diff mbox

[4/8] ARM: dts: Use generic DMA bindings for Exynos4 SPI devices

Message ID 1371819024-12596-5-git-send-email-s.nawrocki@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Sylwester Nawrocki/Kernel \(PLT\) /SRPOL/Staff Engineer/Samsung Electronics June 21, 2013, 12:50 p.m. UTC 
The Exynos4 SPI controller uses the PL330 DMA controller which has
migrated to the generic DMA bindings since commit b5be04d35dbb2e00
"spi: s3c64xx: Modify SPI driver to use generic DMA DT support".
Use the generic bindings to specify the corresponding DMA to make
the SPI usable again on Exynos4x12 SOCs.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 arch/arm/boot/dts/exynos4.dtsi |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 3f94fe8..bce2254 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -297,8 +297,8 @@ 
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13920000 0x100>;
 		interrupts = <0 66 0>;
-		tx-dma-channel = <&pdma0 7>; /* preliminary */
-		rx-dma-channel = <&pdma0 6>; /* preliminary */
+		dmas = <&pdma0 7>, <&pdma0 6>;
+		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&clock 327>, <&clock 159>;
@@ -312,8 +312,8 @@ 
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13930000 0x100>;
 		interrupts = <0 67 0>;
-		tx-dma-channel = <&pdma1 7>; /* preliminary */
-		rx-dma-channel = <&pdma1 6>; /* preliminary */
+		dmas = <&pdma1 7>, <&pdma1 6>;
+		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&clock 328>, <&clock 160>;
@@ -327,8 +327,8 @@ 
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13940000 0x100>;
 		interrupts = <0 68 0>;
-		tx-dma-channel = <&pdma0 9>; /* preliminary */
-		rx-dma-channel = <&pdma0 8>; /* preliminary */
+		dmas = <&pdma0 9>, <&pdma0 8>;
+		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&clock 329>, <&clock 161>;