| Message ID | 1364308196-10101-1-git-send-email-prasanna.ps@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Mar 26, 2013 at 07:59:56PM +0530, Prasanna Kumar wrote: > From: Jaemin Yoo <jmin.yoo@samsung.com> > > SMBus read and write are supported by the emulation layer of i2c > framework if the controller doesn't have SMBus features. > > I2C_M_RECV_LEN flag is used to let i2c drivers know rx length is not > yet determined but will be read to the first byte in rx buffer. > > s3c2410 doesn't handle this flag. So only one byte is read from slave. > There fore following two features are added to the driver code. > > 1. skip rx length check if I2C_M_RECV_LEN is set and the length is 1. > 2. add actual bytes to the rx length after reading first bytes if > I2C_M_RECV_LEN. > > I2C_M_RECV_LEN is only set for SMBus command. So this code does not > affect legacy codes which only use i2c command for s3c2410. > > Signed-off-by: Jaemin Yoo <jmin.yoo@samsung.com> > Tested-by: Prasanna Kumar <prasanna.ps@samsung.com> Applied to for-next, thanks! -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello, On Tue, Mar 26, 2013 at 07:59:56PM +0530, Prasanna Kumar wrote: > diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c > index 17c5c37..e4ab9ea 100644 > --- a/drivers/i2c/busses/i2c-s3c2410.c > +++ b/drivers/i2c/busses/i2c-s3c2410.c > @@ -309,6 +309,12 @@ static inline int is_lastmsg(struct s3c24xx_i2c *i2c) > > static inline int is_msglast(struct s3c24xx_i2c *i2c) > { > + /* msg->len is always 1 for the first byte of smbus block read. > + * Actual length will be read from slave. More bytes will be > + * read according to the length then. */ > + if (i2c->msg->flags & I2C_M_RECV_LEN && i2c->msg->len == 1) > + return 0; > + > return i2c->msg_ptr == i2c->msg->len-1; > } > > @@ -448,6 +454,9 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) > byte = readb(i2c->regs + S3C2410_IICDS); > i2c->msg->buf[i2c->msg_ptr++] = byte; > > + /* Add actual length to read for smbus block read */ > + if (i2c->msg->flags & I2C_M_RECV_LEN && i2c->msg->len == 1) > + i2c->msg->len += byte; > prepare_read: > if (is_msglast(i2c)) { I don't know if that can happen, but if the block has length 0 (that is, only consists of a single byte that is read as 0) the is_msglast() test returns 0 which might be wrong. Maybe even if it cannot regularily happen handle it in a sane way? Also I wonder if error checking for byte > I2C_SMBUS_BLOCK_MAX would be needed to prevent a buffer overrun? Best regards Uwe
> I don't know if that can happen, but if the block has length 0 (that is, > only consists of a single byte that is read as 0) the is_msglast() test > returns 0 which might be wrong. Maybe even if it cannot regularily > happen handle it in a sane way? Length of 0 is illegal according to the specs, but a check won't hurt. > Also I wonder if error checking for byte > I2C_SMBUS_BLOCK_MAX would be > needed to prevent a buffer overrun? Yes. Although I have seen devices able to send more than that, yet adding support for that is a seperate issue. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 17c5c37..e4ab9ea 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -309,6 +309,12 @@ static inline int is_lastmsg(struct s3c24xx_i2c *i2c) static inline int is_msglast(struct s3c24xx_i2c *i2c) { + /* msg->len is always 1 for the first byte of smbus block read. + * Actual length will be read from slave. More bytes will be + * read according to the length then. */ + if (i2c->msg->flags & I2C_M_RECV_LEN && i2c->msg->len == 1) + return 0; + return i2c->msg_ptr == i2c->msg->len-1; } @@ -448,6 +454,9 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) byte = readb(i2c->regs + S3C2410_IICDS); i2c->msg->buf[i2c->msg_ptr++] = byte; + /* Add actual length to read for smbus block read */ + if (i2c->msg->flags & I2C_M_RECV_LEN && i2c->msg->len == 1) + i2c->msg->len += byte; prepare_read: if (is_msglast(i2c)) { /* last byte of buffer */