diff mbox

ARM: dts: Add dwmmc DT nodes for exynos5420 SOC

Message ID 1376894399-2766-1-git-send-email-yuvaraj.cd@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Yuvaraj CD Aug. 19, 2013, 6:39 a.m. UTC
This patch adds the device tree node entries for exynos5420 SOC.
Exynos5420 has a different version of DWMMC controller,so a new
compatible string is used to distinguish it from the prior SOC's.

Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
---
 .../devicetree/bindings/mmc/exynos-dw-mshc.txt     |    2 +
 arch/arm/boot/dts/exynos5420-smdk5420.dts          |   41 ++++++++++++++++++++
 arch/arm/boot/dts/exynos5420.dtsi                  |   33 ++++++++++++++++
 3 files changed, 76 insertions(+)

Comments

Vikas Sajjan Aug. 19, 2013, 10:17 a.m. UTC | #1
Hi Yuvaraj,

On Mon, Aug 19, 2013 at 12:09 PM, Yuvaraj Kumar C D
<yuvaraj.cd@gmail.com> wrote:
> This patch adds the device tree node entries for exynos5420 SOC.
> Exynos5420 has a different version of DWMMC controller,so a new
> compatible string is used to distinguish it from the prior SOC's.
>
> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
> ---
>  .../devicetree/bindings/mmc/exynos-dw-mshc.txt     |    2 +
>  arch/arm/boot/dts/exynos5420-smdk5420.dts          |   41 ++++++++++++++++++++
>  arch/arm/boot/dts/exynos5420.dtsi                  |   33 ++++++++++++++++
>  3 files changed, 76 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> index 6d1c098..84cd56f 100644
> --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
> @@ -16,6 +16,8 @@ Required Properties:
>           specific extensions.
>         - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
>           specific extensions.
> +       - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
> +         specific extensions.
>
>  * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
>    unit (ciu) clock. This property is applicable only for Exynos5 SoC's and
> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> index 08607df..4530700 100644
> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> @@ -30,4 +30,45 @@
>                         clock-frequency = <24000000>;
>                 };
>         };
> +
> +       dwmmc0@12200000 {
> +               num-slots = <1>;
> +               broken-cd;
> +               bypass-smu;
> +               supports-highspeed;
> +               fifo-depth = <0x80>;
> +               card-detect-delay = <200>;
> +               samsung,dw-mshc-ciu-div = <3>;
> +               samsung,dw-mshc-sdr-timing = <0 4>;
> +               samsung,dw-mshc-ddr-timing = <0 2>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
> +
> +               slot@0 {
> +                       reg = <0>;
> +                       bus-width = <8>;
> +               };
> +       };

with these bindings if the MMC is operational, then IMHO its better to
make its status as "okay".

> +
> +       dwmmc1@12210000 {
> +               status = "disabled";
> +       };
> +
> +       dwmmc2@12220000 {

 ditto.

> +               num-slots = <1>;
> +               supports-highspeed;
> +               fifo-depth = <0x80>;
> +               card-detect-delay = <200>;
> +               samsung,dw-mshc-ciu-div = <3>;
> +               samsung,dw-mshc-sdr-timing = <2 3>;
> +               samsung,dw-mshc-ddr-timing = <1 2>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
> +
> +               slot@0 {
> +                       reg = <0>;
> +                       bus-width = <4>;
> +               };
> +       };
> +
>  };
> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> index 9e90d1e..8559aa8 100644
> --- a/arch/arm/boot/dts/exynos5420.dtsi
> +++ b/arch/arm/boot/dts/exynos5420.dtsi
> @@ -19,6 +19,9 @@
>         compatible = "samsung,exynos5420";
>
>         aliases {
> +               mshc0 = &dwmmc_0;
> +               mshc1 = &dwmmc_1;
> +               mshc2 = &dwmmc_2;
>                 pinctrl0 = &pinctrl_0;
>                 pinctrl1 = &pinctrl_1;
>                 pinctrl2 = &pinctrl_2;
> @@ -65,6 +68,36 @@
>                 #clock-cells = <1>;
>         };
>
> +       dwmmc_0: dwmmc0@12200000 {
> +               compatible = "samsung,exynos5420-dw-mshc";
> +               interrupts = <0 75 0>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               reg = <0x12200000 0x2000>;
> +               clocks = <&clock 351>, <&clock 132>;
> +               clock-names = "biu", "ciu";

with these bindings if the MMC is NOT operational yet, then IMHO its
better to make its status as "disabled".

> +       };
> +
> +       dwmmc_1: dwmmc1@12210000 {
> +               compatible = "samsung,exynos5420-dw-mshc";
> +               interrupts = <0 76 0>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               reg = <0x12210000 0x2000>;
> +               clocks = <&clock 352>, <&clock 133>;
> +               clock-names = "biu", "ciu";

ditto.

> +       };
> +
> +       dwmmc_2: dwmmc2@12220000 {
> +               compatible = "samsung,exynos5420-dw-mshc";
> +               interrupts = <0 77 0>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               reg = <0x12220000 0x2000>;
> +               clocks = <&clock 353>, <&clock 134>;
> +               clock-names = "biu", "ciu";

ditto.

> +       };
> +
>         mct@101C0000 {
>                 compatible = "samsung,exynos4210-mct";
>                 reg = <0x101C0000 0x800>;
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
index 6d1c098..84cd56f 100644
--- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
@@ -16,6 +16,8 @@  Required Properties:
 	  specific extensions.
 	- "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
 	  specific extensions.
+	- "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
+	  specific extensions.
 
 * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
   unit (ciu) clock. This property is applicable only for Exynos5 SoC's and
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 08607df..4530700 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -30,4 +30,45 @@ 
 			clock-frequency = <24000000>;
 		};
 	};
+
+	dwmmc0@12200000 {
+		num-slots = <1>;
+		broken-cd;
+		bypass-smu;
+		supports-highspeed;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <0 4>;
+		samsung,dw-mshc-ddr-timing = <0 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+		};
+	};
+
+	dwmmc1@12210000 {
+		status = "disabled";
+	};
+
+	dwmmc2@12220000 {
+		num-slots = <1>;
+		supports-highspeed;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <4>;
+		};
+	};
+
 };
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 9e90d1e..8559aa8 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -19,6 +19,9 @@ 
 	compatible = "samsung,exynos5420";
 
 	aliases {
+		mshc0 = &dwmmc_0;
+		mshc1 = &dwmmc_1;
+		mshc2 = &dwmmc_2;
 		pinctrl0 = &pinctrl_0;
 		pinctrl1 = &pinctrl_1;
 		pinctrl2 = &pinctrl_2;
@@ -65,6 +68,36 @@ 
 		#clock-cells = <1>;
 	};
 
+	dwmmc_0: dwmmc0@12200000 {
+		compatible = "samsung,exynos5420-dw-mshc";
+		interrupts = <0 75 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x12200000 0x2000>;
+		clocks = <&clock 351>, <&clock 132>;
+		clock-names = "biu", "ciu";
+	};
+
+	dwmmc_1: dwmmc1@12210000 {
+		compatible = "samsung,exynos5420-dw-mshc";
+		interrupts = <0 76 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x12210000 0x2000>;
+		clocks = <&clock 352>, <&clock 133>;
+		clock-names = "biu", "ciu";
+	};
+
+	dwmmc_2: dwmmc2@12220000 {
+		compatible = "samsung,exynos5420-dw-mshc";
+		interrupts = <0 77 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x12220000 0x2000>;
+		clocks = <&clock 353>, <&clock 134>;
+		clock-names = "biu", "ciu";
+	};
+
 	mct@101C0000 {
 		compatible = "samsung,exynos4210-mct";
 		reg = <0x101C0000 0x800>;