diff mbox

[V3,14/21] thermal: exynos: Make the zone handling dependent on trip count

Message ID 1367931671-3906-15-git-send-email-amit.daniel@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Amit Kachhap May 7, 2013, 1:01 p.m. UTC 
This code simplifies the zone handling to use the trip count passed
by the TMU driver. This also helps in adding more zone support.

Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
---
 drivers/thermal/samsung/exynos_thermal_common.c |   55 ++++++++++++-----------
 drivers/thermal/samsung/exynos_thermal_common.h |    2 -
 2 files changed, 29 insertions(+), 28 deletions(-)
diff mbox

Patch

diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c
index b7ca8a4..b0dc63e 100644
--- a/drivers/thermal/samsung/exynos_thermal_common.c
+++ b/drivers/thermal/samsung/exynos_thermal_common.c
@@ -83,17 +83,16 @@  static int exynos_set_mode(struct thermal_zone_device *thermal,
 static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip,
 				 enum thermal_trip_type *type)
 {
-	switch (GET_ZONE(trip)) {
-	case MONITOR_ZONE:
-	case WARN_ZONE:
-		*type = THERMAL_TRIP_ACTIVE;
-		break;
-	case PANIC_ZONE:
-		*type = THERMAL_TRIP_CRITICAL;
-		break;
-	default:
+	struct exynos_thermal_zone *th_zone = thermal->devdata;
+	int max_trip = th_zone->sensor_conf->trip_data.trip_count;
+
+	if (trip < 0 || trip >= max_trip)
 		return -EINVAL;
-	}
+	else if (trip == (max_trip - 1))
+		*type = THERMAL_TRIP_CRITICAL;
+	else
+		*type = THERMAL_TRIP_ACTIVE;
+
 	return 0;
 }
 
@@ -102,8 +101,9 @@  static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
 				unsigned long *temp)
 {
 	struct exynos_thermal_zone *th_zone = thermal->devdata;
+	int max_trip = th_zone->sensor_conf->trip_data.trip_count;
 
-	if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
+	if (trip < 0 || trip >= max_trip)
 		return -EINVAL;
 
 	*temp = th_zone->sensor_conf->trip_data.trip_val[trip];
@@ -117,10 +117,10 @@  static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
 static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
 				unsigned long *temp)
 {
-	int ret;
-	/* Panic zone */
-	ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
-	return ret;
+	struct exynos_thermal_zone *th_zone = thermal->devdata;
+	int max_trip = th_zone->sensor_conf->trip_data.trip_count;
+	/* Get the temp of highest trip*/
+	return exynos_get_trip_temp(thermal, max_trip - 1, temp);
 }
 
 /* Bind callback functions for thermal zone */
@@ -345,19 +345,22 @@  int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
 		return -ENOMEM;
 
 	th_zone->sensor_conf = sensor_conf;
-	cpumask_set_cpu(0, &mask_val);
-	th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
-	if (IS_ERR(th_zone->cool_dev[0])) {
-		pr_err("Failed to register cpufreq cooling device\n");
-		ret = -EINVAL;
-		goto err_unregister;
+	if (sensor_conf->cooling_data.freq_clip_count > 0) {
+		cpumask_set_cpu(0, &mask_val);
+		th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
+		if (IS_ERR(th_zone->cool_dev[0])) {
+			pr_err("Failed to register cpufreq cooling device\n");
+			ret = -EINVAL;
+			goto err_unregister;
+		}
+		th_zone->cool_dev_size++;
 	}
-	th_zone->cool_dev_size++;
 
-	th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
-			EXYNOS_ZONE_COUNT, 0, th_zone, &exynos_dev_ops, NULL, 0,
-			sensor_conf->trip_data.trigger_falling ?
-			0 : IDLE_INTERVAL);
+	th_zone->therm_dev = thermal_zone_device_register(
+			sensor_conf->name, sensor_conf->trip_data.trip_count,
+			0, th_zone, &exynos_dev_ops, NULL, 0,
+			sensor_conf->trip_data.trigger_falling ? 0 :
+			IDLE_INTERVAL);
 
 	if (IS_ERR(th_zone->therm_dev)) {
 		pr_err("Failed to register thermal zone device\n");
diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
index 0acde95..1dd1b9e 100644
--- a/drivers/thermal/samsung/exynos_thermal_common.h
+++ b/drivers/thermal/samsung/exynos_thermal_common.h
@@ -42,8 +42,6 @@ 
 #define GET_ZONE(trip) (trip + 2)
 #define GET_TRIP(zone) (zone - 2)
 
-#define EXYNOS_ZONE_COUNT	3
-
 /**
  * struct freq_clip_table
  * @freq_clip_max: maximum frequency allowed for this cooling state.