| Message ID | 1375695882-16004-1-git-send-email-vikas.sajjan@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Mon, Aug 5, 2013 at 5:44 AM, Vikas Sajjan <vikas.sajjan@linaro.org> wrote: > While trying to get boot-logo up on exynos5420 SMDK which has eDP panel > connected with resolution 2560x1600, following error occured even with > IOMMU enabled: > [0.880000] [drm:lowlevel_buffer_allocate] *ERROR* failed to allocate buffer. > [0.890000] [drm] Initialized exynos 1.0.0 20110530 on minor 0 > > To address the case where physically continous memory MAY NOT be a > mandatory requirement for fb, the patch adds a feature to get non physically > continous memory for fb if IOMMU is supported and if CONTIG memory allocation > fails. Reviewed-by: Rob Clark <robdclark@gmail.com> > > Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> > Signed-off-by: Arun Kumar <arun.kk@samsung.com> > --- > changes since v1: > - Modified to add the fallback patch if CONTIG alloc fails as suggested > by Rob Clark robdclark@gmail.com and Tomasz Figa <tomasz.figa@gmail.com>. > > - changed the commit message. > --- > drivers/gpu/drm/exynos/exynos_drm_fbdev.c | 19 +++++++++++++++---- > 1 file changed, 15 insertions(+), 4 deletions(-) > > diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c > index 8e60bd6..9a4b886 100644 > --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c > +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c > @@ -16,6 +16,7 @@ > #include <drm/drm_crtc.h> > #include <drm/drm_fb_helper.h> > #include <drm/drm_crtc_helper.h> > +#include <drm/exynos_drm.h> > > #include "exynos_drm_drv.h" > #include "exynos_drm_fb.h" > @@ -165,11 +166,21 @@ static int exynos_drm_fbdev_create(struct drm_fb_helper *helper, > > size = mode_cmd.pitches[0] * mode_cmd.height; > > - /* 0 means to allocate physically continuous memory */ > - exynos_gem_obj = exynos_drm_gem_create(dev, 0, size); > + exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_CONTIG, size); > if (IS_ERR(exynos_gem_obj)) { > - ret = PTR_ERR(exynos_gem_obj); > - goto err_release_framebuffer; > + /* > + * If IOMMU is supported then try to get buffer from > + * non-continous memory area > + */ > + if (is_drm_iommu_supported(dev)) > + exynos_gem_obj = exynos_drm_gem_create(dev, > + EXYNOS_BO_NONCONTIG, size); > + if (IS_ERR(exynos_gem_obj)) { > + ret = PTR_ERR(exynos_gem_obj); > + goto err_release_framebuffer; > + } > + dev_warn(&pdev->dev, "exynos_gem_obj for FB is allocated with\n" > + "non physically continuous memory\n"); > } > > exynos_fbdev->exynos_gem_obj = exynos_gem_obj; > -- > 1.7.9.5 > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Monday 05 of August 2013 15:14:42 Vikas Sajjan wrote: > While trying to get boot-logo up on exynos5420 SMDK which has eDP panel > connected with resolution 2560x1600, following error occured even with > IOMMU enabled: > [0.880000] [drm:lowlevel_buffer_allocate] *ERROR* failed to allocate > buffer. [0.890000] [drm] Initialized exynos 1.0.0 20110530 on minor 0 > > To address the case where physically continous memory MAY NOT be a > mandatory requirement for fb, the patch adds a feature to get non > physically continous memory for fb if IOMMU is supported and if CONTIG > memory allocation fails. > > Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> > Signed-off-by: Arun Kumar <arun.kk@samsung.com> > --- > changes since v1: > - Modified to add the fallback patch if CONTIG alloc fails as suggested > by Rob Clark robdclark@gmail.com and Tomasz Figa > <tomasz.figa@gmail.com>. > > - changed the commit message. > --- > drivers/gpu/drm/exynos/exynos_drm_fbdev.c | 19 +++++++++++++++---- > 1 file changed, 15 insertions(+), 4 deletions(-) > > diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c > b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c index 8e60bd6..9a4b886 > 100644 > --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c > +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c > @@ -16,6 +16,7 @@ > #include <drm/drm_crtc.h> > #include <drm/drm_fb_helper.h> > #include <drm/drm_crtc_helper.h> > +#include <drm/exynos_drm.h> > > #include "exynos_drm_drv.h" > #include "exynos_drm_fb.h" > @@ -165,11 +166,21 @@ static int exynos_drm_fbdev_create(struct > drm_fb_helper *helper, > > size = mode_cmd.pitches[0] * mode_cmd.height; > > - /* 0 means to allocate physically continuous memory */ > - exynos_gem_obj = exynos_drm_gem_create(dev, 0, size); > + exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_CONTIG, size); You can put the fallback here like this: if (IS_ERR(exynos_gem_obj) && is_drm_iommu_supported(dev)) { /* * If IOMMU is supported then try to get buffer from * non-continous memory area */ dev_warn(&pdev->dev, "contiguous FB allocation failed, falling back to non-contiguous\n"); exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_NONCONTIG, size); } > if (IS_ERR(exynos_gem_obj)) { > - ret = PTR_ERR(exynos_gem_obj); > - goto err_release_framebuffer; And then you can leave this original check untouched, reducing the diffstat and unnecessary code indentation. > + /* > + * If IOMMU is supported then try to get buffer from > + * non-continous memory area > + */ > + if (is_drm_iommu_supported(dev)) > + exynos_gem_obj = exynos_drm_gem_create(dev, > + EXYNOS_BO_NONCONTIG, size); > + if (IS_ERR(exynos_gem_obj)) { > + ret = PTR_ERR(exynos_gem_obj); > + goto err_release_framebuffer; > + } > + dev_warn(&pdev->dev, "exynos_gem_obj for FB is allocated with\n" > + "non physically continuous memory\n"); Please don't split messages into multiple lines, because this makes grepping for them harder (and checkpatch complains). Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c index 8e60bd6..9a4b886 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c @@ -16,6 +16,7 @@ #include <drm/drm_crtc.h> #include <drm/drm_fb_helper.h> #include <drm/drm_crtc_helper.h> +#include <drm/exynos_drm.h> #include "exynos_drm_drv.h" #include "exynos_drm_fb.h" @@ -165,11 +166,21 @@ static int exynos_drm_fbdev_create(struct drm_fb_helper *helper, size = mode_cmd.pitches[0] * mode_cmd.height; - /* 0 means to allocate physically continuous memory */ - exynos_gem_obj = exynos_drm_gem_create(dev, 0, size); + exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_CONTIG, size); if (IS_ERR(exynos_gem_obj)) { - ret = PTR_ERR(exynos_gem_obj); - goto err_release_framebuffer; + /* + * If IOMMU is supported then try to get buffer from + * non-continous memory area + */ + if (is_drm_iommu_supported(dev)) + exynos_gem_obj = exynos_drm_gem_create(dev, + EXYNOS_BO_NONCONTIG, size); + if (IS_ERR(exynos_gem_obj)) { + ret = PTR_ERR(exynos_gem_obj); + goto err_release_framebuffer; + } + dev_warn(&pdev->dev, "exynos_gem_obj for FB is allocated with\n" + "non physically continuous memory\n"); } exynos_fbdev->exynos_gem_obj = exynos_gem_obj;