| Message ID | 1375789924-10515-1-git-send-email-vikas.sajjan@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On 6 August 2013 17:22, Vikas Sajjan <vikas.sajjan@linaro.org> wrote: > While trying to get boot-logo up on exynos5420 SMDK which has eDP panel > connected with resolution 2560x1600, following error occured even with > IOMMU enabled: > [0.880000] [drm:lowlevel_buffer_allocate] *ERROR* failed to allocate buffer. > [0.890000] [drm] Initialized exynos 1.0.0 20110530 on minor 0 > > To address the cases where physically contiguous memory MAY NOT be a > mandatory requirement for fb, the patch adds a feature to get non physically > contiguous memory for fb if physically contiguous memory allocation fails > and if IOMMU is supported. > > Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> > Signed-off-by: Arun Kumar <arun.kk@samsung.com> > Reviewed-by: Rob Clark <robdclark@gmail.com> > --- > changes since v3: > - addressed nits pointed out by Sylwester Nawrocki <s.nawrocki@samsung.com> > and Sachin Kamat <sachin.kamat@linaro.org>. > > changes since v2: > - addressed comments given by Tomasz Figa <tomasz.figa@gmail.com>. > > changes since v1: > - Modified to add the fallback patch if CONTIG alloc fails as suggested > by Rob Clark robdclark@gmail.com and Tomasz Figa <tomasz.figa@gmail.com>. > > - changed the commit message. > --- > drivers/gpu/drm/exynos/exynos_drm_fbdev.c | 15 +++++++++++++-- > 1 file changed, 13 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c > index 8e60bd6..5292fc7 100644 > --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c > +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c > @@ -16,6 +16,7 @@ > #include <drm/drm_crtc.h> > #include <drm/drm_fb_helper.h> > #include <drm/drm_crtc_helper.h> > +#include <drm/exynos_drm.h> > > #include "exynos_drm_drv.h" > #include "exynos_drm_fb.h" > @@ -165,8 +166,18 @@ static int exynos_drm_fbdev_create(struct drm_fb_helper *helper, > > size = mode_cmd.pitches[0] * mode_cmd.height; > > - /* 0 means to allocate physically continuous memory */ > - exynos_gem_obj = exynos_drm_gem_create(dev, 0, size); > + exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_CONTIG, size); > + /* > + * If physically contiguous memory allocation fails and if IOMMU is > + * supported then try to get buffer from non physically contiguous > + * memory area. > + */ > + if (IS_ERR(exynos_gem_obj) && is_drm_iommu_supported(dev)) { > + dev_warn(&pdev->dev, "contiguous FB allocation failed, falling back to non-contiguous\n"); > + exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_NONCONTIG, > + size); > + } > + > if (IS_ERR(exynos_gem_obj)) { > ret = PTR_ERR(exynos_gem_obj); > goto err_release_framebuffer; > -- > 1.7.9.5 Looks good to me.
Hi Inki, On Tue, Aug 6, 2013 at 5:27 PM, Sachin Kamat <sachin.kamat@linaro.org> wrote: > On 6 August 2013 17:22, Vikas Sajjan <vikas.sajjan@linaro.org> wrote: >> While trying to get boot-logo up on exynos5420 SMDK which has eDP panel >> connected with resolution 2560x1600, following error occured even with >> IOMMU enabled: >> [0.880000] [drm:lowlevel_buffer_allocate] *ERROR* failed to allocate buffer. >> [0.890000] [drm] Initialized exynos 1.0.0 20110530 on minor 0 >> >> To address the cases where physically contiguous memory MAY NOT be a >> mandatory requirement for fb, the patch adds a feature to get non physically >> contiguous memory for fb if physically contiguous memory allocation fails >> and if IOMMU is supported. >> >> Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> >> Signed-off-by: Arun Kumar <arun.kk@samsung.com> >> Reviewed-by: Rob Clark <robdclark@gmail.com> >> --- >> changes since v3: >> - addressed nits pointed out by Sylwester Nawrocki <s.nawrocki@samsung.com> >> and Sachin Kamat <sachin.kamat@linaro.org>. >> >> changes since v2: >> - addressed comments given by Tomasz Figa <tomasz.figa@gmail.com>. >> >> changes since v1: >> - Modified to add the fallback patch if CONTIG alloc fails as suggested >> by Rob Clark robdclark@gmail.com and Tomasz Figa <tomasz.figa@gmail.com>. >> >> - changed the commit message. >> --- >> drivers/gpu/drm/exynos/exynos_drm_fbdev.c | 15 +++++++++++++-- >> 1 file changed, 13 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c >> index 8e60bd6..5292fc7 100644 >> --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c >> +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c >> @@ -16,6 +16,7 @@ >> #include <drm/drm_crtc.h> >> #include <drm/drm_fb_helper.h> >> #include <drm/drm_crtc_helper.h> >> +#include <drm/exynos_drm.h> >> >> #include "exynos_drm_drv.h" >> #include "exynos_drm_fb.h" >> @@ -165,8 +166,18 @@ static int exynos_drm_fbdev_create(struct drm_fb_helper *helper, >> >> size = mode_cmd.pitches[0] * mode_cmd.height; >> >> - /* 0 means to allocate physically continuous memory */ >> - exynos_gem_obj = exynos_drm_gem_create(dev, 0, size); >> + exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_CONTIG, size); >> + /* >> + * If physically contiguous memory allocation fails and if IOMMU is >> + * supported then try to get buffer from non physically contiguous >> + * memory area. >> + */ >> + if (IS_ERR(exynos_gem_obj) && is_drm_iommu_supported(dev)) { >> + dev_warn(&pdev->dev, "contiguous FB allocation failed, falling back to non-contiguous\n"); >> + exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_NONCONTIG, >> + size); >> + } >> + >> if (IS_ERR(exynos_gem_obj)) { >> ret = PTR_ERR(exynos_gem_obj); >> goto err_release_framebuffer; >> -- >> 1.7.9.5 > > Looks good to me. > Can you apply this patch. > -- > With warm regards, > Sachin > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> -----Original Message----- > From: linux-samsung-soc-owner@vger.kernel.org [mailto:linux-samsung-soc- > owner@vger.kernel.org] On Behalf Of Vikas Sajjan > Sent: Wednesday, August 07, 2013 1:11 PM > To: Sachin Kamat > Cc: Vikas Sajjan; linux-samsung-soc; dri-devel@lists.freedesktop.org; > Kukjin Kim; InKi Dae; s.nawrocki@samsung.com; Marek Szyprowski; Tomasz > Figa; Rob Clark; arun.kk@samsung.com; patches@linaro.org; linaro- > kernel@lists.linaro.org; sunil joshi > Subject: Re: [PATCH v4] drm/exynos: Add fallback option to get non > physically contiguous memory for fb > > Hi Inki, > > On Tue, Aug 6, 2013 at 5:27 PM, Sachin Kamat <sachin.kamat@linaro.org> > wrote: > > On 6 August 2013 17:22, Vikas Sajjan <vikas.sajjan@linaro.org> wrote: > >> While trying to get boot-logo up on exynos5420 SMDK which has eDP panel > >> connected with resolution 2560x1600, following error occured even with > >> IOMMU enabled: > >> [0.880000] [drm:lowlevel_buffer_allocate] *ERROR* failed to allocate > buffer. > >> [0.890000] [drm] Initialized exynos 1.0.0 20110530 on minor 0 > >> > >> To address the cases where physically contiguous memory MAY NOT be a > >> mandatory requirement for fb, the patch adds a feature to get non > physically > >> contiguous memory for fb if physically contiguous memory allocation > fails > >> and if IOMMU is supported. > >> > >> Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> > >> Signed-off-by: Arun Kumar <arun.kk@samsung.com> > >> Reviewed-by: Rob Clark <robdclark@gmail.com> > >> --- > >> changes since v3: > >> - addressed nits pointed out by Sylwester Nawrocki > <s.nawrocki@samsung.com> > >> and Sachin Kamat <sachin.kamat@linaro.org>. > >> > >> changes since v2: > >> - addressed comments given by Tomasz Figa <tomasz.figa@gmail.com>. > >> > >> changes since v1: > >> - Modified to add the fallback patch if CONTIG alloc fails as > suggested > >> by Rob Clark robdclark@gmail.com and Tomasz Figa > <tomasz.figa@gmail.com>. > >> > >> - changed the commit message. > >> --- > >> drivers/gpu/drm/exynos/exynos_drm_fbdev.c | 15 +++++++++++++-- > >> 1 file changed, 13 insertions(+), 2 deletions(-) > >> > >> diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c > b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c > >> index 8e60bd6..5292fc7 100644 > >> --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c > >> +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c > >> @@ -16,6 +16,7 @@ > >> #include <drm/drm_crtc.h> > >> #include <drm/drm_fb_helper.h> > >> #include <drm/drm_crtc_helper.h> > >> +#include <drm/exynos_drm.h> > >> > >> #include "exynos_drm_drv.h" > >> #include "exynos_drm_fb.h" > >> @@ -165,8 +166,18 @@ static int exynos_drm_fbdev_create(struct > drm_fb_helper *helper, > >> > >> size = mode_cmd.pitches[0] * mode_cmd.height; > >> > >> - /* 0 means to allocate physically continuous memory */ > >> - exynos_gem_obj = exynos_drm_gem_create(dev, 0, size); > >> + exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_CONTIG, > size); > >> + /* > >> + * If physically contiguous memory allocation fails and if IOMMU > is > >> + * supported then try to get buffer from non physically > contiguous > >> + * memory area. > >> + */ > >> + if (IS_ERR(exynos_gem_obj) && is_drm_iommu_supported(dev)) { > >> + dev_warn(&pdev->dev, "contiguous FB allocation failed, > falling back to non-contiguous\n"); > >> + exynos_gem_obj = exynos_drm_gem_create(dev, > EXYNOS_BO_NONCONTIG, > >> + size); > >> + } > >> + > >> if (IS_ERR(exynos_gem_obj)) { > >> ret = PTR_ERR(exynos_gem_obj); > >> goto err_release_framebuffer; > >> -- > >> 1.7.9.5 > > > > Looks good to me. > > > > Can you apply this patch. Looks good to me. Applied. Thanks, Inki Dae > > > > -- > > With warm regards, > > Sachin > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-samsung- > soc" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung- > soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Inki Dae, On 7 August 2013 10:18, Inki Dae <inki.dae@samsung.com> wrote: > > >> -----Original Message----- >> From: linux-samsung-soc-owner@vger.kernel.org [mailto:linux-samsung-soc- >> owner@vger.kernel.org] On Behalf Of Vikas Sajjan >> Sent: Wednesday, August 07, 2013 1:11 PM >> To: Sachin Kamat >> Cc: Vikas Sajjan; linux-samsung-soc; dri-devel@lists.freedesktop.org; >> Kukjin Kim; InKi Dae; s.nawrocki@samsung.com; Marek Szyprowski; Tomasz >> Figa; Rob Clark; arun.kk@samsung.com; patches@linaro.org; linaro- >> kernel@lists.linaro.org; sunil joshi >> Subject: Re: [PATCH v4] drm/exynos: Add fallback option to get non >> physically contiguous memory for fb >> >> Hi Inki, >> >> On Tue, Aug 6, 2013 at 5:27 PM, Sachin Kamat <sachin.kamat@linaro.org> >> wrote: >> > On 6 August 2013 17:22, Vikas Sajjan <vikas.sajjan@linaro.org> wrote: >> >> While trying to get boot-logo up on exynos5420 SMDK which has eDP panel >> >> connected with resolution 2560x1600, following error occured even with >> >> IOMMU enabled: >> >> [0.880000] [drm:lowlevel_buffer_allocate] *ERROR* failed to allocate >> buffer. >> >> [0.890000] [drm] Initialized exynos 1.0.0 20110530 on minor 0 >> >> >> >> To address the cases where physically contiguous memory MAY NOT be a >> >> mandatory requirement for fb, the patch adds a feature to get non >> physically >> >> contiguous memory for fb if physically contiguous memory allocation >> fails >> >> and if IOMMU is supported. >> >> >> >> Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> >> >> Signed-off-by: Arun Kumar <arun.kk@samsung.com> >> >> Reviewed-by: Rob Clark <robdclark@gmail.com> >> >> --- >> >> changes since v3: >> >> - addressed nits pointed out by Sylwester Nawrocki >> <s.nawrocki@samsung.com> >> >> and Sachin Kamat <sachin.kamat@linaro.org>. >> >> >> >> changes since v2: >> >> - addressed comments given by Tomasz Figa > <tomasz.figa@gmail.com>. >> >> >> >> changes since v1: >> >> - Modified to add the fallback patch if CONTIG alloc fails as >> suggested >> >> by Rob Clark robdclark@gmail.com and Tomasz Figa >> <tomasz.figa@gmail.com>. >> >> >> >> - changed the commit message. >> >> --- >> >> drivers/gpu/drm/exynos/exynos_drm_fbdev.c | 15 +++++++++++++-- >> >> 1 file changed, 13 insertions(+), 2 deletions(-) >> >> >> >> diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c >> b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c >> >> index 8e60bd6..5292fc7 100644 >> >> --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c >> >> +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c >> >> @@ -16,6 +16,7 @@ >> >> #include <drm/drm_crtc.h> >> >> #include <drm/drm_fb_helper.h> >> >> #include <drm/drm_crtc_helper.h> >> >> +#include <drm/exynos_drm.h> >> >> >> >> #include "exynos_drm_drv.h" >> >> #include "exynos_drm_fb.h" >> >> @@ -165,8 +166,18 @@ static int exynos_drm_fbdev_create(struct >> drm_fb_helper *helper, >> >> >> >> size = mode_cmd.pitches[0] * mode_cmd.height; >> >> >> >> - /* 0 means to allocate physically continuous memory */ >> >> - exynos_gem_obj = exynos_drm_gem_create(dev, 0, size); >> >> + exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_CONTIG, >> size); >> >> + /* >> >> + * If physically contiguous memory allocation fails and if > IOMMU >> is >> >> + * supported then try to get buffer from non physically >> contiguous >> >> + * memory area. >> >> + */ >> >> + if (IS_ERR(exynos_gem_obj) && is_drm_iommu_supported(dev)) { >> >> + dev_warn(&pdev->dev, "contiguous FB allocation failed, >> falling back to non-contiguous\n"); >> >> + exynos_gem_obj = exynos_drm_gem_create(dev, >> EXYNOS_BO_NONCONTIG, >> >> + size); >> >> + } >> >> + >> >> if (IS_ERR(exynos_gem_obj)) { >> >> ret = PTR_ERR(exynos_gem_obj); >> >> goto err_release_framebuffer; >> >> -- >> >> 1.7.9.5 >> > >> > Looks good to me. >> > >> >> Can you apply this patch. > > Looks good to me. Applied. > Thanks. > Thanks, > Inki Dae > >> >> >> > -- >> > With warm regards, >> > Sachin >> > -- >> > To unsubscribe from this list: send the line "unsubscribe linux-samsung- >> soc" in >> > the body of a message to majordomo@vger.kernel.org >> > More majordomo info at http://vger.kernel.org/majordomo-info.html >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-samsung- >> soc" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c index 8e60bd6..5292fc7 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c @@ -16,6 +16,7 @@ #include <drm/drm_crtc.h> #include <drm/drm_fb_helper.h> #include <drm/drm_crtc_helper.h> +#include <drm/exynos_drm.h> #include "exynos_drm_drv.h" #include "exynos_drm_fb.h" @@ -165,8 +166,18 @@ static int exynos_drm_fbdev_create(struct drm_fb_helper *helper, size = mode_cmd.pitches[0] * mode_cmd.height; - /* 0 means to allocate physically continuous memory */ - exynos_gem_obj = exynos_drm_gem_create(dev, 0, size); + exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_CONTIG, size); + /* + * If physically contiguous memory allocation fails and if IOMMU is + * supported then try to get buffer from non physically contiguous + * memory area. + */ + if (IS_ERR(exynos_gem_obj) && is_drm_iommu_supported(dev)) { + dev_warn(&pdev->dev, "contiguous FB allocation failed, falling back to non-contiguous\n"); + exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_NONCONTIG, + size); + } + if (IS_ERR(exynos_gem_obj)) { ret = PTR_ERR(exynos_gem_obj); goto err_release_framebuffer;