev_size; i++) >> >> >> The above two chunks are confusing. I dont understand how they are now >> supposed to be valid settings. > Well it is made valid when there is no cooling table registered and > hence no cooling. I suppose that is the case when you have sensors covering domains different of your CPU domain, where you cool off using cpufreq (table), right? I suggest you adding a comment explaining why this is now valid.. >> >> >>> @@ -366,19 +366,21 @@ int exynos_register_thermal(struct >>> thermal_sensor_conf *sensor_conf) >>> return -ENOMEM; >>> >>> th_zone->sensor_conf = sensor_conf; >>> - cpumask_set_cpu(0, &mask_val); >>> - th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val); >>> - if (IS_ERR(th_zone->cool_dev[0])) { >>> - pr_err("Failed to register cpufreq cooling device\n"); >>> - ret = -EINVAL; >>> - goto err_unregister; >>> + if (sensor_conf->cooling_data.freq_clip_count > 0) { >>> + cpumask_set_cpu(0, &mask_val); >>> + th_zone->cool_dev[0] = >>> cpufreq_cooling_register(&mask_val); >>> + if (IS_ERR(th_zone->cool_dev[0])) { >>> + pr_err("Failed to register cpufreq cooling >>> device\n"); >>> + ret = -EINVAL; >>> + goto err_unregister; >>> + } >>> + th_zone->cool_dev_size++; >>> } >>> - th_zone->cool_dev_size++; >>> >>> th_zone->therm_dev = >>> thermal_zone_device_register(sensor_conf->name, >>> - EXYNOS_ZONE_COUNT, 0, th_zone, &exynos_dev_ops, >>> NULL, 0, >>> - sensor_conf->trip_data.trigger_falling ? >>> - 0 : IDLE_INTERVAL); >>> + sensor_conf->trip_data.trip_count, 0, th_zone, >>> &exynos_dev_ops, >>> + NULL, 0, sensor_conf->trip_data.trigger_falling ? >>> + 0 : IDLE_INTERVAL); >>> >>> if (IS_ERR(th_zone->therm_dev)) { >>> pr_err("Failed to register thermal zone device\n"); >>> diff --git a/drivers/thermal/samsung/exynos_common.h >>> b/drivers/thermal/samsung/exynos_common.h >>> index b8d289e..453e09a 100644 >>> --- a/drivers/thermal/samsung/exynos_common.h >>> +++ b/drivers/thermal/samsung/exynos_common.h >>> @@ -27,23 +27,22 @@ >>> #define SENSOR_NAME_LEN 16 >>> #define MAX_TRIP_COUNT 8 >>> #define MAX_COOLING_DEVICE 4 >>> -#define MAX_THRESHOLD_LEVS 4 >>> +#define MAX_THRESHOLD_LEVS 5 >>> >>> #define ACTIVE_INTERVAL 500 >>> #define IDLE_INTERVAL 10000 >>> #define MCELSIUS 1000 >>> >>> /* CPU Zone information */ >>> -#define PANIC_ZONE 4 >>> -#define WARN_ZONE 3 >>> -#define MONITOR_ZONE 2 >>> -#define SAFE_ZONE 1 >>> +#define PANIC_ZONE 5 >>> +#define ALARM_ZONE 4 >>> +#define WARN_ZONE 3 >>> +#define MONITOR_ZONE 2 >>> +#define SAFE_ZONE 1 >>> >> >> >> Updating this does not seam to be part of the intent of this patch. You >> probably want to send a separate patch for this. > yes right. >> >> >>> #define GET_ZONE(trip) (trip + 2) >>> #define GET_TRIP(zone) (zone - 2) >>> >>> -#define EXYNOS_ZONE_COUNT 3 >>> - >>> struct thermal_trip_point_conf { >>> int trip_val[MAX_TRIP_COUNT]; >>> int trip_count; >>> diff --git a/include/linux/platform_data/exynos_thermal.h >>> b/include/linux/platform_data/exynos_thermal.h >>> index da7e627..893b758 100644 >>> --- a/include/linux/platform_data/exynos_thermal.h >>> +++ b/include/linux/platform_data/exynos_thermal.h >>> @@ -23,6 +23,8 @@ >>> #define _LINUX_EXYNOS_THERMAL_H >>> #include <linux/cpu_cooling.h> >>> >>> +#define MAX_TRIP 5 >>> + >> >> >> >> Should MAX_TRIP/THRESHOLD_LEVEL/PANIC_ZONE be somewhat same > Yes they can be removed. >> >> >>> enum calibration_type { >>> TYPE_ONE_POINT_TRIMMING, >>> TYPE_TWO_POINT_TRIMMING, >>> @@ -100,11 +102,12 @@ struct freq_clip_table { >>> struct exynos_tmu_platform_data { >>> u8 threshold; >>> u8 threshold_falling; >>> - u8 trigger_levels[4]; >>> + u8 trigger_levels[MAX_TRIP]; >>> bool trigger_level0_en; >>> bool trigger_level1_en; >>> bool trigger_level2_en; >>> bool trigger_level3_en; >>> + bool trigger_level4_en; >>> >>> u8 gain; >>> u8 reference_voltage; >>> @@ -113,7 +116,7 @@ struct exynos_tmu_platform_data { >>> >>> enum calibration_type cal_type; >>> enum soc_type type; >>> - struct freq_clip_table freq_tab[4]; >>> + struct freq_clip_table freq_tab[MAX_TRIP]; >>> unsigned int freq_tab_count; >>> }; >>> #endif /* _LINUX_EXYNOS_THERMAL_H */ >>> >> > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/thermal/samsung/exynos_common.c b/drivers/thermal/samsung/exynos_common.c index 649d67c..0c0098d 100644 --- a/drivers/thermal/samsung/exynos_common.c +++ b/drivers/thermal/samsung/exynos_common.c @@ -84,17 +84,16 @@ static int exynos_set_mode(struct thermal_zone_device *thermal, static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip, enum thermal_trip_type *type) { - switch (GET_ZONE(trip)) { - case MONITOR_ZONE: - case WARN_ZONE: - *type = THERMAL_TRIP_ACTIVE; - break; - case PANIC_ZONE: - *type = THERMAL_TRIP_CRITICAL; - break; - default: + struct exynos_thermal_zone *th_zone = thermal->devdata; + int max_trip = th_zone->sensor_conf->trip_data.trip_count; + + if (trip < 0 || trip >= max_trip) return -EINVAL; - } + else if (trip == (max_trip - 1)) + *type = THERMAL_TRIP_CRITICAL; + else + *type = THERMAL_TRIP_ACTIVE; + return 0; } @@ -103,8 +102,9 @@ static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip, unsigned long *temp) { struct exynos_thermal_zone *th_zone = thermal->devdata; + int max_trip = th_zone->sensor_conf->trip_data.trip_count; - if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE)) + if (trip < 0 || trip >= max_trip) return -EINVAL; *temp = th_zone->sensor_conf->trip_data.trip_val[trip]; @@ -118,10 +118,10 @@ static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip, static int exynos_get_crit_temp(struct thermal_zone_device *thermal, unsigned long *temp) { - int ret; - /* Panic zone */ - ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp); - return ret; + struct exynos_thermal_zone *th_zone = thermal->devdata; + int max_trip = th_zone->sensor_conf->trip_data.trip_count; + /* Get the temp of highest trip*/ + return exynos_get_trip_temp(thermal, max_trip - 1, temp); } int exynos_get_frequency_level(unsigned int cpu, unsigned int freq) @@ -157,7 +157,7 @@ static int exynos_bind(struct thermal_zone_device *thermal, tab_size = data->cooling_data.freq_clip_count; if (tab_ptr == NULL || tab_size == 0) - return -EINVAL; + return 0; /* find the cooling device registered*/ for (i = 0; i < th_zone->cool_dev_size; i++) @@ -206,7 +206,7 @@ static int exynos_unbind(struct thermal_zone_device *thermal, tab_size = data->cooling_data.freq_clip_count; if (tab_size == 0) - return -EINVAL; + return 0; /* find the cooling device registered*/ for (i = 0; i < th_zone->cool_dev_size; i++) @@ -366,19 +366,21 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) return -ENOMEM; th_zone->sensor_conf = sensor_conf; - cpumask_set_cpu(0, &mask_val); - th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val); - if (IS_ERR(th_zone->cool_dev[0])) { - pr_err("Failed to register cpufreq cooling device\n"); - ret = -EINVAL; - goto err_unregister; + if (sensor_conf->cooling_data.freq_clip_count > 0) { + cpumask_set_cpu(0, &mask_val); + th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val); + if (IS_ERR(th_zone->cool_dev[0])) { + pr_err("Failed to register cpufreq cooling device\n"); + ret = -EINVAL; + goto err_unregister; + } + th_zone->cool_dev_size++; } - th_zone->cool_dev_size++; th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name, - EXYNOS_ZONE_COUNT, 0, th_zone, &exynos_dev_ops, NULL, 0, - sensor_conf->trip_data.trigger_falling ? - 0 : IDLE_INTERVAL); + sensor_conf->trip_data.trip_count, 0, th_zone, &exynos_dev_ops, + NULL, 0, sensor_conf->trip_data.trigger_falling ? + 0 : IDLE_INTERVAL); if (IS_ERR(th_zone->therm_dev)) { pr_err("Failed to register thermal zone device\n"); diff --git a/drivers/thermal/samsung/exynos_common.h b/drivers/thermal/samsung/exynos_common.h index b8d289e..453e09a 100644 --- a/drivers/thermal/samsung/exynos_common.h +++ b/drivers/thermal/samsung/exynos_common.h @@ -27,23 +27,22 @@ #define SENSOR_NAME_LEN 16 #define MAX_TRIP_COUNT 8 #define MAX_COOLING_DEVICE 4 -#define MAX_THRESHOLD_LEVS 4 +#define MAX_THRESHOLD_LEVS 5 #define ACTIVE_INTERVAL 500 #define IDLE_INTERVAL 10000 #define MCELSIUS 1000 /* CPU Zone information */ -#define PANIC_ZONE 4 -#define WARN_ZONE 3 -#define MONITOR_ZONE 2 -#define SAFE_ZONE 1 +#define PANIC_ZONE 5 +#define ALARM_ZONE 4 +#define WARN_ZONE 3 +#define MONITOR_ZONE 2 +#define SAFE_ZONE 1 #define GET_ZONE(trip) (trip + 2) #define GET_TRIP(zone) (zone - 2) -#define EXYNOS_ZONE_COUNT 3 - struct thermal_trip_point_conf { int trip_val[MAX_TRIP_COUNT]; int trip_count; diff --git a/include/linux/platform_data/exynos_thermal.h b/include/linux/platform_data/exynos_thermal.h index da7e627..893b758 100644 --- a/include/linux/platform_data/exynos_thermal.h +++ b/include/linux/platform_data/exynos_thermal.h @@ -23,6 +23,8 @@ #define _LINUX_EXYNOS_THERMAL_H #include <linux/cpu_cooling.h> +#define MAX_TRIP 5 + enum calibration_type { TYPE_ONE_POINT_TRIMMING, TYPE_TWO_POINT_TRIMMING, @@ -100,11 +102,12 @@ struct freq_clip_table { struct exynos_tmu_platform_data { u8 threshold; u8 threshold_falling; - u8 trigger_levels[4]; + u8 trigger_levels[MAX_TRIP]; bool trigger_level0_en; bool trigger_level1_en; bool trigger_level2_en; bool trigger_level3_en; + bool trigger_level4_en; u8 gain; u8 reference_voltage; @@ -113,7 +116,7 @@ struct exynos_tmu_platform_data { enum calibration_type cal_type; enum soc_type type; - struct freq_clip_table freq_tab[4]; + struct freq_clip_table freq_tab[MAX_TRIP]; unsigned int freq_tab_count; }; #endif /* _LINUX_EXYNOS_THERMAL_H */
This code changes the zone handling to use the trip count passed by the TMU driver. This also helps in adding more zone support. Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> --- drivers/thermal/samsung/exynos_common.c | 56 +++++++++++++------------ drivers/thermal/samsung/exynos_common.h | 13 +++--- include/linux/platform_data/exynos_thermal.h | 7 ++- 3 files changed, 40 insertions(+), 36 deletions(-)