| Message ID | 1393935776-22657-1-git-send-email-sachin.kamat@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 03/04/2014 05:52 PM, Sachin Kamat wrote: > High speed I2C is used on Exynos5 based SoCs. Enable it. > > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > --- > arch/arm/configs/exynos_defconfig | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig > index 4ce7b70ea901..e07a227ec0db 100644 > --- a/arch/arm/configs/exynos_defconfig > +++ b/arch/arm/configs/exynos_defconfig > @@ -65,6 +65,7 @@ CONFIG_TCG_TIS_I2C_INFINEON=y > CONFIG_I2C=y > CONFIG_I2C_MUX=y > CONFIG_I2C_ARB_GPIO_CHALLENGE=y > +CONFIG_I2C_EXYNOS5=y > CONFIG_I2C_S3C2410=y > CONFIG_DEBUG_GPIO=y > # CONFIG_HWMON is not set > Kukjin, Please consider picking this patch when you plan to update exynos_defconfig. With this change on upstream kernel, we are able to get Arndale_Octa board to boot and mount an MMC partition successfully.
Tushar Behera wrote: > > On 03/04/2014 05:52 PM, Sachin Kamat wrote: > > High speed I2C is used on Exynos5 based SoCs. Enable it. > > > > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > > --- > > arch/arm/configs/exynos_defconfig | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/arch/arm/configs/exynos_defconfig > b/arch/arm/configs/exynos_defconfig > > index 4ce7b70ea901..e07a227ec0db 100644 > > --- a/arch/arm/configs/exynos_defconfig > > +++ b/arch/arm/configs/exynos_defconfig > > @@ -65,6 +65,7 @@ CONFIG_TCG_TIS_I2C_INFINEON=y > > CONFIG_I2C=y > > CONFIG_I2C_MUX=y > > CONFIG_I2C_ARB_GPIO_CHALLENGE=y > > +CONFIG_I2C_EXYNOS5=y > > CONFIG_I2C_S3C2410=y > > CONFIG_DEBUG_GPIO=y > > # CONFIG_HWMON is not set > > > Kukjin, > > Please consider picking this patch when you plan to update > exynos_defconfig. With this change on upstream kernel, we are able to > get Arndale_Octa board to boot and mount an MMC partition successfully. > Oh, OK. BTW, basically the boot should be fine with/without selecting I2C_EXYNOS5...or if the config is required always for arndale_octa board, it should be enabled without any manual selecting. I think, it means this is just temporal solution not right approach to fix the problem.. I need to look at the codes... Thanks, Kukjin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 04/26/2014 04:44 PM, Kukjin Kim wrote: > Tushar Behera wrote: >> >> On 03/04/2014 05:52 PM, Sachin Kamat wrote: >>> High speed I2C is used on Exynos5 based SoCs. Enable it. >>> >>> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> >>> --- >>> arch/arm/configs/exynos_defconfig | 1 + >>> 1 file changed, 1 insertion(+) >>> >>> diff --git a/arch/arm/configs/exynos_defconfig >> b/arch/arm/configs/exynos_defconfig >>> index 4ce7b70ea901..e07a227ec0db 100644 >>> --- a/arch/arm/configs/exynos_defconfig >>> +++ b/arch/arm/configs/exynos_defconfig >>> @@ -65,6 +65,7 @@ CONFIG_TCG_TIS_I2C_INFINEON=y >>> CONFIG_I2C=y >>> CONFIG_I2C_MUX=y >>> CONFIG_I2C_ARB_GPIO_CHALLENGE=y >>> +CONFIG_I2C_EXYNOS5=y >>> CONFIG_I2C_S3C2410=y >>> CONFIG_DEBUG_GPIO=y >>> # CONFIG_HWMON is not set >>> >> Kukjin, >> >> Please consider picking this patch when you plan to update >> exynos_defconfig. With this change on upstream kernel, we are able to >> get Arndale_Octa board to boot and mount an MMC partition successfully. >> > Oh, OK. > > BTW, basically the boot should be fine with/without selecting The boot is just fine. Just that, we can't use the MMC partition to mount rootfs. > I2C_EXYNOS5...or if the config is required always for arndale_octa board, it > should be enabled without any manual selecting. I think, it means this is > just temporal solution not right approach to fix the problem.. > I don't see any reason why HS-I2C support not be enabled by default on exynos_defconfig. On many boards,the regulators are connected HS-I2C bus and without this option enabled the regulators don't come by default. If you have any reason why this is not the right approach to fix the problem, please let us know. > I need to look at the codes... > > Thanks, > Kukjin >
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 4ce7b70ea901..e07a227ec0db 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -65,6 +65,7 @@ CONFIG_TCG_TIS_I2C_INFINEON=y CONFIG_I2C=y CONFIG_I2C_MUX=y CONFIG_I2C_ARB_GPIO_CHALLENGE=y +CONFIG_I2C_EXYNOS5=y CONFIG_I2C_S3C2410=y CONFIG_DEBUG_GPIO=y # CONFIG_HWMON is not set
High speed I2C is used on Exynos5 based SoCs. Enable it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> --- arch/arm/configs/exynos_defconfig | 1 + 1 file changed, 1 insertion(+)