| Message ID | 1377687641-15376-1-git-send-email-chander.kashyap@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Chander, On Wednesday 28 of August 2013 16:30:41 Chander Kashyap wrote: > Two cells were used to specify interrupts in mct node, while second cell > always remains unused. Hence use only one cell. > Suggested by Tomasz Figa. > > Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> > --- > changes in v2: > - Drop Changes for Exynos4 as done in separate patch by Tomasz > > arch/arm/boot/dts/exynos5250.dtsi | 19 +++++++++---------- > 1 file changed, 9 insertions(+), 10 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos5250.dtsi > b/arch/arm/boot/dts/exynos5250.dtsi index ef57277..f2f178a 100644 > --- a/arch/arm/boot/dts/exynos5250.dtsi > +++ b/arch/arm/boot/dts/exynos5250.dtsi > @@ -102,23 +102,22 @@ > compatible = "samsung,exynos4210-mct"; > reg = <0x101C0000 0x800>; > interrupt-controller; > - #interrups-cells = <2>; > + #interrups-cells = <1>; Those two properties above are unused and in fact incorrect, because MCT is not an interrupt controller, so they could be removed in a follow-up patch. You can also check out the clean-up series I mentioned for other things that could be cleaned up in Exynos 5 dtsi files. > interrupt-parent = <&mct_map>; > - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, > - <4 0>, <5 0>; > + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; > clocks = <&clock 1>, <&clock 335>; > clock-names = "fin_pll", "mct"; > > mct_map: mct-map { > - #interrupt-cells = <2>; > + #interrupt-cells = <1>; > #address-cells = <0>; > #size-cells = <0>; > - interrupt-map = <0x0 0 &combiner 23 3>, > - <0x1 0 &combiner 23 4>, > - <0x2 0 &combiner 25 2>, > - <0x3 0 &combiner 25 3>, > - <0x4 0 &gic 0 120 0>, > - <0x5 0 &gic 0 121 0>; > + interrupt-map = <0 &combiner 23 3>, > + <1 &combiner 23 4>, > + <2 &combiner 25 2>, > + <3 &combiner 25 3>, > + <4 &gic 0 120 0>, > + <5 &gic 0 121 0>; > }; > }; Otherwise, looks fine. Thanks. Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 28 August 2013 16:48, Tomasz Figa <t.figa@samsung.com> wrote: > Hi Chander, > > On Wednesday 28 of August 2013 16:30:41 Chander Kashyap wrote: >> Two cells were used to specify interrupts in mct node, while second cell >> always remains unused. Hence use only one cell. >> Suggested by Tomasz Figa. >> >> Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> >> --- >> changes in v2: >> - Drop Changes for Exynos4 as done in separate patch by Tomasz >> >> arch/arm/boot/dts/exynos5250.dtsi | 19 +++++++++---------- >> 1 file changed, 9 insertions(+), 10 deletions(-) >> >> diff --git a/arch/arm/boot/dts/exynos5250.dtsi >> b/arch/arm/boot/dts/exynos5250.dtsi index ef57277..f2f178a 100644 >> --- a/arch/arm/boot/dts/exynos5250.dtsi >> +++ b/arch/arm/boot/dts/exynos5250.dtsi >> @@ -102,23 +102,22 @@ >> compatible = "samsung,exynos4210-mct"; >> reg = <0x101C0000 0x800>; >> interrupt-controller; >> - #interrups-cells = <2>; >> + #interrups-cells = <1>; > > Those two properties above are unused and in fact incorrect, because MCT is > not an interrupt controller, so they could be removed in a follow-up patch. Thanks for the correction. I will remove them. > > You can also check out the clean-up series I mentioned for other things > that could be cleaned up in Exynos 5 dtsi files. ok > >> interrupt-parent = <&mct_map>; >> - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, >> - <4 0>, <5 0>; >> + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; >> clocks = <&clock 1>, <&clock 335>; >> clock-names = "fin_pll", "mct"; >> >> mct_map: mct-map { >> - #interrupt-cells = <2>; >> + #interrupt-cells = <1>; >> #address-cells = <0>; >> #size-cells = <0>; >> - interrupt-map = <0x0 0 &combiner 23 3>, >> - <0x1 0 &combiner 23 4>, >> - <0x2 0 &combiner 25 2>, >> - <0x3 0 &combiner 25 3>, >> - <0x4 0 &gic 0 120 0>, >> - <0x5 0 &gic 0 121 0>; >> + interrupt-map = <0 &combiner 23 3>, >> + <1 &combiner 23 4>, >> + <2 &combiner 25 2>, >> + <3 &combiner 25 3>, >> + <4 &gic 0 120 0>, >> + <5 &gic 0 121 0>; >> }; >> }; > > Otherwise, looks fine. Thanks. Thanks > > Best regards, > Tomasz >
Ki Kukjin, On 28 August 2013 17:36, Chander Kashyap <chander.kashyap@linaro.org> wrote: > On 28 August 2013 16:48, Tomasz Figa <t.figa@samsung.com> wrote: >> Hi Chander, >> >> On Wednesday 28 of August 2013 16:30:41 Chander Kashyap wrote: >>> Two cells were used to specify interrupts in mct node, while second cell >>> always remains unused. Hence use only one cell. >>> Suggested by Tomasz Figa. >>> >>> Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> >>> --- >>> changes in v2: >>> - Drop Changes for Exynos4 as done in separate patch by Tomasz >>> >>> arch/arm/boot/dts/exynos5250.dtsi | 19 +++++++++---------- >>> 1 file changed, 9 insertions(+), 10 deletions(-) >>> >>> diff --git a/arch/arm/boot/dts/exynos5250.dtsi >>> b/arch/arm/boot/dts/exynos5250.dtsi index ef57277..f2f178a 100644 >>> --- a/arch/arm/boot/dts/exynos5250.dtsi >>> +++ b/arch/arm/boot/dts/exynos5250.dtsi >>> @@ -102,23 +102,22 @@ >>> compatible = "samsung,exynos4210-mct"; >>> reg = <0x101C0000 0x800>; >>> interrupt-controller; >>> - #interrups-cells = <2>; >>> + #interrups-cells = <1>; >> >> Those two properties above are unused and in fact incorrect, because MCT is >> not an interrupt controller, so they could be removed in a follow-up patch. > > Thanks for the correction. I will remove them. > >> >> You can also check out the clean-up series I mentioned for other things >> that could be cleaned up in Exynos 5 dtsi files. > > ok > >> >>> interrupt-parent = <&mct_map>; >>> - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, >>> - <4 0>, <5 0>; >>> + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; >>> clocks = <&clock 1>, <&clock 335>; >>> clock-names = "fin_pll", "mct"; >>> >>> mct_map: mct-map { >>> - #interrupt-cells = <2>; >>> + #interrupt-cells = <1>; >>> #address-cells = <0>; >>> #size-cells = <0>; >>> - interrupt-map = <0x0 0 &combiner 23 3>, >>> - <0x1 0 &combiner 23 4>, >>> - <0x2 0 &combiner 25 2>, >>> - <0x3 0 &combiner 25 3>, >>> - <0x4 0 &gic 0 120 0>, >>> - <0x5 0 &gic 0 121 0>; >>> + interrupt-map = <0 &combiner 23 3>, >>> + <1 &combiner 23 4>, >>> + <2 &combiner 25 2>, >>> + <3 &combiner 25 3>, >>> + <4 &gic 0 120 0>, >>> + <5 &gic 0 121 0>; >>> }; >>> }; >> >> Otherwise, looks fine. Thanks. > > Thanks > Kindly Ignore this patch, i will send it with another patch series. >> >> Best regards, >> Tomasz >> > > > > -- > with warm regards, > Chander Kashyap
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index ef57277..f2f178a 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -102,23 +102,22 @@ compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; interrupt-controller; - #interrups-cells = <2>; + #interrups-cells = <1>; interrupt-parent = <&mct_map>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, - <4 0>, <5 0>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; clocks = <&clock 1>, <&clock 335>; clock-names = "fin_pll", "mct"; mct_map: mct-map { - #interrupt-cells = <2>; + #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = <0x0 0 &combiner 23 3>, - <0x1 0 &combiner 23 4>, - <0x2 0 &combiner 25 2>, - <0x3 0 &combiner 25 3>, - <0x4 0 &gic 0 120 0>, - <0x5 0 &gic 0 121 0>; + interrupt-map = <0 &combiner 23 3>, + <1 &combiner 23 4>, + <2 &combiner 25 2>, + <3 &combiner 25 3>, + <4 &gic 0 120 0>, + <5 &gic 0 121 0>; }; };
Two cells were used to specify interrupts in mct node, while second cell always remains unused. Hence use only one cell. Suggested by Tomasz Figa. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> --- changes in v2: - Drop Changes for Exynos4 as done in separate patch by Tomasz arch/arm/boot/dts/exynos5250.dtsi | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-)