| Message ID | 1367489937-30725-1-git-send-email-amit.daniel@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 02-05-2013 06:18, Amit Daniel Kachhap wrote: > TMU probe function now checks for a device tree defined regulator. > For compatibility reasons it is allowed to probe driver even without > this regulator defined. > > Signed-off-by: Luk asz Majewski <l.majewski@samsung.com> > Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> > Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> I assume this one got superseeded by the same patch on your 30 patch series, right? https://patchwork.kernel.org/patch/2731031/ > --- > > Changes in V2: > * Added log message in regulator_get failure as suggested by Sylwester. > * Used IS_ERR for checking regulator pointer as suggested by Sylwester. > > This patch is repost of the patch posted by Lukasz Majewski > (https://patchwork.kernel.org/patch/2488211/). I have rebased this > patch on top of my TMU re-structured patch series > (http://lwn.net/Articles/548634/). Although I thought of handling > regulator as one type of feature (newly added) but could not do > so as regulator is a board/platform property and not SOC property so > leaving the device tree to define and handle it. > > .../devicetree/bindings/thermal/exynos-thermal.txt | 4 ++++ > drivers/thermal/samsung/exynos_tmu.c | 19 +++++++++++++++++++ > 2 files changed, 23 insertions(+), 0 deletions(-) > > diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt > index 970eeba..ff62f7a 100644 > --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt > +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt > @@ -14,6 +14,9 @@ > - interrupts : Should contain interrupt for thermal system > - clocks : The main clock for TMU device > - clock-names : Thermal system clock name > +- vtmu-supply: This entry is optional and provides the regulator node supplying > + voltage to TMU. If needed this entry can be placed inside > + board/platform specific dts file. > > Example 1): > > @@ -25,6 +28,7 @@ Example 1): > clocks = <&clock 383>; > clock-names = "tmu_apbif"; > status = "disabled"; > + vtmu-supply = <&tmu_regulator_node>; > }; > > Example 2): > diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c > index 72446c9..b7c609a 100644 > --- a/drivers/thermal/samsung/exynos_tmu.c > +++ b/drivers/thermal/samsung/exynos_tmu.c > @@ -32,6 +32,7 @@ > #include <linux/of_address.h> > #include <linux/of_irq.h> > #include <linux/platform_device.h> > +#include <linux/regulator/consumer.h> > #include <linux/slab.h> > #include <linux/workqueue.h> > #include "exynos_thermal_common.h" > @@ -52,6 +53,7 @@ > * @clk: pointer to the clock structure. > * @temp_error1: fused value of the first point trim. > * @temp_error2: fused value of the second point trim. > + * @regulator: pointer to the TMU regulator structure. > * @reg_conf: pointer to structure to register with core thermal. > */ > struct exynos_tmu_data { > @@ -65,6 +67,7 @@ struct exynos_tmu_data { > struct mutex lock; > struct clk *clk; > u8 temp_error1, temp_error2; > + struct regulator *regulator; > struct thermal_sensor_conf *reg_conf; > }; > > @@ -501,10 +504,23 @@ static int exynos_map_dt_data(struct platform_device *pdev) > struct exynos_tmu_data *data = platform_get_drvdata(pdev); > struct exynos_tmu_platform_data *pdata = data->pdata; > struct resource res; > + int ret; > > if (!data) > return -ENODEV; > > + /* Try enabling the regulator if found */ > + data->regulator = devm_regulator_get(&pdev->dev, "vtmu"); > + if (!IS_ERR(data->regulator)) { > + ret = regulator_enable(data->regulator); > + if (ret) { > + dev_err(&pdev->dev, "failed to enable vtmu\n"); > + return ret; > + } > + } else { > + dev_info(&pdev->dev, "Regulator node (vtmu) not found\n"); > + } > + > data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl"); > if (data->id < 0) > data->id = 0; > @@ -669,6 +685,9 @@ static int exynos_tmu_remove(struct platform_device *pdev) > > clk_unprepare(data->clk); > > + if (!IS_ERR(data->regulator)) > + regulator_disable(data->regulator); > + > platform_set_drvdata(pdev, NULL); > > return 0; >
On Thu, Jun 20, 2013 at 1:33 AM, Eduardo Valentin <eduardo.valentin@ti.com> wrote: > On 02-05-2013 06:18, Amit Daniel Kachhap wrote: >> TMU probe function now checks for a device tree defined regulator. >> For compatibility reasons it is allowed to probe driver even without >> this regulator defined. >> >> Signed-off-by: Luk asz Majewski <l.majewski@samsung.com> >> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> >> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> > > I assume this one got superseeded by the same patch on your 30 patch > series, right? > https://patchwork.kernel.org/patch/2731031/ Yes right. In my re-structuring patch series this one is included. > > >> --- >> >> Changes in V2: >> * Added log message in regulator_get failure as suggested by Sylwester. >> * Used IS_ERR for checking regulator pointer as suggested by Sylwester. >> >> This patch is repost of the patch posted by Lukasz Majewski >> (https://patchwork.kernel.org/patch/2488211/). I have rebased this >> patch on top of my TMU re-structured patch series >> (http://lwn.net/Articles/548634/). Although I thought of handling >> regulator as one type of feature (newly added) but could not do >> so as regulator is a board/platform property and not SOC property so >> leaving the device tree to define and handle it. >> >> .../devicetree/bindings/thermal/exynos-thermal.txt | 4 ++++ >> drivers/thermal/samsung/exynos_tmu.c | 19 +++++++++++++++++++ >> 2 files changed, 23 insertions(+), 0 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt >> index 970eeba..ff62f7a 100644 >> --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt >> +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt >> @@ -14,6 +14,9 @@ >> - interrupts : Should contain interrupt for thermal system >> - clocks : The main clock for TMU device >> - clock-names : Thermal system clock name >> +- vtmu-supply: This entry is optional and provides the regulator node supplying >> + voltage to TMU. If needed this entry can be placed inside >> + board/platform specific dts file. >> >> Example 1): >> >> @@ -25,6 +28,7 @@ Example 1): >> clocks = <&clock 383>; >> clock-names = "tmu_apbif"; >> status = "disabled"; >> + vtmu-supply = <&tmu_regulator_node>; >> }; >> >> Example 2): >> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c >> index 72446c9..b7c609a 100644 >> --- a/drivers/thermal/samsung/exynos_tmu.c >> +++ b/drivers/thermal/samsung/exynos_tmu.c >> @@ -32,6 +32,7 @@ >> #include <linux/of_address.h> >> #include <linux/of_irq.h> >> #include <linux/platform_device.h> >> +#include <linux/regulator/consumer.h> >> #include <linux/slab.h> >> #include <linux/workqueue.h> >> #include "exynos_thermal_common.h" >> @@ -52,6 +53,7 @@ >> * @clk: pointer to the clock structure. >> * @temp_error1: fused value of the first point trim. >> * @temp_error2: fused value of the second point trim. >> + * @regulator: pointer to the TMU regulator structure. >> * @reg_conf: pointer to structure to register with core thermal. >> */ >> struct exynos_tmu_data { >> @@ -65,6 +67,7 @@ struct exynos_tmu_data { >> struct mutex lock; >> struct clk *clk; >> u8 temp_error1, temp_error2; >> + struct regulator *regulator; >> struct thermal_sensor_conf *reg_conf; >> }; >> >> @@ -501,10 +504,23 @@ static int exynos_map_dt_data(struct platform_device *pdev) >> struct exynos_tmu_data *data = platform_get_drvdata(pdev); >> struct exynos_tmu_platform_data *pdata = data->pdata; >> struct resource res; >> + int ret; >> >> if (!data) >> return -ENODEV; >> >> + /* Try enabling the regulator if found */ >> + data->regulator = devm_regulator_get(&pdev->dev, "vtmu"); >> + if (!IS_ERR(data->regulator)) { >> + ret = regulator_enable(data->regulator); >> + if (ret) { >> + dev_err(&pdev->dev, "failed to enable vtmu\n"); >> + return ret; >> + } >> + } else { >> + dev_info(&pdev->dev, "Regulator node (vtmu) not found\n"); >> + } >> + >> data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl"); >> if (data->id < 0) >> data->id = 0; >> @@ -669,6 +685,9 @@ static int exynos_tmu_remove(struct platform_device *pdev) >> >> clk_unprepare(data->clk); >> >> + if (!IS_ERR(data->regulator)) >> + regulator_disable(data->regulator); >> + >> platform_set_drvdata(pdev, NULL); >> >> return 0; >> > > > -- > You have got to be excited about what you are doing. (L. Lamport) > > Eduardo Valentin > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt index 970eeba..ff62f7a 100644 --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt @@ -14,6 +14,9 @@ - interrupts : Should contain interrupt for thermal system - clocks : The main clock for TMU device - clock-names : Thermal system clock name +- vtmu-supply: This entry is optional and provides the regulator node supplying + voltage to TMU. If needed this entry can be placed inside + board/platform specific dts file. Example 1): @@ -25,6 +28,7 @@ Example 1): clocks = <&clock 383>; clock-names = "tmu_apbif"; status = "disabled"; + vtmu-supply = <&tmu_regulator_node>; }; Example 2): diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 72446c9..b7c609a 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -32,6 +32,7 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/platform_device.h> +#include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/workqueue.h> #include "exynos_thermal_common.h" @@ -52,6 +53,7 @@ * @clk: pointer to the clock structure. * @temp_error1: fused value of the first point trim. * @temp_error2: fused value of the second point trim. + * @regulator: pointer to the TMU regulator structure. * @reg_conf: pointer to structure to register with core thermal. */ struct exynos_tmu_data { @@ -65,6 +67,7 @@ struct exynos_tmu_data { struct mutex lock; struct clk *clk; u8 temp_error1, temp_error2; + struct regulator *regulator; struct thermal_sensor_conf *reg_conf; }; @@ -501,10 +504,23 @@ static int exynos_map_dt_data(struct platform_device *pdev) struct exynos_tmu_data *data = platform_get_drvdata(pdev); struct exynos_tmu_platform_data *pdata = data->pdata; struct resource res; + int ret; if (!data) return -ENODEV; + /* Try enabling the regulator if found */ + data->regulator = devm_regulator_get(&pdev->dev, "vtmu"); + if (!IS_ERR(data->regulator)) { + ret = regulator_enable(data->regulator); + if (ret) { + dev_err(&pdev->dev, "failed to enable vtmu\n"); + return ret; + } + } else { + dev_info(&pdev->dev, "Regulator node (vtmu) not found\n"); + } + data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl"); if (data->id < 0) data->id = 0; @@ -669,6 +685,9 @@ static int exynos_tmu_remove(struct platform_device *pdev) clk_unprepare(data->clk); + if (!IS_ERR(data->regulator)) + regulator_disable(data->regulator); + platform_set_drvdata(pdev, NULL); return 0;