diff mbox

[12/14] Documentation: mfd/regulator: s2mps11: Document the "op_mode" bindings

Message ID 1392123837-5517-13-git-send-email-k.kozlowski@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Krzysztof Kozlowski Feb. 11, 2014, 1:03 p.m. UTC 
Document the "op_mode" properties parsed from DTS by s2mps11 driver.

S2MPS11/S2MPS14 regulators support different modes of operation:
 - Always off;
 - On/Off controlled by pin/GPIO (PWREN/LDOEN/EMMCEN);
 - Always on;

This is very similar to S5M8767 regulator driver which also supports
opmodes (although S5M8767 have also low-power mode).

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
---
 Documentation/devicetree/bindings/mfd/s2mps11.txt |   46 +++++++++++++++++++++
 1 file changed, 46 insertions(+)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
index f69bec294f02..ffad6bfe2ebf 100644
--- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
+++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -54,6 +54,15 @@  BUCK[3, 4], and BUCK[7, 8, 10]
 The regulator constraints inside the regulator nodes use the standard regulator
 bindings which are documented elsewhere.
 
+On S2MPS14 chipset the driver additionally supports "op_mode" properties for
+each regulator.
+ - op_mode: describes the different operating modes of the regulators with
+	power mode change in SOC. The different possible values are,
+		0 - always off mode
+		1 - on in normal mode
+		3 - suspend mode
+		(NOTE: value of 2 is reserved)
+
 The following are the names of the regulators that the s2mps11 pmic block
 supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
 as per the datasheet of s2mps11.
@@ -112,3 +121,40 @@  Example:
 			};
 		};
 	};
+
+	s2mps14_pmic@66 {
+		compatible = "samsung,s2mps14-pmic";
+		reg = <0x66>;
+
+		s2m_osc: clocks {
+			compatible = "samsung,s2mps14-clk";
+			#clock-cells = 1;
+			clock-output-names = "xx", "", "zz";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VAP_ALIVE_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VAP_M1_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VAP_MIF_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <3>; /* Standby Mode */
+			};
+		};
+	};