| Message ID | 1377754827-31786-2-git-send-email-rahul.sharma@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thursday 29 of August 2013 11:10:21 Rahul Sharma wrote: > Adding information about clocks to the binding documentation > for exynos mixer and hdmi. > > Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> > --- > Documentation/devicetree/bindings/video/exynos_hdmi.txt | 15 > ++++++++++++++- .../devicetree/bindings/video/exynos_mixer.txt > | 4 ++++ 2 files changed, 18 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt > b/Documentation/devicetree/bindings/video/exynos_hdmi.txt index > 323983b..1878418 100644 > --- a/Documentation/devicetree/bindings/video/exynos_hdmi.txt > +++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt > @@ -12,7 +12,20 @@ Required properties: > a) phandle of the gpio controller node. > b) pin number within the gpio controller. > c) optional flags and pull up/down. > - > +- clocks: list of clock IDs from SoC clock driver. > + a) hdmi: It is required for gate operation on aclk_200_disp1 clock > + which clocks the display1 block. The "aclk_200_disp1" name is valid only on Exynos 5, but this binding is generic for all Exynos SoCs and probably also previous S5P SoCs. I believe that "Gate of HDMI IP bus clock." would be appropriate here. Otherwise, this patch looks good to me. Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt index 323983b..1878418 100644 --- a/Documentation/devicetree/bindings/video/exynos_hdmi.txt +++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt @@ -12,7 +12,20 @@ Required properties: a) phandle of the gpio controller node. b) pin number within the gpio controller. c) optional flags and pull up/down. - +- clocks: list of clock IDs from SoC clock driver. + a) hdmi: It is required for gate operation on aclk_200_disp1 clock + which clocks the display1 block. + b) sclk_hdmi: Gate of HDMI special clock. + c) sclk_pixel: Pixel special clock, one of the two possible inputs of + HDMI clock mux. + d) sclk_hdmiphy: HDMI PHY clock output, one of two possible inputs of + HDMI clock mux. + e) mout_hdmi: It is required by the driver to switch between the 2 + parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable + after configuration, parent is set to sclk_hdmiphy else + sclk_pixel. +- clock-names: aliases as per driver requirements for above clock IDs: + "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi". Example: hdmi { diff --git a/Documentation/devicetree/bindings/video/exynos_mixer.txt b/Documentation/devicetree/bindings/video/exynos_mixer.txt index 3334b0a..7bfde9c 100644 --- a/Documentation/devicetree/bindings/video/exynos_mixer.txt +++ b/Documentation/devicetree/bindings/video/exynos_mixer.txt @@ -10,6 +10,10 @@ Required properties: - reg: physical base address of the mixer and length of memory mapped region. - interrupts: interrupt number to the cpu. +- clocks: list of clock IDs from SoC clock driver. + a) mixer: Gate of Mixer IP bus clock. + b) sclk_hdmi: HDMI Special clock, one of the two possible inputs of + mixer mux. Example:
Adding information about clocks to the binding documentation for exynos mixer and hdmi. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> --- Documentation/devicetree/bindings/video/exynos_hdmi.txt | 15 ++++++++++++++- .../devicetree/bindings/video/exynos_mixer.txt | 4 ++++ 2 files changed, 18 insertions(+), 1 deletion(-)