| Message ID | 1370603235-11193-3-git-send-email-tushar.behera@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Friday 07 of June 2013 16:37:14 Tushar Behera wrote: > From: Sachin Kamat <sachin.kamat@linaro.org> > > Added FIMD and display timing node to Origen4210 board. > > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > Signed-off-by: Tushar Behera <tushar.behera@linaro.org> > --- > arch/arm/boot/dts/exynos4210-origen.dts | 21 +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > > diff --git a/arch/arm/boot/dts/exynos4210-origen.dts > b/arch/arm/boot/dts/exynos4210-origen.dts index bcf8079..4c6c3cd 100644 > --- a/arch/arm/boot/dts/exynos4210-origen.dts > +++ b/arch/arm/boot/dts/exynos4210-origen.dts > @@ -290,4 +290,25 @@ > clock-frequency = <24000000>; > }; > }; > + > + fimd@11c00000 { > + pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; Ahh, this would explain the two pwm pin groups from previous patch. This seems somehow incorrect, though. AFAIK PWM outputs are not managed by FIMD in any way. > + pinctrl-names = "default"; > + status = "okay"; > + }; > + > + display-timings { > + native-mode = <&timing0>; > + timing0: timing { > + clock-frequency = <50000>; Hmm, 50 KHz for pixel clock? Isn't it a bit too low? Or am I missing something? Best regards, Tomasz > + hactive = <1024>; > + vactive = <600>; > + hfront-porch = <64>; > + hback-porch = <16>; > + hsync-len = <48>; > + vback-porch = <64>; > + vfront-porch = <16>; > + vsync-len = <3>; > + }; > + }; > }; -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 06/08/2013 04:19 PM, Tomasz Figa wrote: > On Friday 07 of June 2013 16:37:14 Tushar Behera wrote: >> From: Sachin Kamat <sachin.kamat@linaro.org> >> >> Added FIMD and display timing node to Origen4210 board. >> >> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> >> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> >> --- >> arch/arm/boot/dts/exynos4210-origen.dts | 21 +++++++++++++++++++++ >> 1 file changed, 21 insertions(+) >> >> diff --git a/arch/arm/boot/dts/exynos4210-origen.dts >> b/arch/arm/boot/dts/exynos4210-origen.dts index bcf8079..4c6c3cd 100644 >> --- a/arch/arm/boot/dts/exynos4210-origen.dts >> +++ b/arch/arm/boot/dts/exynos4210-origen.dts >> @@ -290,4 +290,25 @@ >> clock-frequency = <24000000>; >> }; >> }; >> + >> + fimd@11c00000 { >> + pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; > > Ahh, this would explain the two pwm pin groups from previous patch. > > This seems somehow incorrect, though. AFAIK PWM outputs are not managed by > FIMD in any way. > I couldn't find any better place to put the pwm0_out pin configurations. Without configuring pwm0_out pins, display doesn't come up on the LCD. Any suggestions? >> + pinctrl-names = "default"; >> + status = "okay"; >> + }; >> + >> + display-timings { >> + native-mode = <&timing0>; >> + timing0: timing { >> + clock-frequency = <50000>; > > Hmm, 50 KHz for pixel clock? Isn't it a bit too low? Or am I missing > something? > Actually clock-frequency value is not used by DRM-FIMD, but instead required by the framework. Still it would be better to provide the actual pixel clock value here. So I would update this with 40MHz which is actual pixel clock used on my board. > Best regards, > Tomasz > >> + hactive = <1024>; >> + vactive = <600>; >> + hfront-porch = <64>; >> + hback-porch = <16>; >> + hsync-len = <48>; >> + vback-porch = <64>; >> + vfront-porch = <16>; >> + vsync-len = <3>; >> + }; >> + }; >> }; Thanks for your review.
On Monday 10 of June 2013 09:44:14 Tushar Behera wrote: > On 06/08/2013 04:19 PM, Tomasz Figa wrote: > > On Friday 07 of June 2013 16:37:14 Tushar Behera wrote: > >> From: Sachin Kamat <sachin.kamat@linaro.org> > >> > >> Added FIMD and display timing node to Origen4210 board. > >> > >> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > >> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> > >> --- > >> > >> arch/arm/boot/dts/exynos4210-origen.dts | 21 +++++++++++++++++++++ > >> 1 file changed, 21 insertions(+) > >> > >> diff --git a/arch/arm/boot/dts/exynos4210-origen.dts > >> b/arch/arm/boot/dts/exynos4210-origen.dts index bcf8079..4c6c3cd > >> 100644 > >> --- a/arch/arm/boot/dts/exynos4210-origen.dts > >> +++ b/arch/arm/boot/dts/exynos4210-origen.dts > >> @@ -290,4 +290,25 @@ > >> > >> clock-frequency = <24000000>; > >> > >> }; > >> > >> }; > >> > >> + > >> + fimd@11c00000 { > >> + pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; > > > > Ahh, this would explain the two pwm pin groups from previous patch. > > > > This seems somehow incorrect, though. AFAIK PWM outputs are not > > managed by FIMD in any way. > > I couldn't find any better place to put the pwm0_out pin configurations. > Without configuring pwm0_out pins, display doesn't come up on the LCD. > Any suggestions? Isn't there a PWM backlight driver? With my [PATCH 00/15] Final Samsung PWM support cleanup patches, a DT-compatible PWM driver is being added, so it should be possible to use it in your case. > >> + pinctrl-names = "default"; > >> + status = "okay"; > >> + }; > >> + > >> + display-timings { > >> + native-mode = <&timing0>; > >> + timing0: timing { > >> + clock-frequency = <50000>; > > > > Hmm, 50 KHz for pixel clock? Isn't it a bit too low? Or am I missing > > something? > > Actually clock-frequency value is not used by DRM-FIMD, but instead > required by the framework. > > Still it would be better to provide the actual pixel clock value here. > So I would update this with 40MHz which is actual pixel clock used on my > board. Yes, I think this is a much better idea. Thanks, Tomasz > > Best regards, > > Tomasz > > > >> + hactive = <1024>; > >> + vactive = <600>; > >> + hfront-porch = <64>; > >> + hback-porch = <16>; > >> + hsync-len = <48>; > >> + vback-porch = <64>; > >> + vfront-porch = <16>; > >> + vsync-len = <3>; > >> + }; > >> + }; > >> > >> }; > > Thanks for your review. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index bcf8079..4c6c3cd 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -290,4 +290,25 @@ clock-frequency = <24000000>; }; }; + + fimd@11c00000 { + pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; + pinctrl-names = "default"; + status = "okay"; + }; + + display-timings { + native-mode = <&timing0>; + timing0: timing { + clock-frequency = <50000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <64>; + hback-porch = <16>; + hsync-len = <48>; + vback-porch = <64>; + vfront-porch = <16>; + vsync-len = <3>; + }; + }; };