diff mbox

[v3,01/10] ARM: dts: fork out common Exynos5 nodes

Message ID 1371466836-4111-2-git-send-email-chander.kashyap@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Chander Kashyap June 17, 2013, 11 a.m. UTC 
In preparation of adding support for Exynos5420, which has many peripherals
similar to Exynos5250, a new common Exynos5 device tree source file is
created out of the exising Exynos5250 device tree source file. Only the
common nodes required for basic boot up on Exynos5420 based boards are moved
into this new file and the rest of the common nodes would be moved subsequently.

Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
---
 arch/arm/boot/dts/exynos5.dtsi    |  111 +++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/exynos5250.dtsi |   68 +----------------------
 2 files changed, 113 insertions(+), 66 deletions(-)
 create mode 100644 arch/arm/boot/dts/exynos5.dtsi

Comments

Kim Kukjin June 17, 2013, 11:38 a.m. UTC | #1 
Chander Kashyap wrote:
> 
> In preparation of adding support for Exynos5420, which has many
> peripherals
> similar to Exynos5250, a new common Exynos5 device tree source file is
> created out of the exising Exynos5250 device tree source file. Only the
> common nodes required for basic boot up on Exynos5420 based boards are
> moved
> into this new file and the rest of the common nodes would be moved
> subsequently.
> 
Yeah, most of exynos5250 is used in exynos5420. Since created exynos5.dtsi
cannot support exynos5440 so that would be helpful if you could add some
comments in git log and codes about that.

> Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
> ---
>  arch/arm/boot/dts/exynos5.dtsi    |  111
> +++++++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/exynos5250.dtsi |   68 +----------------------
>  2 files changed, 113 insertions(+), 66 deletions(-)
>  create mode 100644 arch/arm/boot/dts/exynos5.dtsi
> 
> diff --git a/arch/arm/boot/dts/exynos5.dtsi
> b/arch/arm/boot/dts/exynos5.dtsi
> new file mode 100644
> index 0000000..5684f89
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos5.dtsi
> @@ -0,0 +1,111 @@
> +/*
> + * Samsung's Exynos5 SoC series common device tree source
> + *
> + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + *
> + * Samsung's Exynos5 SoC series device nodes are listed in this file.
> Particular
> + * SoCs from Exynos5 series can include this file and provide values for
> SoCs
> + * specfic bindings.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include "skeleton.dtsi"
> +
> +/ {
> +	interrupt-parent = <&gic>;
> +
> +	chipid@10000000 {
> +		compatible = "samsung,exynos4210-chipid";
> +		reg = <0x10000000 0x100>;
> +	};
> +
> +	watchdog {
> +		compatible = "samsung,s3c2410-wdt";
> +		reg = <0x101D0000 0x100>;
> +		interrupts = <0 42 0>;
> +		status = "disabled";
> +	};

I think, you put them by the address order. But as you know, some of them
are different with exynos5250 and exynos5420. So alphabetical ordering would
be helpful after putting core part.
So, chipid, gic, combiner and alphabetical ordering IPs...

> +
> +	rtc {
> +		compatible = "samsung,s3c6410-rtc";
> +		reg = <0x101E0000 0x100>;
> +		interrupts = <0 43 0>, <0 44 0>;
> +		status = "disabled";
> +	};
> +
> +	combiner:interrupt-controller@10440000 {
> +		compatible = "samsung,exynos4210-combiner";
> +		#interrupt-cells = <2>;
> +		interrupt-controller;
> +		samsung,combiner-nr = <32>;
> +		reg = <0x10440000 0x1000>;
> +		interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
> +				<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
> +				<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
> +				<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
> +				<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
> +				<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
> +				<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
> +				<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
> +	};
> +
> +	gic:interrupt-controller@10481000 {
> +		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
> +		#interrupt-cells = <3>;
> +		interrupt-controller;
> +		reg =	<0x10481000 0x1000>,
> +			<0x10482000 0x1000>,
> +			<0x10484000 0x2000>,
> +			<0x10486000 0x2000>;
> +		interrupts = <1 9 0xf04>;
> +	};
> +
> +	dwmmc_0: dwmmc0@12200000 {
> +		compatible = "samsung,exynos5250-dw-mshc";
> +		interrupts = <0 75 0>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +	};
> +
> +	dwmmc_1: dwmmc1@12210000 {
> +		compatible = "samsung,exynos5250-dw-mshc";
> +		interrupts = <0 76 0>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +	};
> +
> +	dwmmc_2: dwmmc2@12220000 {
> +		compatible = "samsung,exynos5250-dw-mshc";
> +		interrupts = <0 77 0>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +	};
> +
> +	serial@12C00000 {
> +		compatible = "samsung,exynos4210-uart";
> +		reg = <0x12C00000 0x100>;
> +		interrupts = <0 51 0>;
> +	};
> +
> +	serial@12C10000 {
> +		compatible = "samsung,exynos4210-uart";
> +		reg = <0x12C10000 0x100>;
> +		interrupts = <0 52 0>;
> +	};
> +
> +	serial@12C20000 {
> +		compatible = "samsung,exynos4210-uart";
> +		reg = <0x12C20000 0x100>;
> +		interrupts = <0 53 0>;
> +	};
> +
> +	serial@12C30000 {
> +		compatible = "samsung,exynos4210-uart";
> +		reg = <0x12C30000 0x100>;
> +		interrupts = <0 54 0>;
> +	};
> +};
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi
> b/arch/arm/boot/dts/exynos5250.dtsi
> index 0673524..2b59ea3 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -17,12 +17,11 @@
>   * published by the Free Software Foundation.
>  */
> 
> -/include/ "skeleton.dtsi"
> -/include/ "exynos5250-pinctrl.dtsi"
> +#include "exynos5.dtsi"
> +#include "exynos5250-pinctrl.dtsi"
> 
I remember, to use #include is in Padma's patch and I've applied in my
local. So don't change it and just adding inclusion exynos5 is enough.

Others look good to me.

Thanks,
- Kukjin

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Chander Kashyap June 18, 2013, 4:24 a.m. UTC | #2 
On 17 June 2013 17:08, Kukjin Kim <kgene.kim@samsung.com> wrote:
> Chander Kashyap wrote:
>>
>> In preparation of adding support for Exynos5420, which has many
>> peripherals
>> similar to Exynos5250, a new common Exynos5 device tree source file is
>> created out of the exising Exynos5250 device tree source file. Only the
>> common nodes required for basic boot up on Exynos5420 based boards are
>> moved
>> into this new file and the rest of the common nodes would be moved
>> subsequently.
>>
> Yeah, most of exynos5250 is used in exynos5420. Since created exynos5.dtsi
> cannot support exynos5440 so that would be helpful if you could add some
> comments in git log and codes about that.
Sure, i will add comments regarding 5440.
>
>> Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
>> ---
>>  arch/arm/boot/dts/exynos5.dtsi    |  111
>> +++++++++++++++++++++++++++++++++++++
>>  arch/arm/boot/dts/exynos5250.dtsi |   68 +----------------------
>>  2 files changed, 113 insertions(+), 66 deletions(-)
>>  create mode 100644 arch/arm/boot/dts/exynos5.dtsi
>>
>> diff --git a/arch/arm/boot/dts/exynos5.dtsi
>> b/arch/arm/boot/dts/exynos5.dtsi
>> new file mode 100644
>> index 0000000..5684f89
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/exynos5.dtsi
>> @@ -0,0 +1,111 @@
>> +/*
>> + * Samsung's Exynos5 SoC series common device tree source
>> + *
>> + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
>> + *           http://www.samsung.com
>> + *
>> + * Samsung's Exynos5 SoC series device nodes are listed in this file.
>> Particular
>> + * SoCs from Exynos5 series can include this file and provide values for
>> SoCs
>> + * specfic bindings.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include "skeleton.dtsi"
>> +
>> +/ {
>> +     interrupt-parent = <&gic>;
>> +
>> +     chipid@10000000 {
>> +             compatible = "samsung,exynos4210-chipid";
>> +             reg = <0x10000000 0x100>;
>> +     };
>> +
>> +     watchdog {
>> +             compatible = "samsung,s3c2410-wdt";
>> +             reg = <0x101D0000 0x100>;
>> +             interrupts = <0 42 0>;
>> +             status = "disabled";
>> +     };
>
> I think, you put them by the address order. But as you know, some of them
> are different with exynos5250 and exynos5420. So alphabetical ordering would
> be helpful after putting core part.
> So, chipid, gic, combiner and alphabetical ordering IPs...
Ok i will re-order the nodes.

>
>> +
>> +     rtc {
>> +             compatible = "samsung,s3c6410-rtc";
>> +             reg = <0x101E0000 0x100>;
>> +             interrupts = <0 43 0>, <0 44 0>;
>> +             status = "disabled";
>> +     };
>> +
>> +     combiner:interrupt-controller@10440000 {
>> +             compatible = "samsung,exynos4210-combiner";
>> +             #interrupt-cells = <2>;
>> +             interrupt-controller;
>> +             samsung,combiner-nr = <32>;
>> +             reg = <0x10440000 0x1000>;
>> +             interrupts =    <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
>> +                             <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
>> +                             <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
>> +                             <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
>> +                             <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
>> +                             <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
>> +                             <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
>> +                             <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
>> +     };
>> +
>> +     gic:interrupt-controller@10481000 {
>> +             compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
>> +             #interrupt-cells = <3>;
>> +             interrupt-controller;
>> +             reg =   <0x10481000 0x1000>,
>> +                     <0x10482000 0x1000>,
>> +                     <0x10484000 0x2000>,
>> +                     <0x10486000 0x2000>;
>> +             interrupts = <1 9 0xf04>;
>> +     };
>> +
>> +     dwmmc_0: dwmmc0@12200000 {
>> +             compatible = "samsung,exynos5250-dw-mshc";
>> +             interrupts = <0 75 0>;
>> +             #address-cells = <1>;
>> +             #size-cells = <0>;
>> +     };
>> +
>> +     dwmmc_1: dwmmc1@12210000 {
>> +             compatible = "samsung,exynos5250-dw-mshc";
>> +             interrupts = <0 76 0>;
>> +             #address-cells = <1>;
>> +             #size-cells = <0>;
>> +     };
>> +
>> +     dwmmc_2: dwmmc2@12220000 {
>> +             compatible = "samsung,exynos5250-dw-mshc";
>> +             interrupts = <0 77 0>;
>> +             #address-cells = <1>;
>> +             #size-cells = <0>;
>> +     };
>> +
>> +     serial@12C00000 {
>> +             compatible = "samsung,exynos4210-uart";
>> +             reg = <0x12C00000 0x100>;
>> +             interrupts = <0 51 0>;
>> +     };
>> +
>> +     serial@12C10000 {
>> +             compatible = "samsung,exynos4210-uart";
>> +             reg = <0x12C10000 0x100>;
>> +             interrupts = <0 52 0>;
>> +     };
>> +
>> +     serial@12C20000 {
>> +             compatible = "samsung,exynos4210-uart";
>> +             reg = <0x12C20000 0x100>;
>> +             interrupts = <0 53 0>;
>> +     };
>> +
>> +     serial@12C30000 {
>> +             compatible = "samsung,exynos4210-uart";
>> +             reg = <0x12C30000 0x100>;
>> +             interrupts = <0 54 0>;
>> +     };
>> +};
>> diff --git a/arch/arm/boot/dts/exynos5250.dtsi
>> b/arch/arm/boot/dts/exynos5250.dtsi
>> index 0673524..2b59ea3 100644
>> --- a/arch/arm/boot/dts/exynos5250.dtsi
>> +++ b/arch/arm/boot/dts/exynos5250.dtsi
>> @@ -17,12 +17,11 @@
>>   * published by the Free Software Foundation.
>>  */
>>
>> -/include/ "skeleton.dtsi"
>> -/include/ "exynos5250-pinctrl.dtsi"
>> +#include "exynos5.dtsi"
>> +#include "exynos5250-pinctrl.dtsi"
>>
> I remember, to use #include is in Padma's patch and I've applied in my
> local. So don't change it and just adding inclusion exynos5 is enough.
Sure i will change it and use #include in exynos5.dtsi only.
>
> Others look good to me.

Thanks for the review.
>
> Thanks,
> - Kukjin
>



--
with warm regards,
Chander Kashyap
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
new file mode 100644
index 0000000..5684f89
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -0,0 +1,111 @@ 
+/*
+ * Samsung's Exynos5 SoC series common device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos5 SoC series device nodes are listed in this file. Particular
+ * SoCs from Exynos5 series can include this file and provide values for SoCs
+ * specfic bindings.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	chipid@10000000 {
+		compatible = "samsung,exynos4210-chipid";
+		reg = <0x10000000 0x100>;
+	};
+
+	watchdog {
+		compatible = "samsung,s3c2410-wdt";
+		reg = <0x101D0000 0x100>;
+		interrupts = <0 42 0>;
+		status = "disabled";
+	};
+
+	rtc {
+		compatible = "samsung,s3c6410-rtc";
+		reg = <0x101E0000 0x100>;
+		interrupts = <0 43 0>, <0 44 0>;
+		status = "disabled";
+	};
+
+	combiner:interrupt-controller@10440000 {
+		compatible = "samsung,exynos4210-combiner";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		samsung,combiner-nr = <32>;
+		reg = <0x10440000 0x1000>;
+		interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+				<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+				<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+				<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+				<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+				<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
+				<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+				<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+	};
+
+	gic:interrupt-controller@10481000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg =	<0x10481000 0x1000>,
+			<0x10482000 0x1000>,
+			<0x10484000 0x2000>,
+			<0x10486000 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	dwmmc_0: dwmmc0@12200000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		interrupts = <0 75 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dwmmc_1: dwmmc1@12210000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		interrupts = <0 76 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dwmmc_2: dwmmc2@12220000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		interrupts = <0 77 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	serial@12C00000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C00000 0x100>;
+		interrupts = <0 51 0>;
+	};
+
+	serial@12C10000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C10000 0x100>;
+		interrupts = <0 52 0>;
+	};
+
+	serial@12C20000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C20000 0x100>;
+		interrupts = <0 53 0>;
+	};
+
+	serial@12C30000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C30000 0x100>;
+		interrupts = <0 54 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 0673524..2b59ea3 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -17,12 +17,11 @@ 
  * published by the Free Software Foundation.
 */
 
-/include/ "skeleton.dtsi"
-/include/ "exynos5250-pinctrl.dtsi"
+#include "exynos5.dtsi"
+#include "exynos5250-pinctrl.dtsi"
 
 / {
 	compatible = "samsung,exynos5250";
-	interrupt-parent = <&gic>;
 
 	aliases {
 		spi0 = &spi_0;
@@ -51,11 +50,6 @@ 
 		pinctrl3 = &pinctrl_3;
 	};
 
-	chipid@10000000 {
-		compatible = "samsung,exynos4210-chipid";
-		reg = <0x10000000 0x100>;
-	};
-
 	pd_gsc: gsc-power-domain@0x10044000 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044000 0x20>;
@@ -72,17 +66,6 @@ 
 		#clock-cells = <1>;
 	};
 
-	gic:interrupt-controller@10481000 {
-		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x10481000 0x1000>,
-		      <0x10482000 0x1000>,
-		      <0x10484000 0x2000>,
-		      <0x10486000 0x2000>;
-		interrupts = <1 9 0xf04>;
-	};
-
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <1 13 0xf08>,
@@ -91,22 +74,6 @@ 
 			     <1 10 0xf08>;
 	};
 
-	combiner:interrupt-controller@10440000 {
-		compatible = "samsung,exynos4210-combiner";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		samsung,combiner-nr = <32>;
-		reg = <0x10440000 0x1000>;
-		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-			     <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-			     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-			     <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-			     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
-	};
-
 	mct@101C0000 {
 		compatible = "samsung,exynos4210-mct";
 		reg = <0x101C0000 0x800>;
@@ -168,9 +135,6 @@ 
 	};
 
 	watchdog {
-		compatible = "samsung,s3c2410-wdt";
-		reg = <0x101D0000 0x100>;
-		interrupts = <0 42 0>;
 		clocks = <&clock 336>;
 		clock-names = "watchdog";
 	};
@@ -183,12 +147,8 @@ 
 	};
 
 	rtc {
-		compatible = "samsung,s3c6410-rtc";
-		reg = <0x101E0000 0x100>;
-		interrupts = <0 43 0>, <0 44 0>;
 		clocks = <&clock 337>;
 		clock-names = "rtc";
-		status = "disabled";
 	};
 
 	tmu@10060000 {
@@ -200,33 +160,21 @@ 
 	};
 
 	serial@12C00000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C00000 0x100>;
-		interrupts = <0 51 0>;
 		clocks = <&clock 289>, <&clock 146>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@12C10000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C10000 0x100>;
-		interrupts = <0 52 0>;
 		clocks = <&clock 290>, <&clock 147>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@12C20000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C20000 0x100>;
-		interrupts = <0 53 0>;
 		clocks = <&clock 291>, <&clock 148>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@12C30000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C30000 0x100>;
-		interrupts = <0 54 0>;
 		clocks = <&clock 292>, <&clock 149>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
@@ -405,31 +353,19 @@ 
 	};
 
 	dwmmc_0: dwmmc0@12200000 {
-		compatible = "samsung,exynos5250-dw-mshc";
 		reg = <0x12200000 0x1000>;
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		clocks = <&clock 280>, <&clock 139>;
 		clock-names = "biu", "ciu";
 	};
 
 	dwmmc_1: dwmmc1@12210000 {
-		compatible = "samsung,exynos5250-dw-mshc";
 		reg = <0x12210000 0x1000>;
-		interrupts = <0 76 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		clocks = <&clock 281>, <&clock 140>;
 		clock-names = "biu", "ciu";
 	};
 
 	dwmmc_2: dwmmc2@12220000 {
-		compatible = "samsung,exynos5250-dw-mshc";
 		reg = <0x12220000 0x1000>;
-		interrupts = <0 77 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		clocks = <&clock 282>, <&clock 141>;
 		clock-names = "biu", "ciu";
 	};