| Message ID | 1381470134-29410-1-git-send-email-amit.daniel@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Amit, On Friday 11 of October 2013 11:12:14 Amit Daniel Kachhap wrote: > Now with common clock support added for exynos5250 it is necessary to move > this code to exynos5250 common clock driver as clock registers should be > handled there. This change is tested in exynos5250 based arndale platform. > > Cc: Abhilash Kesavan <a.kesavan@samsung.com> > Cc: Thomas Abraham <thomas.abraham@linaro.org> > Acked-by: Kukjin Kim <kgene.kim@samsugn.com> nit: Typo in samsung. Probably something that Kukjin can fix up when applying, though. > Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> > Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> > --- > > Changes in V2: > * Rebased against linux-next tree. > * Removed un-used macros in regs-clock.h > > arch/arm/mach-exynos/cpuidle.c | 35 -------------------- > arch/arm/mach-exynos/include/mach/regs-clock.h | 16 --------- > drivers/clk/samsung/clk-exynos5250.c | 42 ++++++++++++++++++++++++ > 3 files changed, 42 insertions(+), 51 deletions(-) Otherwise Acked-by: Tomasz Figa <t.figa@samsung.com> Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 10/11/13 16:33, Tomasz Figa wrote: > Hi Amit, > > On Friday 11 of October 2013 11:12:14 Amit Daniel Kachhap wrote: >> Now with common clock support added for exynos5250 it is necessary to move >> this code to exynos5250 common clock driver as clock registers should be >> handled there. This change is tested in exynos5250 based arndale platform. >> >> Cc: Abhilash Kesavan<a.kesavan@samsung.com> >> Cc: Thomas Abraham<thomas.abraham@linaro.org> >> Acked-by: Kukjin Kim<kgene.kim@samsugn.com> > > nit: Typo in samsung. Probably something that Kukjin can fix up when > applying, though. > >> Reviewed-by: Bartlomiej Zolnierkiewicz<b.zolnierkie@samsung.com> >> Signed-off-by: Amit Daniel Kachhap<amit.daniel@samsung.com> >> --- >> >> Changes in V2: >> * Rebased against linux-next tree. >> * Removed un-used macros in regs-clock.h >> >> arch/arm/mach-exynos/cpuidle.c | 35 -------------------- >> arch/arm/mach-exynos/include/mach/regs-clock.h | 16 --------- >> drivers/clk/samsung/clk-exynos5250.c | 42 ++++++++++++++++++++++++ >> 3 files changed, 42 insertions(+), 51 deletions(-) > > Otherwise > > Acked-by: Tomasz Figa<t.figa@samsung.com> > Mike, do you want me to pick this patch into Samsung tree? - Kukjin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoting Kukjin Kim (2013-10-20 14:34:29) > On 10/11/13 16:33, Tomasz Figa wrote: > > Hi Amit, > > > > On Friday 11 of October 2013 11:12:14 Amit Daniel Kachhap wrote: > >> Now with common clock support added for exynos5250 it is necessary to move > >> this code to exynos5250 common clock driver as clock registers should be > >> handled there. This change is tested in exynos5250 based arndale platform. > >> > >> Cc: Abhilash Kesavan<a.kesavan@samsung.com> > >> Cc: Thomas Abraham<thomas.abraham@linaro.org> > >> Acked-by: Kukjin Kim<kgene.kim@samsugn.com> > > > > nit: Typo in samsung. Probably something that Kukjin can fix up when > > applying, though. > > > >> Reviewed-by: Bartlomiej Zolnierkiewicz<b.zolnierkie@samsung.com> > >> Signed-off-by: Amit Daniel Kachhap<amit.daniel@samsung.com> > >> --- > >> > >> Changes in V2: > >> * Rebased against linux-next tree. > >> * Removed un-used macros in regs-clock.h > >> > >> arch/arm/mach-exynos/cpuidle.c | 35 -------------------- > >> arch/arm/mach-exynos/include/mach/regs-clock.h | 16 --------- > >> drivers/clk/samsung/clk-exynos5250.c | 42 ++++++++++++++++++++++++ > >> 3 files changed, 42 insertions(+), 51 deletions(-) > > > > Otherwise > > > > Acked-by: Tomasz Figa<t.figa@samsung.com> > > > Mike, do you want me to pick this patch into Samsung tree? I'll take it through clk-next. Thanks, Mike > > - Kukjin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c index 1bde6ad..40963ce 100644 --- a/arch/arm/mach-exynos/cpuidle.c +++ b/arch/arm/mach-exynos/cpuidle.c @@ -161,46 +161,11 @@ static int exynos4_enter_lowpower(struct cpuidle_device *dev, return exynos4_enter_core0_aftr(dev, drv, new_index); } -static void __init exynos5_core_down_clk(void) -{ - unsigned int tmp; - - /* - * Enable arm clock down (in idle) and set arm divider - * ratios in WFI/WFE state. - */ - tmp = PWR_CTRL1_CORE2_DOWN_RATIO | \ - PWR_CTRL1_CORE1_DOWN_RATIO | \ - PWR_CTRL1_DIV2_DOWN_EN | \ - PWR_CTRL1_DIV1_DOWN_EN | \ - PWR_CTRL1_USE_CORE1_WFE | \ - PWR_CTRL1_USE_CORE0_WFE | \ - PWR_CTRL1_USE_CORE1_WFI | \ - PWR_CTRL1_USE_CORE0_WFI; - __raw_writel(tmp, EXYNOS5_PWR_CTRL1); - - /* - * Enable arm clock up (on exiting idle). Set arm divider - * ratios when not in idle along with the standby duration - * ratios. - */ - tmp = PWR_CTRL2_DIV2_UP_EN | \ - PWR_CTRL2_DIV1_UP_EN | \ - PWR_CTRL2_DUR_STANDBY2_VAL | \ - PWR_CTRL2_DUR_STANDBY1_VAL | \ - PWR_CTRL2_CORE2_UP_RATIO | \ - PWR_CTRL2_CORE1_UP_RATIO; - __raw_writel(tmp, EXYNOS5_PWR_CTRL2); -} - static int __init exynos_cpuidle_probe(struct platform_device *pdev) { int cpu_id, ret; struct cpuidle_device *device; - if (soc_is_exynos5250()) - exynos5_core_down_clk(); - if (soc_is_exynos5440()) exynos4_idle_driver.state_count = 1; diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h index d36ad76..b59b0ad 100644 --- a/arch/arm/mach-exynos/include/mach/regs-clock.h +++ b/arch/arm/mach-exynos/include/mach/regs-clock.h @@ -347,22 +347,6 @@ #define EXYNOS5_EPLLCON0_LOCKED_SHIFT (29) -#define PWR_CTRL1_CORE2_DOWN_RATIO (7 << 28) -#define PWR_CTRL1_CORE1_DOWN_RATIO (7 << 16) -#define PWR_CTRL1_DIV2_DOWN_EN (1 << 9) -#define PWR_CTRL1_DIV1_DOWN_EN (1 << 8) -#define PWR_CTRL1_USE_CORE1_WFE (1 << 5) -#define PWR_CTRL1_USE_CORE0_WFE (1 << 4) -#define PWR_CTRL1_USE_CORE1_WFI (1 << 1) -#define PWR_CTRL1_USE_CORE0_WFI (1 << 0) - -#define PWR_CTRL2_DIV2_UP_EN (1 << 25) -#define PWR_CTRL2_DIV1_UP_EN (1 << 24) -#define PWR_CTRL2_DUR_STANDBY2_VAL (1 << 16) -#define PWR_CTRL2_DUR_STANDBY1_VAL (1 << 8) -#define PWR_CTRL2_CORE2_UP_RATIO (1 << 4) -#define PWR_CTRL2_CORE1_UP_RATIO (1 << 0) - /* Compatibility defines and inclusion */ #include <mach/regs-pmu.h> diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c index adf3234..07f2f46 100644 --- a/drivers/clk/samsung/clk-exynos5250.c +++ b/drivers/clk/samsung/clk-exynos5250.c @@ -22,6 +22,8 @@ #define APLL_CON0 0x100 #define SRC_CPU 0x200 #define DIV_CPU0 0x500 +#define PWR_CTRL1 0x1020 +#define PWR_CTRL2 0x1024 #define MPLL_LOCK 0x4000 #define MPLL_CON0 0x4100 #define SRC_CORE1 0x4204 @@ -77,6 +79,23 @@ #define GATE_IP_DISP1 0x10928 #define GATE_IP_ACP 0x10000 +/*Below definitions are used for PWR_CTRL settings*/ +#define PWR_CTRL1_CORE2_DOWN_RATIO (7 << 28) +#define PWR_CTRL1_CORE1_DOWN_RATIO (7 << 16) +#define PWR_CTRL1_DIV2_DOWN_EN (1 << 9) +#define PWR_CTRL1_DIV1_DOWN_EN (1 << 8) +#define PWR_CTRL1_USE_CORE1_WFE (1 << 5) +#define PWR_CTRL1_USE_CORE0_WFE (1 << 4) +#define PWR_CTRL1_USE_CORE1_WFI (1 << 1) +#define PWR_CTRL1_USE_CORE0_WFI (1 << 0) + +#define PWR_CTRL2_DIV2_UP_EN (1 << 25) +#define PWR_CTRL2_DIV1_UP_EN (1 << 24) +#define PWR_CTRL2_DUR_STANDBY2_VAL (1 << 16) +#define PWR_CTRL2_DUR_STANDBY1_VAL (1 << 8) +#define PWR_CTRL2_CORE2_UP_RATIO (1 << 4) +#define PWR_CTRL2_CORE1_UP_RATIO (1 << 0) + /* list of PLLs to be registered */ enum exynos5250_plls { apll, mpll, cpll, epll, vpll, gpll, bpll, @@ -135,6 +154,8 @@ enum exynos5250_clks { static unsigned long exynos5250_clk_regs[] __initdata = { SRC_CPU, DIV_CPU0, + PWR_CTRL1, + PWR_CTRL2, SRC_CORE1, SRC_TOP0, SRC_TOP2, @@ -543,6 +564,7 @@ static struct of_device_id ext_clk_match[] __initdata = { static void __init exynos5250_clk_init(struct device_node *np) { void __iomem *reg_base; + unsigned int tmp; if (np) { reg_base = of_iomap(np, 0); @@ -580,6 +602,26 @@ static void __init exynos5250_clk_init(struct device_node *np) samsung_clk_register_gate(exynos5250_gate_clks, ARRAY_SIZE(exynos5250_gate_clks)); + /* + * Enable arm clock down (in idle) and set arm divider + * ratios in WFI/WFE state. + */ + tmp = (PWR_CTRL1_CORE2_DOWN_RATIO | PWR_CTRL1_CORE1_DOWN_RATIO | + PWR_CTRL1_DIV2_DOWN_EN | PWR_CTRL1_DIV1_DOWN_EN | + PWR_CTRL1_USE_CORE1_WFE | PWR_CTRL1_USE_CORE0_WFE | + PWR_CTRL1_USE_CORE1_WFI | PWR_CTRL1_USE_CORE0_WFI); + __raw_writel(tmp, reg_base + PWR_CTRL1); + + /* + * Enable arm clock up (on exiting idle). Set arm divider + * ratios when not in idle along with the standby duration + * ratios. + */ + tmp = (PWR_CTRL2_DIV2_UP_EN | PWR_CTRL2_DIV1_UP_EN | + PWR_CTRL2_DUR_STANDBY2_VAL | PWR_CTRL2_DUR_STANDBY1_VAL | + PWR_CTRL2_CORE2_UP_RATIO | PWR_CTRL2_CORE1_UP_RATIO); + __raw_writel(tmp, reg_base + PWR_CTRL2); + pr_info("Exynos5250: clock setup completed, armclk=%ld\n", _get_rate("armclk")); }