| Message ID | 1371220886-11616-1-git-send-email-chander.kashyap@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
ping. On 14 June 2013 20:11, Chander Kashyap <chander.kashyap@linaro.org> wrote: > Two cells were used to specify interrupts in mct node, while second cell > always remains unused. Hence use only one cell. > Suggested by Tomasz Figa. > > Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> > --- > arch/arm/boot/dts/exynos4210.dtsi | 19 +++++++++---------- > arch/arm/boot/dts/exynos4212.dtsi | 19 +++++++++---------- > arch/arm/boot/dts/exynos4412.dtsi | 23 +++++++++++------------ > arch/arm/boot/dts/exynos5250.dtsi | 19 +++++++++---------- > 4 files changed, 38 insertions(+), 42 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi > index 54710de..ad50010 100644 > --- a/arch/arm/boot/dts/exynos4210.dtsi > +++ b/arch/arm/boot/dts/exynos4210.dtsi > @@ -52,23 +52,22 @@ > compatible = "samsung,exynos4210-mct"; > reg = <0x10050000 0x800>; > interrupt-controller; > - #interrups-cells = <2>; > + #interrups-cells = <1>; > interrupt-parent = <&mct_map>; > - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, > - <4 0>, <5 0>; > + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; > clocks = <&clock 3>, <&clock 344>; > clock-names = "fin_pll", "mct"; > > mct_map: mct-map { > - #interrupt-cells = <2>; > + #interrupt-cells = <1>; > #address-cells = <0>; > #size-cells = <0>; > - interrupt-map = <0x0 0 &gic 0 57 0>, > - <0x1 0 &gic 0 69 0>, > - <0x2 0 &combiner 12 6>, > - <0x3 0 &combiner 12 7>, > - <0x4 0 &gic 0 42 0>, > - <0x5 0 &gic 0 48 0>; > + interrupt-map = <0 &gic 0 57 0>, > + <1 &gic 0 69 0>, > + <2 &combiner 12 6>, > + <3 &combiner 12 7>, > + <4 &gic 0 42 0>, > + <5 &gic 0 48 0>; > }; > }; > > diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi > index c0f60f4..ba9ada1 100644 > --- a/arch/arm/boot/dts/exynos4212.dtsi > +++ b/arch/arm/boot/dts/exynos4212.dtsi > @@ -39,21 +39,20 @@ > compatible = "samsung,exynos4412-mct"; > reg = <0x10050000 0x800>; > interrupt-controller; > - #interrups-cells = <2>; > + #interrups-cells = <1>; > interrupt-parent = <&mct_map>; > - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, > - <4 0>, <5 0>; > + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; > > mct_map: mct-map { > - #interrupt-cells = <2>; > + #interrupt-cells = <>; > #address-cells = <0>; > #size-cells = <0>; > - interrupt-map = <0x0 0 &gic 0 57 0>, > - <0x1 0 &combiner 12 5>, > - <0x2 0 &combiner 12 6>, > - <0x3 0 &combiner 12 7>, > - <0x4 0 &gic 1 12 0>, > - <0x5 0 &gic 1 12 0>; > + interrupt-map = <0 &gic 0 57 0>, > + <1 &combiner 12 5>, > + <2 &combiner 12 6>, > + <3 &combiner 12 7>, > + <4 &gic 1 12 0>, > + <5 &gic 1 12 0>; > }; > }; > }; > diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi > index 270b389..a680de7 100644 > --- a/arch/arm/boot/dts/exynos4412.dtsi > +++ b/arch/arm/boot/dts/exynos4412.dtsi > @@ -39,25 +39,24 @@ > compatible = "samsung,exynos4412-mct"; > reg = <0x10050000 0x800>; > interrupt-controller; > - #interrups-cells = <2>; > + #interrups-cells = <1>; > interrupt-parent = <&mct_map>; > - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, > - <4 0>, <5 0>, <6 0>, <7 0>; > + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>; > clocks = <&clock 3>, <&clock 344>; > clock-names = "fin_pll", "mct"; > > mct_map: mct-map { > - #interrupt-cells = <2>; > + #interrupt-cells = <1>; > #address-cells = <0>; > #size-cells = <0>; > - interrupt-map = <0x0 0 &gic 0 57 0>, > - <0x1 0 &combiner 12 5>, > - <0x2 0 &combiner 12 6>, > - <0x3 0 &combiner 12 7>, > - <0x4 0 &gic 1 12 0>, > - <0x5 0 &gic 1 12 0>, > - <0x6 0 &gic 1 12 0>, > - <0x7 0 &gic 1 12 0>; > + interrupt-map = <0 &gic 0 57 0>, > + <1 &combiner 12 5>, > + <2 &combiner 12 6>, > + <3 &combiner 12 7>, > + <4 &gic 1 12 0>, > + <5 &gic 1 12 0>, > + <6 &gic 1 12 0>, > + <7 &gic 1 12 0>; > }; > }; > > diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi > index a7cf3f5..4e633ef 100644 > --- a/arch/arm/boot/dts/exynos5250.dtsi > +++ b/arch/arm/boot/dts/exynos5250.dtsi > @@ -94,23 +94,22 @@ > compatible = "samsung,exynos4210-mct"; > reg = <0x101C0000 0x800>; > interrupt-controller; > - #interrups-cells = <2>; > + #interrups-cells = <1>; > interrupt-parent = <&mct_map>; > - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, > - <4 0>, <5 0>; > + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; > clocks = <&clock 1>, <&clock 335>; > clock-names = "fin_pll", "mct"; > > mct_map: mct-map { > - #interrupt-cells = <2>; > + #interrupt-cells = <1>; > #address-cells = <0>; > #size-cells = <0>; > - interrupt-map = <0x0 0 &combiner 23 3>, > - <0x1 0 &combiner 23 4>, > - <0x2 0 &combiner 25 2>, > - <0x3 0 &combiner 25 3>, > - <0x4 0 &gic 0 120 0>, > - <0x5 0 &gic 0 121 0>; > + interrupt-map = <0 &combiner 23 3>, > + <1 &combiner 23 4>, > + <2 &combiner 25 2>, > + <3 &combiner 25 3>, > + <4 &gic 0 120 0>, > + <5 &gic 0 121 0>; > }; > }; > > -- > 1.7.9.5 >
ping On 23 July 2013 15:17, Chander Kashyap <chander.kashyap@linaro.org> wrote: > ping. > > On 14 June 2013 20:11, Chander Kashyap <chander.kashyap@linaro.org> wrote: >> Two cells were used to specify interrupts in mct node, while second cell >> always remains unused. Hence use only one cell. >> Suggested by Tomasz Figa. >> >> Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> >> --- >> arch/arm/boot/dts/exynos4210.dtsi | 19 +++++++++---------- >> arch/arm/boot/dts/exynos4212.dtsi | 19 +++++++++---------- >> arch/arm/boot/dts/exynos4412.dtsi | 23 +++++++++++------------ >> arch/arm/boot/dts/exynos5250.dtsi | 19 +++++++++---------- >> 4 files changed, 38 insertions(+), 42 deletions(-) >> >> diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi >> index 54710de..ad50010 100644 >> --- a/arch/arm/boot/dts/exynos4210.dtsi >> +++ b/arch/arm/boot/dts/exynos4210.dtsi >> @@ -52,23 +52,22 @@ >> compatible = "samsung,exynos4210-mct"; >> reg = <0x10050000 0x800>; >> interrupt-controller; >> - #interrups-cells = <2>; >> + #interrups-cells = <1>; >> interrupt-parent = <&mct_map>; >> - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, >> - <4 0>, <5 0>; >> + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; >> clocks = <&clock 3>, <&clock 344>; >> clock-names = "fin_pll", "mct"; >> >> mct_map: mct-map { >> - #interrupt-cells = <2>; >> + #interrupt-cells = <1>; >> #address-cells = <0>; >> #size-cells = <0>; >> - interrupt-map = <0x0 0 &gic 0 57 0>, >> - <0x1 0 &gic 0 69 0>, >> - <0x2 0 &combiner 12 6>, >> - <0x3 0 &combiner 12 7>, >> - <0x4 0 &gic 0 42 0>, >> - <0x5 0 &gic 0 48 0>; >> + interrupt-map = <0 &gic 0 57 0>, >> + <1 &gic 0 69 0>, >> + <2 &combiner 12 6>, >> + <3 &combiner 12 7>, >> + <4 &gic 0 42 0>, >> + <5 &gic 0 48 0>; >> }; >> }; >> >> diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi >> index c0f60f4..ba9ada1 100644 >> --- a/arch/arm/boot/dts/exynos4212.dtsi >> +++ b/arch/arm/boot/dts/exynos4212.dtsi >> @@ -39,21 +39,20 @@ >> compatible = "samsung,exynos4412-mct"; >> reg = <0x10050000 0x800>; >> interrupt-controller; >> - #interrups-cells = <2>; >> + #interrups-cells = <1>; >> interrupt-parent = <&mct_map>; >> - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, >> - <4 0>, <5 0>; >> + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; >> >> mct_map: mct-map { >> - #interrupt-cells = <2>; >> + #interrupt-cells = <>; >> #address-cells = <0>; >> #size-cells = <0>; >> - interrupt-map = <0x0 0 &gic 0 57 0>, >> - <0x1 0 &combiner 12 5>, >> - <0x2 0 &combiner 12 6>, >> - <0x3 0 &combiner 12 7>, >> - <0x4 0 &gic 1 12 0>, >> - <0x5 0 &gic 1 12 0>; >> + interrupt-map = <0 &gic 0 57 0>, >> + <1 &combiner 12 5>, >> + <2 &combiner 12 6>, >> + <3 &combiner 12 7>, >> + <4 &gic 1 12 0>, >> + <5 &gic 1 12 0>; >> }; >> }; >> }; >> diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi >> index 270b389..a680de7 100644 >> --- a/arch/arm/boot/dts/exynos4412.dtsi >> +++ b/arch/arm/boot/dts/exynos4412.dtsi >> @@ -39,25 +39,24 @@ >> compatible = "samsung,exynos4412-mct"; >> reg = <0x10050000 0x800>; >> interrupt-controller; >> - #interrups-cells = <2>; >> + #interrups-cells = <1>; >> interrupt-parent = <&mct_map>; >> - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, >> - <4 0>, <5 0>, <6 0>, <7 0>; >> + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>; >> clocks = <&clock 3>, <&clock 344>; >> clock-names = "fin_pll", "mct"; >> >> mct_map: mct-map { >> - #interrupt-cells = <2>; >> + #interrupt-cells = <1>; >> #address-cells = <0>; >> #size-cells = <0>; >> - interrupt-map = <0x0 0 &gic 0 57 0>, >> - <0x1 0 &combiner 12 5>, >> - <0x2 0 &combiner 12 6>, >> - <0x3 0 &combiner 12 7>, >> - <0x4 0 &gic 1 12 0>, >> - <0x5 0 &gic 1 12 0>, >> - <0x6 0 &gic 1 12 0>, >> - <0x7 0 &gic 1 12 0>; >> + interrupt-map = <0 &gic 0 57 0>, >> + <1 &combiner 12 5>, >> + <2 &combiner 12 6>, >> + <3 &combiner 12 7>, >> + <4 &gic 1 12 0>, >> + <5 &gic 1 12 0>, >> + <6 &gic 1 12 0>, >> + <7 &gic 1 12 0>; >> }; >> }; >> >> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi >> index a7cf3f5..4e633ef 100644 >> --- a/arch/arm/boot/dts/exynos5250.dtsi >> +++ b/arch/arm/boot/dts/exynos5250.dtsi >> @@ -94,23 +94,22 @@ >> compatible = "samsung,exynos4210-mct"; >> reg = <0x101C0000 0x800>; >> interrupt-controller; >> - #interrups-cells = <2>; >> + #interrups-cells = <1>; >> interrupt-parent = <&mct_map>; >> - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, >> - <4 0>, <5 0>; >> + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; >> clocks = <&clock 1>, <&clock 335>; >> clock-names = "fin_pll", "mct"; >> >> mct_map: mct-map { >> - #interrupt-cells = <2>; >> + #interrupt-cells = <1>; >> #address-cells = <0>; >> #size-cells = <0>; >> - interrupt-map = <0x0 0 &combiner 23 3>, >> - <0x1 0 &combiner 23 4>, >> - <0x2 0 &combiner 25 2>, >> - <0x3 0 &combiner 25 3>, >> - <0x4 0 &gic 0 120 0>, >> - <0x5 0 &gic 0 121 0>; >> + interrupt-map = <0 &combiner 23 3>, >> + <1 &combiner 23 4>, >> + <2 &combiner 25 2>, >> + <3 &combiner 25 3>, >> + <4 &gic 0 120 0>, >> + <5 &gic 0 121 0>; >> }; >> }; >> >> -- >> 1.7.9.5 >> > > > > -- > with warm regards, > Chander Kashyap
On 08/12/13 15:23, Chander Kashyap wrote: > ping > > On 23 July 2013 15:17, Chander Kashyap<chander.kashyap@linaro.org> wrote: >> ping. >> >> On 14 June 2013 20:11, Chander Kashyap<chander.kashyap@linaro.org> wrote: >>> Two cells were used to specify interrupts in mct node, while second cell >>> always remains unused. Hence use only one cell. >>> Suggested by Tomasz Figa. >>> >>> Signed-off-by: Chander Kashyap<chander.kashyap@linaro.org> >>> --- >>> arch/arm/boot/dts/exynos4210.dtsi | 19 +++++++++---------- >>> arch/arm/boot/dts/exynos4212.dtsi | 19 +++++++++---------- >>> arch/arm/boot/dts/exynos4412.dtsi | 23 +++++++++++------------ >>> arch/arm/boot/dts/exynos5250.dtsi | 19 +++++++++---------- >>> 4 files changed, 38 insertions(+), 42 deletions(-) >>> >>> diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi >>> index 54710de..ad50010 100644 >>> --- a/arch/arm/boot/dts/exynos4210.dtsi >>> +++ b/arch/arm/boot/dts/exynos4210.dtsi >>> @@ -52,23 +52,22 @@ >>> compatible = "samsung,exynos4210-mct"; >>> reg =<0x10050000 0x800>; >>> interrupt-controller; >>> - #interrups-cells =<2>; >>> + #interrups-cells =<1>; >>> interrupt-parent =<&mct_map>; >>> - interrupts =<0 0>,<1 0>,<2 0>,<3 0>, >>> -<4 0>,<5 0>; >>> + interrupts =<0>,<1>,<2>,<3>,<4>,<5>; >>> clocks =<&clock 3>,<&clock 344>; >>> clock-names = "fin_pll", "mct"; >>> >>> mct_map: mct-map { >>> - #interrupt-cells =<2>; >>> + #interrupt-cells =<1>; >>> #address-cells =<0>; >>> #size-cells =<0>; >>> - interrupt-map =<0x0 0&gic 0 57 0>, >>> -<0x1 0&gic 0 69 0>, >>> -<0x2 0&combiner 12 6>, >>> -<0x3 0&combiner 12 7>, >>> -<0x4 0&gic 0 42 0>, >>> -<0x5 0&gic 0 48 0>; >>> + interrupt-map =<0&gic 0 57 0>, >>> +<1&gic 0 69 0>, >>> +<2&combiner 12 6>, >>> +<3&combiner 12 7>, >>> +<4&gic 0 42 0>, >>> +<5&gic 0 48 0>; >>> }; >>> }; >>> >>> diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi >>> index c0f60f4..ba9ada1 100644 >>> --- a/arch/arm/boot/dts/exynos4212.dtsi >>> +++ b/arch/arm/boot/dts/exynos4212.dtsi >>> @@ -39,21 +39,20 @@ >>> compatible = "samsung,exynos4412-mct"; >>> reg =<0x10050000 0x800>; >>> interrupt-controller; >>> - #interrups-cells =<2>; >>> + #interrups-cells =<1>; >>> interrupt-parent =<&mct_map>; >>> - interrupts =<0 0>,<1 0>,<2 0>,<3 0>, >>> -<4 0>,<5 0>; >>> + interrupts =<0>,<1>,<2>,<3>,<4>,<5>; >>> >>> mct_map: mct-map { >>> - #interrupt-cells =<2>; >>> + #interrupt-cells =<>; >>> #address-cells =<0>; >>> #size-cells =<0>; >>> - interrupt-map =<0x0 0&gic 0 57 0>, >>> -<0x1 0&combiner 12 5>, >>> -<0x2 0&combiner 12 6>, >>> -<0x3 0&combiner 12 7>, >>> -<0x4 0&gic 1 12 0>, >>> -<0x5 0&gic 1 12 0>; >>> + interrupt-map =<0&gic 0 57 0>, >>> +<1&combiner 12 5>, >>> +<2&combiner 12 6>, >>> +<3&combiner 12 7>, >>> +<4&gic 1 12 0>, >>> +<5&gic 1 12 0>; >>> }; >>> }; >>> }; >>> diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi >>> index 270b389..a680de7 100644 >>> --- a/arch/arm/boot/dts/exynos4412.dtsi >>> +++ b/arch/arm/boot/dts/exynos4412.dtsi >>> @@ -39,25 +39,24 @@ >>> compatible = "samsung,exynos4412-mct"; >>> reg =<0x10050000 0x800>; >>> interrupt-controller; >>> - #interrups-cells =<2>; >>> + #interrups-cells =<1>; >>> interrupt-parent =<&mct_map>; >>> - interrupts =<0 0>,<1 0>,<2 0>,<3 0>, >>> -<4 0>,<5 0>,<6 0>,<7 0>; >>> + interrupts =<0>,<1>,<2>,<3>,<4>,<5>,<6>,<7>; >>> clocks =<&clock 3>,<&clock 344>; >>> clock-names = "fin_pll", "mct"; >>> >>> mct_map: mct-map { >>> - #interrupt-cells =<2>; >>> + #interrupt-cells =<1>; >>> #address-cells =<0>; >>> #size-cells =<0>; >>> - interrupt-map =<0x0 0&gic 0 57 0>, >>> -<0x1 0&combiner 12 5>, >>> -<0x2 0&combiner 12 6>, >>> -<0x3 0&combiner 12 7>, >>> -<0x4 0&gic 1 12 0>, >>> -<0x5 0&gic 1 12 0>, >>> -<0x6 0&gic 1 12 0>, >>> -<0x7 0&gic 1 12 0>; >>> + interrupt-map =<0&gic 0 57 0>, >>> +<1&combiner 12 5>, >>> +<2&combiner 12 6>, >>> +<3&combiner 12 7>, >>> +<4&gic 1 12 0>, >>> +<5&gic 1 12 0>, >>> +<6&gic 1 12 0>, >>> +<7&gic 1 12 0>; >>> }; >>> }; >>> >>> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi >>> index a7cf3f5..4e633ef 100644 >>> --- a/arch/arm/boot/dts/exynos5250.dtsi >>> +++ b/arch/arm/boot/dts/exynos5250.dtsi >>> @@ -94,23 +94,22 @@ >>> compatible = "samsung,exynos4210-mct"; >>> reg =<0x101C0000 0x800>; >>> interrupt-controller; >>> - #interrups-cells =<2>; >>> + #interrups-cells =<1>; >>> interrupt-parent =<&mct_map>; >>> - interrupts =<0 0>,<1 0>,<2 0>,<3 0>, >>> -<4 0>,<5 0>; >>> + interrupts =<0>,<1>,<2>,<3>,<4>,<5>; >>> clocks =<&clock 1>,<&clock 335>; >>> clock-names = "fin_pll", "mct"; >>> >>> mct_map: mct-map { >>> - #interrupt-cells =<2>; >>> + #interrupt-cells =<1>; >>> #address-cells =<0>; >>> #size-cells =<0>; >>> - interrupt-map =<0x0 0&combiner 23 3>, >>> -<0x1 0&combiner 23 4>, >>> -<0x2 0&combiner 25 2>, >>> -<0x3 0&combiner 25 3>, >>> -<0x4 0&gic 0 120 0>, >>> -<0x5 0&gic 0 121 0>; >>> + interrupt-map =<0&combiner 23 3>, >>> +<1&combiner 23 4>, >>> +<2&combiner 25 2>, >>> +<3&combiner 25 3>, >>> +<4&gic 0 120 0>, >>> +<5&gic 0 121 0>; >>> }; >>> }; >>> >>> -- >>> 1.7.9.5 Should be updated with regarding Doc. Kukjin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 19 August 2013 00:57, Kukjin Kim <kgene.kim@samsung.com> wrote: > On 08/12/13 15:23, Chander Kashyap wrote: >> >> ping >> >> On 23 July 2013 15:17, Chander Kashyap<chander.kashyap@linaro.org> wrote: >>> >>> ping. >>> >>> On 14 June 2013 20:11, Chander Kashyap<chander.kashyap@linaro.org> >>> wrote: >>>> >>>> Two cells were used to specify interrupts in mct node, while second cell >>>> always remains unused. Hence use only one cell. >>>> Suggested by Tomasz Figa. >>>> >>>> Signed-off-by: Chander Kashyap<chander.kashyap@linaro.org> >>>> --- >>>> arch/arm/boot/dts/exynos4210.dtsi | 19 +++++++++---------- >>>> arch/arm/boot/dts/exynos4212.dtsi | 19 +++++++++---------- >>>> arch/arm/boot/dts/exynos4412.dtsi | 23 +++++++++++------------ >>>> arch/arm/boot/dts/exynos5250.dtsi | 19 +++++++++---------- >>>> 4 files changed, 38 insertions(+), 42 deletions(-) >>>> >>>> diff --git a/arch/arm/boot/dts/exynos4210.dtsi >>>> b/arch/arm/boot/dts/exynos4210.dtsi >>>> index 54710de..ad50010 100644 >>>> --- a/arch/arm/boot/dts/exynos4210.dtsi >>>> +++ b/arch/arm/boot/dts/exynos4210.dtsi >>>> @@ -52,23 +52,22 @@ >>>> compatible = "samsung,exynos4210-mct"; >>>> reg =<0x10050000 0x800>; >>>> interrupt-controller; >>>> - #interrups-cells =<2>; >>>> + #interrups-cells =<1>; >>>> interrupt-parent =<&mct_map>; >>>> - interrupts =<0 0>,<1 0>,<2 0>,<3 0>, >>>> -<4 0>,<5 0>; >>>> + interrupts =<0>,<1>,<2>,<3>,<4>,<5>; >>>> clocks =<&clock 3>,<&clock 344>; >>>> clock-names = "fin_pll", "mct"; >>>> >>>> mct_map: mct-map { >>>> - #interrupt-cells =<2>; >>>> + #interrupt-cells =<1>; >>>> #address-cells =<0>; >>>> #size-cells =<0>; >>>> - interrupt-map =<0x0 0&gic 0 57 0>, >>>> -<0x1 0&gic 0 69 0>, >>>> -<0x2 0&combiner 12 6>, >>>> -<0x3 0&combiner 12 7>, >>>> -<0x4 0&gic 0 42 0>, >>>> -<0x5 0&gic 0 48 0>; >>>> + interrupt-map =<0&gic 0 57 0>, >>>> +<1&gic 0 69 0>, >>>> >>>> +<2&combiner 12 6>, >>>> +<3&combiner 12 7>, >>>> +<4&gic 0 42 0>, >>>> +<5&gic 0 48 0>; >>>> >>>> }; >>>> }; >>>> >>>> diff --git a/arch/arm/boot/dts/exynos4212.dtsi >>>> b/arch/arm/boot/dts/exynos4212.dtsi >>>> index c0f60f4..ba9ada1 100644 >>>> --- a/arch/arm/boot/dts/exynos4212.dtsi >>>> +++ b/arch/arm/boot/dts/exynos4212.dtsi >>>> @@ -39,21 +39,20 @@ >>>> compatible = "samsung,exynos4412-mct"; >>>> reg =<0x10050000 0x800>; >>>> interrupt-controller; >>>> - #interrups-cells =<2>; >>>> + #interrups-cells =<1>; >>>> interrupt-parent =<&mct_map>; >>>> - interrupts =<0 0>,<1 0>,<2 0>,<3 0>, >>>> -<4 0>,<5 0>; >>>> + interrupts =<0>,<1>,<2>,<3>,<4>,<5>; >>>> >>>> mct_map: mct-map { >>>> - #interrupt-cells =<2>; >>>> + #interrupt-cells =<>; >>>> #address-cells =<0>; >>>> #size-cells =<0>; >>>> - interrupt-map =<0x0 0&gic 0 57 0>, >>>> -<0x1 0&combiner 12 5>, >>>> -<0x2 0&combiner 12 6>, >>>> -<0x3 0&combiner 12 7>, >>>> -<0x4 0&gic 1 12 0>, >>>> -<0x5 0&gic 1 12 0>; >>>> + interrupt-map =<0&gic 0 57 0>, >>>> +<1&combiner 12 5>, >>>> +<2&combiner 12 6>, >>>> +<3&combiner 12 7>, >>>> +<4&gic 1 12 0>, >>>> +<5&gic 1 12 0>; >>>> >>>> }; >>>> }; >>>> }; >>>> diff --git a/arch/arm/boot/dts/exynos4412.dtsi >>>> b/arch/arm/boot/dts/exynos4412.dtsi >>>> index 270b389..a680de7 100644 >>>> --- a/arch/arm/boot/dts/exynos4412.dtsi >>>> +++ b/arch/arm/boot/dts/exynos4412.dtsi >>>> @@ -39,25 +39,24 @@ >>>> compatible = "samsung,exynos4412-mct"; >>>> reg =<0x10050000 0x800>; >>>> interrupt-controller; >>>> - #interrups-cells =<2>; >>>> + #interrups-cells =<1>; >>>> interrupt-parent =<&mct_map>; >>>> - interrupts =<0 0>,<1 0>,<2 0>,<3 0>, >>>> -<4 0>,<5 0>,<6 0>,<7 0>; >>>> + interrupts =<0>,<1>,<2>,<3>,<4>,<5>,<6>,<7>; >>>> clocks =<&clock 3>,<&clock 344>; >>>> clock-names = "fin_pll", "mct"; >>>> >>>> mct_map: mct-map { >>>> - #interrupt-cells =<2>; >>>> + #interrupt-cells =<1>; >>>> #address-cells =<0>; >>>> #size-cells =<0>; >>>> - interrupt-map =<0x0 0&gic 0 57 0>, >>>> -<0x1 0&combiner 12 5>, >>>> -<0x2 0&combiner 12 6>, >>>> -<0x3 0&combiner 12 7>, >>>> -<0x4 0&gic 1 12 0>, >>>> -<0x5 0&gic 1 12 0>, >>>> -<0x6 0&gic 1 12 0>, >>>> -<0x7 0&gic 1 12 0>; >>>> + interrupt-map =<0&gic 0 57 0>, >>>> +<1&combiner 12 5>, >>>> +<2&combiner 12 6>, >>>> +<3&combiner 12 7>, >>>> +<4&gic 1 12 0>, >>>> +<5&gic 1 12 0>, >>>> +<6&gic 1 12 0>, >>>> +<7&gic 1 12 0>; >>>> >>>> }; >>>> }; >>>> >>>> diff --git a/arch/arm/boot/dts/exynos5250.dtsi >>>> b/arch/arm/boot/dts/exynos5250.dtsi >>>> index a7cf3f5..4e633ef 100644 >>>> --- a/arch/arm/boot/dts/exynos5250.dtsi >>>> +++ b/arch/arm/boot/dts/exynos5250.dtsi >>>> @@ -94,23 +94,22 @@ >>>> compatible = "samsung,exynos4210-mct"; >>>> reg =<0x101C0000 0x800>; >>>> interrupt-controller; >>>> - #interrups-cells =<2>; >>>> + #interrups-cells =<1>; >>>> interrupt-parent =<&mct_map>; >>>> - interrupts =<0 0>,<1 0>,<2 0>,<3 0>, >>>> -<4 0>,<5 0>; >>>> + interrupts =<0>,<1>,<2>,<3>,<4>,<5>; >>>> clocks =<&clock 1>,<&clock 335>; >>>> clock-names = "fin_pll", "mct"; >>>> >>>> mct_map: mct-map { >>>> - #interrupt-cells =<2>; >>>> + #interrupt-cells =<1>; >>>> #address-cells =<0>; >>>> #size-cells =<0>; >>>> - interrupt-map =<0x0 0&combiner 23 3>, >>>> -<0x1 0&combiner 23 4>, >>>> -<0x2 0&combiner 25 2>, >>>> -<0x3 0&combiner 25 3>, >>>> -<0x4 0&gic 0 120 0>, >>>> -<0x5 0&gic 0 121 0>; >>>> >>>> + interrupt-map =<0&combiner 23 3>, >>>> +<1&combiner 23 4>, >>>> +<2&combiner 25 2>, >>>> +<3&combiner 25 3>, >>>> +<4&gic 0 120 0>, >>>> +<5&gic 0 121 0>; >>>> }; >>>> }; >>>> >>>> -- >>>> 1.7.9.5 > > > Should be updated with regarding Doc. Will update the document. Thanks. > > Kukjin
Hi Chander, On Wednesday 28 of August 2013 15:20:40 Chander Kashyap wrote: > On 19 August 2013 00:57, Kukjin Kim <kgene.kim@samsung.com> wrote: > > On 08/12/13 15:23, Chander Kashyap wrote: > >> ping > >> > >> On 23 July 2013 15:17, Chander Kashyap<chander.kashyap@linaro.org> wrote: > >>> ping. > >>> > >>> On 14 June 2013 20:11, Chander Kashyap<chander.kashyap@linaro.org> > >>> > >>> wrote: > >>>> Two cells were used to specify interrupts in mct node, while second > >>>> cell > >>>> always remains unused. Hence use only one cell. > >>>> Suggested by Tomasz Figa. > >>>> > >>>> Signed-off-by: Chander Kashyap<chander.kashyap@linaro.org> > >>>> --- > >>>> > >>>> arch/arm/boot/dts/exynos4210.dtsi | 19 +++++++++---------- > >>>> arch/arm/boot/dts/exynos4212.dtsi | 19 +++++++++---------- > >>>> arch/arm/boot/dts/exynos4412.dtsi | 23 +++++++++++------------ > >>>> arch/arm/boot/dts/exynos5250.dtsi | 19 +++++++++---------- > >>>> 4 files changed, 38 insertions(+), 42 deletions(-) > >>>> [snip] > > > > Should be updated with regarding Doc. > > Will update the document. Apparently I missed your patch and did the same change for Exynos 4 SoCs in my patch series[1] cleaning up Exynos 4 device tree files a bit. Since in my series it is a part of a more complex change, i.e. moving mct node to exynos4x12.dtsi and update of MCT bindings documentation, would you mind if we could keep with my patch doing this change for Exynos 4 and yours taking care for Exynos 5? The documentation is already being updated in my series, so you could just drop the changes done to exynos4*.dtsi files in next version. [1] http://thread.gmane.org/gmane.linux.kernel.samsung-soc/22207 Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 28 August 2013 16:01, Tomasz Figa <t.figa@samsung.com> wrote: > Hi Chander, > > On Wednesday 28 of August 2013 15:20:40 Chander Kashyap wrote: >> On 19 August 2013 00:57, Kukjin Kim <kgene.kim@samsung.com> wrote: >> > On 08/12/13 15:23, Chander Kashyap wrote: >> >> ping >> >> >> >> On 23 July 2013 15:17, Chander Kashyap<chander.kashyap@linaro.org> > wrote: >> >>> ping. >> >>> >> >>> On 14 June 2013 20:11, Chander Kashyap<chander.kashyap@linaro.org> >> >>> >> >>> wrote: >> >>>> Two cells were used to specify interrupts in mct node, while second >> >>>> cell >> >>>> always remains unused. Hence use only one cell. >> >>>> Suggested by Tomasz Figa. >> >>>> >> >>>> Signed-off-by: Chander Kashyap<chander.kashyap@linaro.org> >> >>>> --- >> >>>> >> >>>> arch/arm/boot/dts/exynos4210.dtsi | 19 +++++++++---------- >> >>>> arch/arm/boot/dts/exynos4212.dtsi | 19 +++++++++---------- >> >>>> arch/arm/boot/dts/exynos4412.dtsi | 23 +++++++++++------------ >> >>>> arch/arm/boot/dts/exynos5250.dtsi | 19 +++++++++---------- >> >>>> 4 files changed, 38 insertions(+), 42 deletions(-) >> >>>> > [snip] >> > >> > Should be updated with regarding Doc. >> >> Will update the document. > > Apparently I missed your patch and did the same change for Exynos 4 SoCs in > my patch series[1] cleaning up Exynos 4 device tree files a bit. > > Since in my series it is a part of a more complex change, i.e. moving mct > node to exynos4x12.dtsi and update of MCT bindings documentation, would you > mind if we could keep with my patch doing this change for Exynos 4 and > yours taking care for Exynos 5? > > The documentation is already being updated in my series, so you could just > drop the changes done to exynos4*.dtsi files in next version. Ok, That make sense. I will post patche with changes for exynos5, only > > [1] http://thread.gmane.org/gmane.linux.kernel.samsung-soc/22207 > > Best regards, > Tomasz >
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 54710de..ad50010 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -52,23 +52,22 @@ compatible = "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; interrupt-controller; - #interrups-cells = <2>; + #interrups-cells = <1>; interrupt-parent = <&mct_map>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, - <4 0>, <5 0>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; clocks = <&clock 3>, <&clock 344>; clock-names = "fin_pll", "mct"; mct_map: mct-map { - #interrupt-cells = <2>; + #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = <0x0 0 &gic 0 57 0>, - <0x1 0 &gic 0 69 0>, - <0x2 0 &combiner 12 6>, - <0x3 0 &combiner 12 7>, - <0x4 0 &gic 0 42 0>, - <0x5 0 &gic 0 48 0>; + interrupt-map = <0 &gic 0 57 0>, + <1 &gic 0 69 0>, + <2 &combiner 12 6>, + <3 &combiner 12 7>, + <4 &gic 0 42 0>, + <5 &gic 0 48 0>; }; }; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index c0f60f4..ba9ada1 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -39,21 +39,20 @@ compatible = "samsung,exynos4412-mct"; reg = <0x10050000 0x800>; interrupt-controller; - #interrups-cells = <2>; + #interrups-cells = <1>; interrupt-parent = <&mct_map>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, - <4 0>, <5 0>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; mct_map: mct-map { - #interrupt-cells = <2>; + #interrupt-cells = <>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = <0x0 0 &gic 0 57 0>, - <0x1 0 &combiner 12 5>, - <0x2 0 &combiner 12 6>, - <0x3 0 &combiner 12 7>, - <0x4 0 &gic 1 12 0>, - <0x5 0 &gic 1 12 0>; + interrupt-map = <0 &gic 0 57 0>, + <1 &combiner 12 5>, + <2 &combiner 12 6>, + <3 &combiner 12 7>, + <4 &gic 1 12 0>, + <5 &gic 1 12 0>; }; }; }; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 270b389..a680de7 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -39,25 +39,24 @@ compatible = "samsung,exynos4412-mct"; reg = <0x10050000 0x800>; interrupt-controller; - #interrups-cells = <2>; + #interrups-cells = <1>; interrupt-parent = <&mct_map>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, - <4 0>, <5 0>, <6 0>, <7 0>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>; clocks = <&clock 3>, <&clock 344>; clock-names = "fin_pll", "mct"; mct_map: mct-map { - #interrupt-cells = <2>; + #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = <0x0 0 &gic 0 57 0>, - <0x1 0 &combiner 12 5>, - <0x2 0 &combiner 12 6>, - <0x3 0 &combiner 12 7>, - <0x4 0 &gic 1 12 0>, - <0x5 0 &gic 1 12 0>, - <0x6 0 &gic 1 12 0>, - <0x7 0 &gic 1 12 0>; + interrupt-map = <0 &gic 0 57 0>, + <1 &combiner 12 5>, + <2 &combiner 12 6>, + <3 &combiner 12 7>, + <4 &gic 1 12 0>, + <5 &gic 1 12 0>, + <6 &gic 1 12 0>, + <7 &gic 1 12 0>; }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index a7cf3f5..4e633ef 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -94,23 +94,22 @@ compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; interrupt-controller; - #interrups-cells = <2>; + #interrups-cells = <1>; interrupt-parent = <&mct_map>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, - <4 0>, <5 0>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; clocks = <&clock 1>, <&clock 335>; clock-names = "fin_pll", "mct"; mct_map: mct-map { - #interrupt-cells = <2>; + #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = <0x0 0 &combiner 23 3>, - <0x1 0 &combiner 23 4>, - <0x2 0 &combiner 25 2>, - <0x3 0 &combiner 25 3>, - <0x4 0 &gic 0 120 0>, - <0x5 0 &gic 0 121 0>; + interrupt-map = <0 &combiner 23 3>, + <1 &combiner 23 4>, + <2 &combiner 25 2>, + <3 &combiner 25 3>, + <4 &gic 0 120 0>, + <5 &gic 0 121 0>; }; };
Two cells were used to specify interrupts in mct node, while second cell always remains unused. Hence use only one cell. Suggested by Tomasz Figa. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> --- arch/arm/boot/dts/exynos4210.dtsi | 19 +++++++++---------- arch/arm/boot/dts/exynos4212.dtsi | 19 +++++++++---------- arch/arm/boot/dts/exynos4412.dtsi | 23 +++++++++++------------ arch/arm/boot/dts/exynos5250.dtsi | 19 +++++++++---------- 4 files changed, 38 insertions(+), 42 deletions(-)