| Message ID | 1395900785-11334-3-git-send-email-vikas.sajjan@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Vikas, Basically same comments as for the series for Exynos5260. Also see more comments inline. On 27.03.2014 07:13, Vikas Sajjan wrote: > Adds Suspend-to-RAM support for EXYNOS5420 > > Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> > Signed-off-by: Vikas Sajjan <vikas.sajjan@samsung.com> > --- > arch/arm/mach-exynos/pm.c | 148 ++++++++++++++++++++++---- > arch/arm/mach-exynos/regs-pmu.h | 4 +- > arch/arm/plat-samsung/include/plat/map-s5p.h | 2 + > drivers/clk/samsung/clk-exynos5420.c | 32 ++++++ > 4 files changed, 167 insertions(+), 19 deletions(-) > > diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c > index 15af0ce..aa3c2c8 100644 > --- a/arch/arm/mach-exynos/pm.c > +++ b/arch/arm/mach-exynos/pm.c > @@ -59,6 +59,16 @@ static struct sleep_save exynos_core_save[] = { > SAVE_ITEM(S5P_SROM_BC3), > }; > > +static struct sleep_save exynos5420_cpustate_save[] = { > + SAVE_ITEM(EXYNOS5420_VA_CPU_STATE), > +}; > + > +static struct sleep_save exynos5420_reg_save[] = { > + SAVE_ITEM(EXYNOS5_SYS_DISP1_BLK_CFG), > + SAVE_ITEM(S5P_PMU_SPARE3), > +}; > + > + > /* > * GIC wake-up support > */ > @@ -81,7 +91,7 @@ static int exynos_irq_set_wake(struct irq_data *data, unsigned int state) > { > const struct exynos_wkup_irq *wkup_irq; > > - if (soc_is_exynos5250()) > + if (soc_is_exynos5250() || soc_is_exynos5420()) > wkup_irq = exynos5250_wkup_irq; > else > wkup_irq = exynos4_wkup_irq; > @@ -109,7 +119,15 @@ static int exynos_cpu_suspend(unsigned long arg) > outer_flush_all(); > #endif > > - if (soc_is_exynos5250()) > + /* > + * Clear IRAM register for cpu state so that primary CPU does > + * not enter low power start in U-Boot. > + * This is specific to exynos5420 SoC only. > + */ > + if (soc_is_exynos5420()) > + __raw_writel(0x0, EXYNOS5420_VA_CPU_STATE); > + > + if (soc_is_exynos5250() || soc_is_exynos5420()) > flush_cache_all(); > > /* issue the standby signal into the pm unit. */ > @@ -135,6 +153,20 @@ static void exynos_pm_prepare(void) > tmp = __raw_readl(EXYNOS5_JPEG_MEM_OPTION); > tmp &= ~EXYNOS5_OPTION_USE_RETENTION; > __raw_writel(tmp, EXYNOS5_JPEG_MEM_OPTION); > + } else if (soc_is_exynos5420()) { > + nit: Unnecessary blank line. > + s3c_pm_do_save(exynos5420_reg_save, > + ARRAY_SIZE(exynos5420_reg_save)); > + > + /* > + * The cpu state needs to be saved and restored so that the > + * secondary CPUs will enter low power start. Though the U-Boot > + * is setting the cpu state with low power flag, the kernel > + * needs to restore it back in case, the primary cpu fails to > + * suspend for any reason > + */ > + s3c_pm_do_save(exynos5420_cpustate_save, > + ARRAY_SIZE(exynos5420_cpustate_save)); > } > > /* Set value of power down register for sleep mode */ > @@ -145,11 +177,34 @@ static void exynos_pm_prepare(void) > /* ensure at least INFORM0 has the resume address */ > > __raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0); > + > + if (soc_is_exynos5420()) { > + > + tmp = __raw_readl(EXYNOS5_ARM_L2_OPTION); > + tmp &= ~EXYNOS5_USE_RETENTION; > + __raw_writel(tmp, EXYNOS5_ARM_L2_OPTION); > + > + tmp = __raw_readl(EXYNOS5420_SFR_AXI_CGDIS1); > + tmp |= EXYNOS5420_UFS; > + __raw_writel(tmp, EXYNOS5420_SFR_AXI_CGDIS1); > + > + tmp = __raw_readl(EXYNOS5420_ARM_COMMON_OPTION); > + tmp &= ~EXYNOS5420_L2RSTDISABLE_VALUE; > + __raw_writel(tmp, EXYNOS5420_ARM_COMMON_OPTION); > + tmp = __raw_readl(EXYNOS5420_FSYS2_OPTION); > + tmp |= EXYNOS5420_EMULATION; > + __raw_writel(tmp, EXYNOS5420_FSYS2_OPTION); > + tmp = __raw_readl(EXYNOS5420_PSGEN_OPTION); > + tmp |= EXYNOS5420_EMULATION; > + __raw_writel(tmp, EXYNOS5420_PSGEN_OPTION); > + } > + > } > > static int exynos_pm_suspend(void) > { > unsigned long tmp; > + unsigned long cluster_id; > > /* Setting Central Sequence Register for power down mode */ > > @@ -159,10 +214,20 @@ static int exynos_pm_suspend(void) > > /* Setting SEQ_OPTION register */ > > - tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0); > - __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); > + if (soc_is_exynos5420()) { > + cluster_id = (read_cpuid(CPUID_MPIDR) >> 8) & 0xf; > + if (!cluster_id) > + __raw_writel(EXYNOS5420_ARM_USE_STANDBY_WFI0, > + S5P_CENTRAL_SEQ_OPTION); > + else > + __raw_writel(EXYNOS5420_KFC_USE_STANDBY_WFI0, > + S5P_CENTRAL_SEQ_OPTION); > + } else { > + tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0); > + __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); > + } > > - if (!soc_is_exynos5250()) { > + if (!(soc_is_exynos5250() || soc_is_exynos5420())) { > /* Save Power control register */ > asm ("mrc p15, 0, %0, c15, c0, 0" > : "=r" (tmp) : : "cc"); > @@ -181,6 +246,15 @@ static void exynos_pm_resume(void) > { > unsigned long tmp; > > + if (soc_is_exynos5420()) { > + /* Restore the IRAM register cpu state */ > + s3c_pm_do_restore(exynos5420_cpustate_save, > + ARRAY_SIZE(exynos5420_cpustate_save)); > + > + __raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL, > + S5P_CENTRAL_SEQ_OPTION); > + } > + > /* > * If PMU failed while entering sleep mode, WFI will be > * ignored by PMU and then exiting cpu_do_idle(). > @@ -196,7 +270,8 @@ static void exynos_pm_resume(void) > /* No need to perform below restore code */ > goto early_wakeup; > } > - if (!soc_is_exynos5250()) { > + > + if (!(soc_is_exynos5250() || soc_is_exynos5420())) { > /* Restore Power control register */ > tmp = save_arm_register[0]; > asm volatile ("mcr p15, 0, %0, c15, c0, 0" > @@ -212,25 +287,57 @@ static void exynos_pm_resume(void) > > /* For release retention */ > > - __raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION); > - __raw_writel((1 << 28), S5P_PAD_RET_GPIO_OPTION); > - __raw_writel((1 << 28), S5P_PAD_RET_UART_OPTION); > - __raw_writel((1 << 28), S5P_PAD_RET_MMCA_OPTION); > - __raw_writel((1 << 28), S5P_PAD_RET_MMCB_OPTION); > - __raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION); > - __raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION); > + if (soc_is_exynos5250()) { > + __raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION); > + __raw_writel((1 << 28), S5P_PAD_RET_GPIO_OPTION); > + __raw_writel((1 << 28), S5P_PAD_RET_UART_OPTION); > + __raw_writel((1 << 28), S5P_PAD_RET_MMCA_OPTION); > + __raw_writel((1 << 28), S5P_PAD_RET_MMCB_OPTION); > + __raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION); > + __raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION); > + } else if (soc_is_exynos5420()) { > + __raw_writel(1 << 28, EXYNOS_PAD_RET_DRAM_OPTION); > + __raw_writel(1 << 28, EXYNOS_PAD_RET_MAUDIO_OPTION); > + __raw_writel(1 << 28, EXYNOS_PAD_RET_JTAG_OPTION); > + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_GPIO_OPTION); > + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_UART_OPTION); > + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_MMCA_OPTION); > + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_MMCB_OPTION); > + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_MMCC_OPTION); > + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_HSI_OPTION); > + __raw_writel(1 << 28, EXYNOS_PAD_RET_EBIA_OPTION); > + __raw_writel(1 << 28, EXYNOS_PAD_RET_EBIB_OPTION); > + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_SPI_OPTION); > + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_DRAM_COREBLK_OPTION); > + } > > if (soc_is_exynos5250()) > s3c_pm_do_restore(exynos5_sys_save, > ARRAY_SIZE(exynos5_sys_save)); > + else if (soc_is_exynos5420()) > + s3c_pm_do_restore(exynos5420_reg_save, > + ARRAY_SIZE(exynos5420_reg_save)); > > s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save)); > > - if (IS_ENABLED(CONFIG_SMP) && !soc_is_exynos5250()) > + if (IS_ENABLED(CONFIG_SMP) && > + !soc_is_exynos5250() && !soc_is_exynos5420()) > scu_enable(S5P_VA_SCU); > > early_wakeup: > > + if (soc_is_exynos5420()) { > + tmp = __raw_readl(EXYNOS5420_SFR_AXI_CGDIS1); > + tmp &= ~EXYNOS5420_UFS; > + __raw_writel(tmp, EXYNOS5420_SFR_AXI_CGDIS1); > + tmp = __raw_readl(EXYNOS5420_FSYS2_OPTION); > + tmp &= ~EXYNOS5420_EMULATION; > + __raw_writel(tmp, EXYNOS5420_FSYS2_OPTION); > + tmp = __raw_readl(EXYNOS5420_PSGEN_OPTION); > + tmp &= ~EXYNOS5420_EMULATION; > + __raw_writel(tmp, EXYNOS5420_PSGEN_OPTION); > + } > + > /* Clear SLEEP mode set in INFORM1 */ > __raw_writel(0x0, S5P_INFORM1); > > @@ -312,10 +419,15 @@ void __init exynos_pm_init(void) > gic_arch_extn.irq_set_wake = exynos_irq_set_wake; > > /* All wakeup disable */ > - tmp = __raw_readl(S5P_WAKEUP_MASK); > - tmp |= ((0xFF << 8) | (0x1F << 1)); > - __raw_writel(tmp, S5P_WAKEUP_MASK); > - > + if (soc_is_exynos5420()) { > + tmp = __raw_readl(S5P_WAKEUP_MASK); > + tmp |= ((0x7F << 7) | (0x1F << 1)); > + __raw_writel(tmp, S5P_WAKEUP_MASK); > + } else { > + tmp = __raw_readl(S5P_WAKEUP_MASK); > + tmp |= ((0xFF << 8) | (0x1F << 1)); > + __raw_writel(tmp, S5P_WAKEUP_MASK); > + } > register_syscore_ops(&exynos_pm_syscore_ops); > suspend_set_ops(&exynos_suspend_ops); > } > diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h > index cfbfc575..53eac2b 100644 > --- a/arch/arm/mach-exynos/regs-pmu.h > +++ b/arch/arm/mach-exynos/regs-pmu.h > @@ -39,6 +39,7 @@ > #define S5P_INFORM6 S5P_PMUREG(0x0818) > #define S5P_INFORM7 S5P_PMUREG(0x081C) > > +#define S5P_PMU_SPARE3 S5P_PMUREG(0x090C) > #define EXYNOS_IROM_DATA2 S5P_PMUREG(0x0988) > > #define S5P_ARM_CORE0_LOWPWR S5P_PMUREG(0x1000) > @@ -113,7 +114,6 @@ > #define EXYNOS5_ARM_L2_OPTION S5P_PMUREG(0x2608) > #define EXYNOS5_USE_RETENTION BIT(4) > > - > #define S5P_PAD_RET_MAUDIO_OPTION S5P_PMUREG(0x3028) > #define S5P_PAD_RET_GPIO_OPTION S5P_PMUREG(0x3108) > #define S5P_PAD_RET_UART_OPTION S5P_PMUREG(0x3128) > @@ -216,6 +216,8 @@ > > /* For EXYNOS5 */ > > +#define EXYNOS5_SYS_DISP1_BLK_CFG S5P_SYSREG(0x0214) > + > #define EXYNOS5_SYS_I2C_CFG S5P_SYSREG(0x0234) > > #define EXYNOS5_AUTO_WDTRESET_DISABLE S5P_PMUREG(0x0408) > diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h > index c186786..cfb150e 100644 > --- a/arch/arm/plat-samsung/include/plat/map-s5p.h > +++ b/arch/arm/plat-samsung/include/plat/map-s5p.h > @@ -57,6 +57,8 @@ > #define S3C_UART_OFFSET (0x400) > #endif > > +#define EXYNOS5420_VA_CPU_STATE (S5P_VA_SYSRAM + 0x28) > + Please, no more static addresses. This should be defined as an offset to SYSRAM in the source file that actually uses it. > #include <plat/map-s3c.h> > > #endif /* __ASM_PLAT_MAP_S5P_H */ > diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c > index 60b2681..965ea69 100644 > --- a/drivers/clk/samsung/clk-exynos5420.c > +++ b/drivers/clk/samsung/clk-exynos5420.c > @@ -101,6 +101,19 @@ > #define KPLL_CON0 0x28100 > #define SRC_KFC 0x28200 > #define DIV_KFC0 0x28500 > +#define SRC_MASK_CPERI 0x04300 Please keep the registers sorted... > +#define SRC_MASK_TOP0 0x10300 > +#define SRC_MASK_TOP1 0x10304 > +#define SRC_MASK_TOP2 0x10308 > +#define SRC_MASK_TOP7 0x1031C > +#define SRC_MASK_MAU 0x10334 > +#define SRC_MASK_FSYS 0x10340 > +#define SRC_MASK_PERIC0 0x10350 > +#define SRC_MASK_PERIC1 0x10354 > +#define SRC_MASK_ISP 0x10370 > +#define GATE_BUS_DISP1 0x10728 > +#define GATE_IP_PERIC 0x10950 > + > > /* list of PLLs */ > enum exynos5420_plls { > @@ -180,11 +193,30 @@ static unsigned long exynos5420_clk_regs[] __initdata = { > DIV_KFC0, > }; > > +static const struct samsung_clk_reg_dump exynos5420_set_clksrc[] = { > + { .offset = SRC_MASK_CPERI, .value = 0xffffffff, }, > + { .offset = SRC_MASK_TOP0, .value = 0x11111111, }, > + { .offset = SRC_MASK_TOP1, .value = 0x11101111, }, > + { .offset = SRC_MASK_TOP2, .value = 0x11111110, }, > + { .offset = SRC_MASK_TOP7, .value = 0x00111100, }, > + { .offset = SRC_MASK_DISP10, .value = 0x11111110, }, > + { .offset = SRC_MASK_MAU, .value = 0x10000000, }, > + { .offset = SRC_MASK_FSYS, .value = 0x11111110, }, > + { .offset = SRC_MASK_PERIC0, .value = 0x11111110, }, > + { .offset = SRC_MASK_PERIC1, .value = 0x11111100, }, > + { .offset = SRC_MASK_ISP, .value = 0x11111000, }, > + { .offset = GATE_BUS_DISP1, .value = 0xffffffff, }, > + { .offset = GATE_IP_PERIC, .value = 0xffffffff, }, > +}; > + > + > static int exynos5420_clk_suspend(void) > { > samsung_clk_save(reg_base, exynos5420_save, > ARRAY_SIZE(exynos5420_clk_regs)); > > + samsung_clk_restore(reg_base, exynos5420_set_clksrc, > + ARRAY_SIZE(exynos5420_set_clksrc)); nit: You could align ARRAY_SIZE to the same indentation level as the call to samsung_clk_save() above. Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
One more thing. The change to the clock driver should be separated from arch changes. Best regards, Tomasz On 15.04.2014 21:03, Tomasz Figa wrote: > Hi Vikas, > > Basically same comments as for the series for Exynos5260. Also see more > comments inline. > > On 27.03.2014 07:13, Vikas Sajjan wrote: >> Adds Suspend-to-RAM support for EXYNOS5420 >> >> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> >> Signed-off-by: Vikas Sajjan <vikas.sajjan@samsung.com> >> --- >> arch/arm/mach-exynos/pm.c | 148 >> ++++++++++++++++++++++---- >> arch/arm/mach-exynos/regs-pmu.h | 4 +- >> arch/arm/plat-samsung/include/plat/map-s5p.h | 2 + >> drivers/clk/samsung/clk-exynos5420.c | 32 ++++++ >> 4 files changed, 167 insertions(+), 19 deletions(-) >> >> diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c >> index 15af0ce..aa3c2c8 100644 >> --- a/arch/arm/mach-exynos/pm.c >> +++ b/arch/arm/mach-exynos/pm.c >> @@ -59,6 +59,16 @@ static struct sleep_save exynos_core_save[] = { >> SAVE_ITEM(S5P_SROM_BC3), >> }; >> >> +static struct sleep_save exynos5420_cpustate_save[] = { >> + SAVE_ITEM(EXYNOS5420_VA_CPU_STATE), >> +}; >> + >> +static struct sleep_save exynos5420_reg_save[] = { >> + SAVE_ITEM(EXYNOS5_SYS_DISP1_BLK_CFG), >> + SAVE_ITEM(S5P_PMU_SPARE3), >> +}; >> + >> + >> /* >> * GIC wake-up support >> */ >> @@ -81,7 +91,7 @@ static int exynos_irq_set_wake(struct irq_data >> *data, unsigned int state) >> { >> const struct exynos_wkup_irq *wkup_irq; >> >> - if (soc_is_exynos5250()) >> + if (soc_is_exynos5250() || soc_is_exynos5420()) >> wkup_irq = exynos5250_wkup_irq; >> else >> wkup_irq = exynos4_wkup_irq; >> @@ -109,7 +119,15 @@ static int exynos_cpu_suspend(unsigned long arg) >> outer_flush_all(); >> #endif >> >> - if (soc_is_exynos5250()) >> + /* >> + * Clear IRAM register for cpu state so that primary CPU does >> + * not enter low power start in U-Boot. >> + * This is specific to exynos5420 SoC only. >> + */ >> + if (soc_is_exynos5420()) >> + __raw_writel(0x0, EXYNOS5420_VA_CPU_STATE); >> + >> + if (soc_is_exynos5250() || soc_is_exynos5420()) >> flush_cache_all(); >> >> /* issue the standby signal into the pm unit. */ >> @@ -135,6 +153,20 @@ static void exynos_pm_prepare(void) >> tmp = __raw_readl(EXYNOS5_JPEG_MEM_OPTION); >> tmp &= ~EXYNOS5_OPTION_USE_RETENTION; >> __raw_writel(tmp, EXYNOS5_JPEG_MEM_OPTION); >> + } else if (soc_is_exynos5420()) { >> + > > nit: Unnecessary blank line. > >> + s3c_pm_do_save(exynos5420_reg_save, >> + ARRAY_SIZE(exynos5420_reg_save)); >> + >> + /* >> + * The cpu state needs to be saved and restored so that the >> + * secondary CPUs will enter low power start. Though the U-Boot >> + * is setting the cpu state with low power flag, the kernel >> + * needs to restore it back in case, the primary cpu fails to >> + * suspend for any reason >> + */ >> + s3c_pm_do_save(exynos5420_cpustate_save, >> + ARRAY_SIZE(exynos5420_cpustate_save)); >> } >> >> /* Set value of power down register for sleep mode */ >> @@ -145,11 +177,34 @@ static void exynos_pm_prepare(void) >> /* ensure at least INFORM0 has the resume address */ >> >> __raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0); >> + >> + if (soc_is_exynos5420()) { >> + >> + tmp = __raw_readl(EXYNOS5_ARM_L2_OPTION); >> + tmp &= ~EXYNOS5_USE_RETENTION; >> + __raw_writel(tmp, EXYNOS5_ARM_L2_OPTION); >> + >> + tmp = __raw_readl(EXYNOS5420_SFR_AXI_CGDIS1); >> + tmp |= EXYNOS5420_UFS; >> + __raw_writel(tmp, EXYNOS5420_SFR_AXI_CGDIS1); >> + >> + tmp = __raw_readl(EXYNOS5420_ARM_COMMON_OPTION); >> + tmp &= ~EXYNOS5420_L2RSTDISABLE_VALUE; >> + __raw_writel(tmp, EXYNOS5420_ARM_COMMON_OPTION); >> + tmp = __raw_readl(EXYNOS5420_FSYS2_OPTION); >> + tmp |= EXYNOS5420_EMULATION; >> + __raw_writel(tmp, EXYNOS5420_FSYS2_OPTION); >> + tmp = __raw_readl(EXYNOS5420_PSGEN_OPTION); >> + tmp |= EXYNOS5420_EMULATION; >> + __raw_writel(tmp, EXYNOS5420_PSGEN_OPTION); >> + } >> + >> } >> >> static int exynos_pm_suspend(void) >> { >> unsigned long tmp; >> + unsigned long cluster_id; >> >> /* Setting Central Sequence Register for power down mode */ >> >> @@ -159,10 +214,20 @@ static int exynos_pm_suspend(void) >> >> /* Setting SEQ_OPTION register */ >> >> - tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0); >> - __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); >> + if (soc_is_exynos5420()) { >> + cluster_id = (read_cpuid(CPUID_MPIDR) >> 8) & 0xf; >> + if (!cluster_id) >> + __raw_writel(EXYNOS5420_ARM_USE_STANDBY_WFI0, >> + S5P_CENTRAL_SEQ_OPTION); >> + else >> + __raw_writel(EXYNOS5420_KFC_USE_STANDBY_WFI0, >> + S5P_CENTRAL_SEQ_OPTION); >> + } else { >> + tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0); >> + __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); >> + } >> >> - if (!soc_is_exynos5250()) { >> + if (!(soc_is_exynos5250() || soc_is_exynos5420())) { >> /* Save Power control register */ >> asm ("mrc p15, 0, %0, c15, c0, 0" >> : "=r" (tmp) : : "cc"); >> @@ -181,6 +246,15 @@ static void exynos_pm_resume(void) >> { >> unsigned long tmp; >> >> + if (soc_is_exynos5420()) { >> + /* Restore the IRAM register cpu state */ >> + s3c_pm_do_restore(exynos5420_cpustate_save, >> + ARRAY_SIZE(exynos5420_cpustate_save)); >> + >> + __raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL, >> + S5P_CENTRAL_SEQ_OPTION); >> + } >> + >> /* >> * If PMU failed while entering sleep mode, WFI will be >> * ignored by PMU and then exiting cpu_do_idle(). >> @@ -196,7 +270,8 @@ static void exynos_pm_resume(void) >> /* No need to perform below restore code */ >> goto early_wakeup; >> } >> - if (!soc_is_exynos5250()) { >> + >> + if (!(soc_is_exynos5250() || soc_is_exynos5420())) { >> /* Restore Power control register */ >> tmp = save_arm_register[0]; >> asm volatile ("mcr p15, 0, %0, c15, c0, 0" >> @@ -212,25 +287,57 @@ static void exynos_pm_resume(void) >> >> /* For release retention */ >> >> - __raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION); >> - __raw_writel((1 << 28), S5P_PAD_RET_GPIO_OPTION); >> - __raw_writel((1 << 28), S5P_PAD_RET_UART_OPTION); >> - __raw_writel((1 << 28), S5P_PAD_RET_MMCA_OPTION); >> - __raw_writel((1 << 28), S5P_PAD_RET_MMCB_OPTION); >> - __raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION); >> - __raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION); >> + if (soc_is_exynos5250()) { >> + __raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION); >> + __raw_writel((1 << 28), S5P_PAD_RET_GPIO_OPTION); >> + __raw_writel((1 << 28), S5P_PAD_RET_UART_OPTION); >> + __raw_writel((1 << 28), S5P_PAD_RET_MMCA_OPTION); >> + __raw_writel((1 << 28), S5P_PAD_RET_MMCB_OPTION); >> + __raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION); >> + __raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION); >> + } else if (soc_is_exynos5420()) { >> + __raw_writel(1 << 28, EXYNOS_PAD_RET_DRAM_OPTION); >> + __raw_writel(1 << 28, EXYNOS_PAD_RET_MAUDIO_OPTION); >> + __raw_writel(1 << 28, EXYNOS_PAD_RET_JTAG_OPTION); >> + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_GPIO_OPTION); >> + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_UART_OPTION); >> + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_MMCA_OPTION); >> + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_MMCB_OPTION); >> + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_MMCC_OPTION); >> + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_HSI_OPTION); >> + __raw_writel(1 << 28, EXYNOS_PAD_RET_EBIA_OPTION); >> + __raw_writel(1 << 28, EXYNOS_PAD_RET_EBIB_OPTION); >> + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_SPI_OPTION); >> + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_DRAM_COREBLK_OPTION); >> + } >> >> if (soc_is_exynos5250()) >> s3c_pm_do_restore(exynos5_sys_save, >> ARRAY_SIZE(exynos5_sys_save)); >> + else if (soc_is_exynos5420()) >> + s3c_pm_do_restore(exynos5420_reg_save, >> + ARRAY_SIZE(exynos5420_reg_save)); >> >> s3c_pm_do_restore_core(exynos_core_save, >> ARRAY_SIZE(exynos_core_save)); >> >> - if (IS_ENABLED(CONFIG_SMP) && !soc_is_exynos5250()) >> + if (IS_ENABLED(CONFIG_SMP) && >> + !soc_is_exynos5250() && !soc_is_exynos5420()) >> scu_enable(S5P_VA_SCU); >> >> early_wakeup: >> >> + if (soc_is_exynos5420()) { >> + tmp = __raw_readl(EXYNOS5420_SFR_AXI_CGDIS1); >> + tmp &= ~EXYNOS5420_UFS; >> + __raw_writel(tmp, EXYNOS5420_SFR_AXI_CGDIS1); >> + tmp = __raw_readl(EXYNOS5420_FSYS2_OPTION); >> + tmp &= ~EXYNOS5420_EMULATION; >> + __raw_writel(tmp, EXYNOS5420_FSYS2_OPTION); >> + tmp = __raw_readl(EXYNOS5420_PSGEN_OPTION); >> + tmp &= ~EXYNOS5420_EMULATION; >> + __raw_writel(tmp, EXYNOS5420_PSGEN_OPTION); >> + } >> + >> /* Clear SLEEP mode set in INFORM1 */ >> __raw_writel(0x0, S5P_INFORM1); >> >> @@ -312,10 +419,15 @@ void __init exynos_pm_init(void) >> gic_arch_extn.irq_set_wake = exynos_irq_set_wake; >> >> /* All wakeup disable */ >> - tmp = __raw_readl(S5P_WAKEUP_MASK); >> - tmp |= ((0xFF << 8) | (0x1F << 1)); >> - __raw_writel(tmp, S5P_WAKEUP_MASK); >> - >> + if (soc_is_exynos5420()) { >> + tmp = __raw_readl(S5P_WAKEUP_MASK); >> + tmp |= ((0x7F << 7) | (0x1F << 1)); >> + __raw_writel(tmp, S5P_WAKEUP_MASK); >> + } else { >> + tmp = __raw_readl(S5P_WAKEUP_MASK); >> + tmp |= ((0xFF << 8) | (0x1F << 1)); >> + __raw_writel(tmp, S5P_WAKEUP_MASK); >> + } >> register_syscore_ops(&exynos_pm_syscore_ops); >> suspend_set_ops(&exynos_suspend_ops); >> } >> diff --git a/arch/arm/mach-exynos/regs-pmu.h >> b/arch/arm/mach-exynos/regs-pmu.h >> index cfbfc575..53eac2b 100644 >> --- a/arch/arm/mach-exynos/regs-pmu.h >> +++ b/arch/arm/mach-exynos/regs-pmu.h >> @@ -39,6 +39,7 @@ >> #define S5P_INFORM6 S5P_PMUREG(0x0818) >> #define S5P_INFORM7 S5P_PMUREG(0x081C) >> >> +#define S5P_PMU_SPARE3 S5P_PMUREG(0x090C) >> #define EXYNOS_IROM_DATA2 S5P_PMUREG(0x0988) >> >> #define S5P_ARM_CORE0_LOWPWR S5P_PMUREG(0x1000) >> @@ -113,7 +114,6 @@ >> #define EXYNOS5_ARM_L2_OPTION S5P_PMUREG(0x2608) >> #define EXYNOS5_USE_RETENTION BIT(4) >> >> - >> #define S5P_PAD_RET_MAUDIO_OPTION S5P_PMUREG(0x3028) >> #define S5P_PAD_RET_GPIO_OPTION S5P_PMUREG(0x3108) >> #define S5P_PAD_RET_UART_OPTION S5P_PMUREG(0x3128) >> @@ -216,6 +216,8 @@ >> >> /* For EXYNOS5 */ >> >> +#define EXYNOS5_SYS_DISP1_BLK_CFG S5P_SYSREG(0x0214) >> + >> #define EXYNOS5_SYS_I2C_CFG S5P_SYSREG(0x0234) >> >> #define EXYNOS5_AUTO_WDTRESET_DISABLE S5P_PMUREG(0x0408) >> diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h >> b/arch/arm/plat-samsung/include/plat/map-s5p.h >> index c186786..cfb150e 100644 >> --- a/arch/arm/plat-samsung/include/plat/map-s5p.h >> +++ b/arch/arm/plat-samsung/include/plat/map-s5p.h >> @@ -57,6 +57,8 @@ >> #define S3C_UART_OFFSET (0x400) >> #endif >> >> +#define EXYNOS5420_VA_CPU_STATE (S5P_VA_SYSRAM + 0x28) >> + > > Please, no more static addresses. This should be defined as an offset to > SYSRAM in the source file that actually uses it. > >> #include <plat/map-s3c.h> >> >> #endif /* __ASM_PLAT_MAP_S5P_H */ >> diff --git a/drivers/clk/samsung/clk-exynos5420.c >> b/drivers/clk/samsung/clk-exynos5420.c >> index 60b2681..965ea69 100644 >> --- a/drivers/clk/samsung/clk-exynos5420.c >> +++ b/drivers/clk/samsung/clk-exynos5420.c >> @@ -101,6 +101,19 @@ >> #define KPLL_CON0 0x28100 >> #define SRC_KFC 0x28200 >> #define DIV_KFC0 0x28500 >> +#define SRC_MASK_CPERI 0x04300 > > Please keep the registers sorted... > >> +#define SRC_MASK_TOP0 0x10300 >> +#define SRC_MASK_TOP1 0x10304 >> +#define SRC_MASK_TOP2 0x10308 >> +#define SRC_MASK_TOP7 0x1031C >> +#define SRC_MASK_MAU 0x10334 >> +#define SRC_MASK_FSYS 0x10340 >> +#define SRC_MASK_PERIC0 0x10350 >> +#define SRC_MASK_PERIC1 0x10354 >> +#define SRC_MASK_ISP 0x10370 >> +#define GATE_BUS_DISP1 0x10728 >> +#define GATE_IP_PERIC 0x10950 >> + >> >> /* list of PLLs */ >> enum exynos5420_plls { >> @@ -180,11 +193,30 @@ static unsigned long exynos5420_clk_regs[] >> __initdata = { >> DIV_KFC0, >> }; >> >> +static const struct samsung_clk_reg_dump exynos5420_set_clksrc[] = { >> + { .offset = SRC_MASK_CPERI, .value = 0xffffffff, }, >> + { .offset = SRC_MASK_TOP0, .value = 0x11111111, }, >> + { .offset = SRC_MASK_TOP1, .value = 0x11101111, }, >> + { .offset = SRC_MASK_TOP2, .value = 0x11111110, }, >> + { .offset = SRC_MASK_TOP7, .value = 0x00111100, }, >> + { .offset = SRC_MASK_DISP10, .value = 0x11111110, }, >> + { .offset = SRC_MASK_MAU, .value = 0x10000000, }, >> + { .offset = SRC_MASK_FSYS, .value = 0x11111110, }, >> + { .offset = SRC_MASK_PERIC0, .value = 0x11111110, }, >> + { .offset = SRC_MASK_PERIC1, .value = 0x11111100, }, >> + { .offset = SRC_MASK_ISP, .value = 0x11111000, }, >> + { .offset = GATE_BUS_DISP1, .value = 0xffffffff, }, >> + { .offset = GATE_IP_PERIC, .value = 0xffffffff, }, >> +}; >> + >> + >> static int exynos5420_clk_suspend(void) >> { >> samsung_clk_save(reg_base, exynos5420_save, >> ARRAY_SIZE(exynos5420_clk_regs)); >> >> + samsung_clk_restore(reg_base, exynos5420_set_clksrc, >> + ARRAY_SIZE(exynos5420_set_clksrc)); > > nit: You could align ARRAY_SIZE to the same indentation level as the > call to samsung_clk_save() above. > > Best regards, > Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Tomasz, On Wed, Apr 16, 2014 at 12:33 AM, Tomasz Figa <tomasz.figa@gmail.com> wrote: > Hi Vikas, > > Basically same comments as for the series for Exynos5260. Also see more > comments inline. > > > On 27.03.2014 07:13, Vikas Sajjan wrote: >> >> Adds Suspend-to-RAM support for EXYNOS5420 >> >> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> >> Signed-off-by: Vikas Sajjan <vikas.sajjan@samsung.com> >> --- >> arch/arm/mach-exynos/pm.c | 148 >> ++++++++++++++++++++++---- >> arch/arm/mach-exynos/regs-pmu.h | 4 +- >> arch/arm/plat-samsung/include/plat/map-s5p.h | 2 + >> drivers/clk/samsung/clk-exynos5420.c | 32 ++++++ >> 4 files changed, 167 insertions(+), 19 deletions(-) >> >> diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c >> index 15af0ce..aa3c2c8 100644 >> --- a/arch/arm/mach-exynos/pm.c >> +++ b/arch/arm/mach-exynos/pm.c >> @@ -59,6 +59,16 @@ static struct sleep_save exynos_core_save[] = { >> SAVE_ITEM(S5P_SROM_BC3), >> }; >> >> +static struct sleep_save exynos5420_cpustate_save[] = { >> + SAVE_ITEM(EXYNOS5420_VA_CPU_STATE), >> +}; >> + >> +static struct sleep_save exynos5420_reg_save[] = { >> + SAVE_ITEM(EXYNOS5_SYS_DISP1_BLK_CFG), >> + SAVE_ITEM(S5P_PMU_SPARE3), >> +}; >> + >> + >> /* >> * GIC wake-up support >> */ >> @@ -81,7 +91,7 @@ static int exynos_irq_set_wake(struct irq_data *data, >> unsigned int state) >> { >> const struct exynos_wkup_irq *wkup_irq; >> >> - if (soc_is_exynos5250()) >> + if (soc_is_exynos5250() || soc_is_exynos5420()) >> wkup_irq = exynos5250_wkup_irq; >> else >> wkup_irq = exynos4_wkup_irq; >> @@ -109,7 +119,15 @@ static int exynos_cpu_suspend(unsigned long arg) >> outer_flush_all(); >> #endif >> >> - if (soc_is_exynos5250()) >> + /* >> + * Clear IRAM register for cpu state so that primary CPU does >> + * not enter low power start in U-Boot. >> + * This is specific to exynos5420 SoC only. >> + */ >> + if (soc_is_exynos5420()) >> + __raw_writel(0x0, EXYNOS5420_VA_CPU_STATE); >> + >> + if (soc_is_exynos5250() || soc_is_exynos5420()) >> flush_cache_all(); >> >> /* issue the standby signal into the pm unit. */ >> @@ -135,6 +153,20 @@ static void exynos_pm_prepare(void) >> tmp = __raw_readl(EXYNOS5_JPEG_MEM_OPTION); >> tmp &= ~EXYNOS5_OPTION_USE_RETENTION; >> __raw_writel(tmp, EXYNOS5_JPEG_MEM_OPTION); >> + } else if (soc_is_exynos5420()) { >> + > > > nit: Unnecessary blank line. OK. > > >> + s3c_pm_do_save(exynos5420_reg_save, >> + ARRAY_SIZE(exynos5420_reg_save)); >> + >> + /* >> + * The cpu state needs to be saved and restored so that >> the >> + * secondary CPUs will enter low power start. Though the >> U-Boot >> + * is setting the cpu state with low power flag, the >> kernel >> + * needs to restore it back in case, the primary cpu fails >> to >> + * suspend for any reason >> + */ >> + s3c_pm_do_save(exynos5420_cpustate_save, >> + ARRAY_SIZE(exynos5420_cpustate_save)); >> } >> >> /* Set value of power down register for sleep mode */ >> @@ -145,11 +177,34 @@ static void exynos_pm_prepare(void) >> /* ensure at least INFORM0 has the resume address */ >> >> __raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0); >> + >> + if (soc_is_exynos5420()) { >> + >> + tmp = __raw_readl(EXYNOS5_ARM_L2_OPTION); >> + tmp &= ~EXYNOS5_USE_RETENTION; >> + __raw_writel(tmp, EXYNOS5_ARM_L2_OPTION); >> + >> + tmp = __raw_readl(EXYNOS5420_SFR_AXI_CGDIS1); >> + tmp |= EXYNOS5420_UFS; >> + __raw_writel(tmp, EXYNOS5420_SFR_AXI_CGDIS1); >> + >> + tmp = __raw_readl(EXYNOS5420_ARM_COMMON_OPTION); >> + tmp &= ~EXYNOS5420_L2RSTDISABLE_VALUE; >> + __raw_writel(tmp, EXYNOS5420_ARM_COMMON_OPTION); >> + tmp = __raw_readl(EXYNOS5420_FSYS2_OPTION); >> + tmp |= EXYNOS5420_EMULATION; >> + __raw_writel(tmp, EXYNOS5420_FSYS2_OPTION); >> + tmp = __raw_readl(EXYNOS5420_PSGEN_OPTION); >> + tmp |= EXYNOS5420_EMULATION; >> + __raw_writel(tmp, EXYNOS5420_PSGEN_OPTION); >> + } >> + >> } >> >> static int exynos_pm_suspend(void) >> { >> unsigned long tmp; >> + unsigned long cluster_id; >> >> /* Setting Central Sequence Register for power down mode */ >> >> @@ -159,10 +214,20 @@ static int exynos_pm_suspend(void) >> >> /* Setting SEQ_OPTION register */ >> >> - tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0); >> - __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); >> + if (soc_is_exynos5420()) { >> + cluster_id = (read_cpuid(CPUID_MPIDR) >> 8) & 0xf; >> + if (!cluster_id) >> + __raw_writel(EXYNOS5420_ARM_USE_STANDBY_WFI0, >> + S5P_CENTRAL_SEQ_OPTION); >> + else >> + __raw_writel(EXYNOS5420_KFC_USE_STANDBY_WFI0, >> + S5P_CENTRAL_SEQ_OPTION); >> + } else { >> + tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0); >> + __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); >> + } >> >> - if (!soc_is_exynos5250()) { >> + if (!(soc_is_exynos5250() || soc_is_exynos5420())) { >> /* Save Power control register */ >> asm ("mrc p15, 0, %0, c15, c0, 0" >> : "=r" (tmp) : : "cc"); >> @@ -181,6 +246,15 @@ static void exynos_pm_resume(void) >> { >> unsigned long tmp; >> >> + if (soc_is_exynos5420()) { >> + /* Restore the IRAM register cpu state */ >> + s3c_pm_do_restore(exynos5420_cpustate_save, >> + ARRAY_SIZE(exynos5420_cpustate_save)); >> + >> + __raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL, >> + S5P_CENTRAL_SEQ_OPTION); >> + } >> + >> /* >> * If PMU failed while entering sleep mode, WFI will be >> * ignored by PMU and then exiting cpu_do_idle(). >> @@ -196,7 +270,8 @@ static void exynos_pm_resume(void) >> /* No need to perform below restore code */ >> goto early_wakeup; >> } >> - if (!soc_is_exynos5250()) { >> + >> + if (!(soc_is_exynos5250() || soc_is_exynos5420())) { >> /* Restore Power control register */ >> tmp = save_arm_register[0]; >> asm volatile ("mcr p15, 0, %0, c15, c0, 0" >> @@ -212,25 +287,57 @@ static void exynos_pm_resume(void) >> >> /* For release retention */ >> >> - __raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION); >> - __raw_writel((1 << 28), S5P_PAD_RET_GPIO_OPTION); >> - __raw_writel((1 << 28), S5P_PAD_RET_UART_OPTION); >> - __raw_writel((1 << 28), S5P_PAD_RET_MMCA_OPTION); >> - __raw_writel((1 << 28), S5P_PAD_RET_MMCB_OPTION); >> - __raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION); >> - __raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION); >> + if (soc_is_exynos5250()) { >> + __raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION); >> + __raw_writel((1 << 28), S5P_PAD_RET_GPIO_OPTION); >> + __raw_writel((1 << 28), S5P_PAD_RET_UART_OPTION); >> + __raw_writel((1 << 28), S5P_PAD_RET_MMCA_OPTION); >> + __raw_writel((1 << 28), S5P_PAD_RET_MMCB_OPTION); >> + __raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION); >> + __raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION); >> + } else if (soc_is_exynos5420()) { >> + __raw_writel(1 << 28, EXYNOS_PAD_RET_DRAM_OPTION); >> + __raw_writel(1 << 28, EXYNOS_PAD_RET_MAUDIO_OPTION); >> + __raw_writel(1 << 28, EXYNOS_PAD_RET_JTAG_OPTION); >> + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_GPIO_OPTION); >> + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_UART_OPTION); >> + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_MMCA_OPTION); >> + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_MMCB_OPTION); >> + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_MMCC_OPTION); >> + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_HSI_OPTION); >> + __raw_writel(1 << 28, EXYNOS_PAD_RET_EBIA_OPTION); >> + __raw_writel(1 << 28, EXYNOS_PAD_RET_EBIB_OPTION); >> + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_SPI_OPTION); >> + __raw_writel(1 << 28, >> EXYNOS5420_PAD_RET_DRAM_COREBLK_OPTION); >> + } >> >> if (soc_is_exynos5250()) >> s3c_pm_do_restore(exynos5_sys_save, >> ARRAY_SIZE(exynos5_sys_save)); >> + else if (soc_is_exynos5420()) >> + s3c_pm_do_restore(exynos5420_reg_save, >> + ARRAY_SIZE(exynos5420_reg_save)); >> >> s3c_pm_do_restore_core(exynos_core_save, >> ARRAY_SIZE(exynos_core_save)); >> >> - if (IS_ENABLED(CONFIG_SMP) && !soc_is_exynos5250()) >> + if (IS_ENABLED(CONFIG_SMP) && >> + !soc_is_exynos5250() && !soc_is_exynos5420()) >> scu_enable(S5P_VA_SCU); >> >> early_wakeup: >> >> + if (soc_is_exynos5420()) { >> + tmp = __raw_readl(EXYNOS5420_SFR_AXI_CGDIS1); >> + tmp &= ~EXYNOS5420_UFS; >> + __raw_writel(tmp, EXYNOS5420_SFR_AXI_CGDIS1); >> + tmp = __raw_readl(EXYNOS5420_FSYS2_OPTION); >> + tmp &= ~EXYNOS5420_EMULATION; >> + __raw_writel(tmp, EXYNOS5420_FSYS2_OPTION); >> + tmp = __raw_readl(EXYNOS5420_PSGEN_OPTION); >> + tmp &= ~EXYNOS5420_EMULATION; >> + __raw_writel(tmp, EXYNOS5420_PSGEN_OPTION); >> + } >> + >> /* Clear SLEEP mode set in INFORM1 */ >> __raw_writel(0x0, S5P_INFORM1); >> >> @@ -312,10 +419,15 @@ void __init exynos_pm_init(void) >> gic_arch_extn.irq_set_wake = exynos_irq_set_wake; >> >> /* All wakeup disable */ >> - tmp = __raw_readl(S5P_WAKEUP_MASK); >> - tmp |= ((0xFF << 8) | (0x1F << 1)); >> - __raw_writel(tmp, S5P_WAKEUP_MASK); >> - >> + if (soc_is_exynos5420()) { >> + tmp = __raw_readl(S5P_WAKEUP_MASK); >> + tmp |= ((0x7F << 7) | (0x1F << 1)); >> + __raw_writel(tmp, S5P_WAKEUP_MASK); >> + } else { >> + tmp = __raw_readl(S5P_WAKEUP_MASK); >> + tmp |= ((0xFF << 8) | (0x1F << 1)); >> + __raw_writel(tmp, S5P_WAKEUP_MASK); >> + } >> register_syscore_ops(&exynos_pm_syscore_ops); >> suspend_set_ops(&exynos_suspend_ops); >> } >> diff --git a/arch/arm/mach-exynos/regs-pmu.h >> b/arch/arm/mach-exynos/regs-pmu.h >> index cfbfc575..53eac2b 100644 >> --- a/arch/arm/mach-exynos/regs-pmu.h >> +++ b/arch/arm/mach-exynos/regs-pmu.h >> @@ -39,6 +39,7 @@ >> #define S5P_INFORM6 S5P_PMUREG(0x0818) >> #define S5P_INFORM7 S5P_PMUREG(0x081C) >> >> +#define S5P_PMU_SPARE3 S5P_PMUREG(0x090C) >> #define EXYNOS_IROM_DATA2 S5P_PMUREG(0x0988) >> >> #define S5P_ARM_CORE0_LOWPWR S5P_PMUREG(0x1000) >> @@ -113,7 +114,6 @@ >> #define EXYNOS5_ARM_L2_OPTION S5P_PMUREG(0x2608) >> #define EXYNOS5_USE_RETENTION BIT(4) >> >> - >> #define S5P_PAD_RET_MAUDIO_OPTION S5P_PMUREG(0x3028) >> #define S5P_PAD_RET_GPIO_OPTION S5P_PMUREG(0x3108) >> #define S5P_PAD_RET_UART_OPTION S5P_PMUREG(0x3128) >> @@ -216,6 +216,8 @@ >> >> /* For EXYNOS5 */ >> >> +#define EXYNOS5_SYS_DISP1_BLK_CFG S5P_SYSREG(0x0214) >> + >> #define EXYNOS5_SYS_I2C_CFG >> S5P_SYSREG(0x0234) >> >> #define EXYNOS5_AUTO_WDTRESET_DISABLE >> S5P_PMUREG(0x0408) >> diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h >> b/arch/arm/plat-samsung/include/plat/map-s5p.h >> index c186786..cfb150e 100644 >> --- a/arch/arm/plat-samsung/include/plat/map-s5p.h >> +++ b/arch/arm/plat-samsung/include/plat/map-s5p.h >> @@ -57,6 +57,8 @@ >> #define S3C_UART_OFFSET (0x400) >> #endif >> >> +#define EXYNOS5420_VA_CPU_STATE (S5P_VA_SYSRAM + 0x28) >> + > > > Please, no more static addresses. This should be defined as an offset to > SYSRAM in the source file that actually uses it. OK. > > >> #include <plat/map-s3c.h> >> >> #endif /* __ASM_PLAT_MAP_S5P_H */ >> diff --git a/drivers/clk/samsung/clk-exynos5420.c >> b/drivers/clk/samsung/clk-exynos5420.c >> index 60b2681..965ea69 100644 >> --- a/drivers/clk/samsung/clk-exynos5420.c >> +++ b/drivers/clk/samsung/clk-exynos5420.c >> @@ -101,6 +101,19 @@ >> #define KPLL_CON0 0x28100 >> #define SRC_KFC 0x28200 >> #define DIV_KFC0 0x28500 >> +#define SRC_MASK_CPERI 0x04300 > > > Please keep the registers sorted... OK. > > >> +#define SRC_MASK_TOP0 0x10300 >> +#define SRC_MASK_TOP1 0x10304 >> +#define SRC_MASK_TOP2 0x10308 >> +#define SRC_MASK_TOP7 0x1031C >> +#define SRC_MASK_MAU 0x10334 >> +#define SRC_MASK_FSYS 0x10340 >> +#define SRC_MASK_PERIC0 0x10350 >> +#define SRC_MASK_PERIC1 0x10354 >> +#define SRC_MASK_ISP 0x10370 >> +#define GATE_BUS_DISP1 0x10728 >> +#define GATE_IP_PERIC 0x10950 >> + >> >> /* list of PLLs */ >> enum exynos5420_plls { >> @@ -180,11 +193,30 @@ static unsigned long exynos5420_clk_regs[] >> __initdata = { >> DIV_KFC0, >> }; >> >> +static const struct samsung_clk_reg_dump exynos5420_set_clksrc[] = { >> + { .offset = SRC_MASK_CPERI, .value = 0xffffffff, }, >> + { .offset = SRC_MASK_TOP0, .value = 0x11111111, }, >> + { .offset = SRC_MASK_TOP1, .value = 0x11101111, }, >> + { .offset = SRC_MASK_TOP2, .value = 0x11111110, }, >> + { .offset = SRC_MASK_TOP7, .value = 0x00111100, }, >> + { .offset = SRC_MASK_DISP10, .value = 0x11111110, }, >> + { .offset = SRC_MASK_MAU, .value = 0x10000000, }, >> + { .offset = SRC_MASK_FSYS, .value = 0x11111110, }, >> + { .offset = SRC_MASK_PERIC0, .value = 0x11111110, }, >> + { .offset = SRC_MASK_PERIC1, .value = 0x11111100, }, >> + { .offset = SRC_MASK_ISP, .value = 0x11111000, }, >> + { .offset = GATE_BUS_DISP1, .value = 0xffffffff, }, >> + { .offset = GATE_IP_PERIC, .value = 0xffffffff, }, >> +}; >> + >> + >> static int exynos5420_clk_suspend(void) >> { >> samsung_clk_save(reg_base, exynos5420_save, >> ARRAY_SIZE(exynos5420_clk_regs)); >> >> + samsung_clk_restore(reg_base, exynos5420_set_clksrc, >> + >> ARRAY_SIZE(exynos5420_set_clksrc)); > > > nit: You could align ARRAY_SIZE to the same indentation level as the call to > samsung_clk_save() above. OK. > > Best regards, > Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 15af0ce..aa3c2c8 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -59,6 +59,16 @@ static struct sleep_save exynos_core_save[] = { SAVE_ITEM(S5P_SROM_BC3), }; +static struct sleep_save exynos5420_cpustate_save[] = { + SAVE_ITEM(EXYNOS5420_VA_CPU_STATE), +}; + +static struct sleep_save exynos5420_reg_save[] = { + SAVE_ITEM(EXYNOS5_SYS_DISP1_BLK_CFG), + SAVE_ITEM(S5P_PMU_SPARE3), +}; + + /* * GIC wake-up support */ @@ -81,7 +91,7 @@ static int exynos_irq_set_wake(struct irq_data *data, unsigned int state) { const struct exynos_wkup_irq *wkup_irq; - if (soc_is_exynos5250()) + if (soc_is_exynos5250() || soc_is_exynos5420()) wkup_irq = exynos5250_wkup_irq; else wkup_irq = exynos4_wkup_irq; @@ -109,7 +119,15 @@ static int exynos_cpu_suspend(unsigned long arg) outer_flush_all(); #endif - if (soc_is_exynos5250()) + /* + * Clear IRAM register for cpu state so that primary CPU does + * not enter low power start in U-Boot. + * This is specific to exynos5420 SoC only. + */ + if (soc_is_exynos5420()) + __raw_writel(0x0, EXYNOS5420_VA_CPU_STATE); + + if (soc_is_exynos5250() || soc_is_exynos5420()) flush_cache_all(); /* issue the standby signal into the pm unit. */ @@ -135,6 +153,20 @@ static void exynos_pm_prepare(void) tmp = __raw_readl(EXYNOS5_JPEG_MEM_OPTION); tmp &= ~EXYNOS5_OPTION_USE_RETENTION; __raw_writel(tmp, EXYNOS5_JPEG_MEM_OPTION); + } else if (soc_is_exynos5420()) { + + s3c_pm_do_save(exynos5420_reg_save, + ARRAY_SIZE(exynos5420_reg_save)); + + /* + * The cpu state needs to be saved and restored so that the + * secondary CPUs will enter low power start. Though the U-Boot + * is setting the cpu state with low power flag, the kernel + * needs to restore it back in case, the primary cpu fails to + * suspend for any reason + */ + s3c_pm_do_save(exynos5420_cpustate_save, + ARRAY_SIZE(exynos5420_cpustate_save)); } /* Set value of power down register for sleep mode */ @@ -145,11 +177,34 @@ static void exynos_pm_prepare(void) /* ensure at least INFORM0 has the resume address */ __raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0); + + if (soc_is_exynos5420()) { + + tmp = __raw_readl(EXYNOS5_ARM_L2_OPTION); + tmp &= ~EXYNOS5_USE_RETENTION; + __raw_writel(tmp, EXYNOS5_ARM_L2_OPTION); + + tmp = __raw_readl(EXYNOS5420_SFR_AXI_CGDIS1); + tmp |= EXYNOS5420_UFS; + __raw_writel(tmp, EXYNOS5420_SFR_AXI_CGDIS1); + + tmp = __raw_readl(EXYNOS5420_ARM_COMMON_OPTION); + tmp &= ~EXYNOS5420_L2RSTDISABLE_VALUE; + __raw_writel(tmp, EXYNOS5420_ARM_COMMON_OPTION); + tmp = __raw_readl(EXYNOS5420_FSYS2_OPTION); + tmp |= EXYNOS5420_EMULATION; + __raw_writel(tmp, EXYNOS5420_FSYS2_OPTION); + tmp = __raw_readl(EXYNOS5420_PSGEN_OPTION); + tmp |= EXYNOS5420_EMULATION; + __raw_writel(tmp, EXYNOS5420_PSGEN_OPTION); + } + } static int exynos_pm_suspend(void) { unsigned long tmp; + unsigned long cluster_id; /* Setting Central Sequence Register for power down mode */ @@ -159,10 +214,20 @@ static int exynos_pm_suspend(void) /* Setting SEQ_OPTION register */ - tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0); - __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); + if (soc_is_exynos5420()) { + cluster_id = (read_cpuid(CPUID_MPIDR) >> 8) & 0xf; + if (!cluster_id) + __raw_writel(EXYNOS5420_ARM_USE_STANDBY_WFI0, + S5P_CENTRAL_SEQ_OPTION); + else + __raw_writel(EXYNOS5420_KFC_USE_STANDBY_WFI0, + S5P_CENTRAL_SEQ_OPTION); + } else { + tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0); + __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); + } - if (!soc_is_exynos5250()) { + if (!(soc_is_exynos5250() || soc_is_exynos5420())) { /* Save Power control register */ asm ("mrc p15, 0, %0, c15, c0, 0" : "=r" (tmp) : : "cc"); @@ -181,6 +246,15 @@ static void exynos_pm_resume(void) { unsigned long tmp; + if (soc_is_exynos5420()) { + /* Restore the IRAM register cpu state */ + s3c_pm_do_restore(exynos5420_cpustate_save, + ARRAY_SIZE(exynos5420_cpustate_save)); + + __raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL, + S5P_CENTRAL_SEQ_OPTION); + } + /* * If PMU failed while entering sleep mode, WFI will be * ignored by PMU and then exiting cpu_do_idle(). @@ -196,7 +270,8 @@ static void exynos_pm_resume(void) /* No need to perform below restore code */ goto early_wakeup; } - if (!soc_is_exynos5250()) { + + if (!(soc_is_exynos5250() || soc_is_exynos5420())) { /* Restore Power control register */ tmp = save_arm_register[0]; asm volatile ("mcr p15, 0, %0, c15, c0, 0" @@ -212,25 +287,57 @@ static void exynos_pm_resume(void) /* For release retention */ - __raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION); - __raw_writel((1 << 28), S5P_PAD_RET_GPIO_OPTION); - __raw_writel((1 << 28), S5P_PAD_RET_UART_OPTION); - __raw_writel((1 << 28), S5P_PAD_RET_MMCA_OPTION); - __raw_writel((1 << 28), S5P_PAD_RET_MMCB_OPTION); - __raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION); - __raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION); + if (soc_is_exynos5250()) { + __raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION); + __raw_writel((1 << 28), S5P_PAD_RET_GPIO_OPTION); + __raw_writel((1 << 28), S5P_PAD_RET_UART_OPTION); + __raw_writel((1 << 28), S5P_PAD_RET_MMCA_OPTION); + __raw_writel((1 << 28), S5P_PAD_RET_MMCB_OPTION); + __raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION); + __raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION); + } else if (soc_is_exynos5420()) { + __raw_writel(1 << 28, EXYNOS_PAD_RET_DRAM_OPTION); + __raw_writel(1 << 28, EXYNOS_PAD_RET_MAUDIO_OPTION); + __raw_writel(1 << 28, EXYNOS_PAD_RET_JTAG_OPTION); + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_GPIO_OPTION); + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_UART_OPTION); + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_MMCA_OPTION); + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_MMCB_OPTION); + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_MMCC_OPTION); + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_HSI_OPTION); + __raw_writel(1 << 28, EXYNOS_PAD_RET_EBIA_OPTION); + __raw_writel(1 << 28, EXYNOS_PAD_RET_EBIB_OPTION); + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_SPI_OPTION); + __raw_writel(1 << 28, EXYNOS5420_PAD_RET_DRAM_COREBLK_OPTION); + } if (soc_is_exynos5250()) s3c_pm_do_restore(exynos5_sys_save, ARRAY_SIZE(exynos5_sys_save)); + else if (soc_is_exynos5420()) + s3c_pm_do_restore(exynos5420_reg_save, + ARRAY_SIZE(exynos5420_reg_save)); s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - if (IS_ENABLED(CONFIG_SMP) && !soc_is_exynos5250()) + if (IS_ENABLED(CONFIG_SMP) && + !soc_is_exynos5250() && !soc_is_exynos5420()) scu_enable(S5P_VA_SCU); early_wakeup: + if (soc_is_exynos5420()) { + tmp = __raw_readl(EXYNOS5420_SFR_AXI_CGDIS1); + tmp &= ~EXYNOS5420_UFS; + __raw_writel(tmp, EXYNOS5420_SFR_AXI_CGDIS1); + tmp = __raw_readl(EXYNOS5420_FSYS2_OPTION); + tmp &= ~EXYNOS5420_EMULATION; + __raw_writel(tmp, EXYNOS5420_FSYS2_OPTION); + tmp = __raw_readl(EXYNOS5420_PSGEN_OPTION); + tmp &= ~EXYNOS5420_EMULATION; + __raw_writel(tmp, EXYNOS5420_PSGEN_OPTION); + } + /* Clear SLEEP mode set in INFORM1 */ __raw_writel(0x0, S5P_INFORM1); @@ -312,10 +419,15 @@ void __init exynos_pm_init(void) gic_arch_extn.irq_set_wake = exynos_irq_set_wake; /* All wakeup disable */ - tmp = __raw_readl(S5P_WAKEUP_MASK); - tmp |= ((0xFF << 8) | (0x1F << 1)); - __raw_writel(tmp, S5P_WAKEUP_MASK); - + if (soc_is_exynos5420()) { + tmp = __raw_readl(S5P_WAKEUP_MASK); + tmp |= ((0x7F << 7) | (0x1F << 1)); + __raw_writel(tmp, S5P_WAKEUP_MASK); + } else { + tmp = __raw_readl(S5P_WAKEUP_MASK); + tmp |= ((0xFF << 8) | (0x1F << 1)); + __raw_writel(tmp, S5P_WAKEUP_MASK); + } register_syscore_ops(&exynos_pm_syscore_ops); suspend_set_ops(&exynos_suspend_ops); } diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h index cfbfc575..53eac2b 100644 --- a/arch/arm/mach-exynos/regs-pmu.h +++ b/arch/arm/mach-exynos/regs-pmu.h @@ -39,6 +39,7 @@ #define S5P_INFORM6 S5P_PMUREG(0x0818) #define S5P_INFORM7 S5P_PMUREG(0x081C) +#define S5P_PMU_SPARE3 S5P_PMUREG(0x090C) #define EXYNOS_IROM_DATA2 S5P_PMUREG(0x0988) #define S5P_ARM_CORE0_LOWPWR S5P_PMUREG(0x1000) @@ -113,7 +114,6 @@ #define EXYNOS5_ARM_L2_OPTION S5P_PMUREG(0x2608) #define EXYNOS5_USE_RETENTION BIT(4) - #define S5P_PAD_RET_MAUDIO_OPTION S5P_PMUREG(0x3028) #define S5P_PAD_RET_GPIO_OPTION S5P_PMUREG(0x3108) #define S5P_PAD_RET_UART_OPTION S5P_PMUREG(0x3128) @@ -216,6 +216,8 @@ /* For EXYNOS5 */ +#define EXYNOS5_SYS_DISP1_BLK_CFG S5P_SYSREG(0x0214) + #define EXYNOS5_SYS_I2C_CFG S5P_SYSREG(0x0234) #define EXYNOS5_AUTO_WDTRESET_DISABLE S5P_PMUREG(0x0408) diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h index c186786..cfb150e 100644 --- a/arch/arm/plat-samsung/include/plat/map-s5p.h +++ b/arch/arm/plat-samsung/include/plat/map-s5p.h @@ -57,6 +57,8 @@ #define S3C_UART_OFFSET (0x400) #endif +#define EXYNOS5420_VA_CPU_STATE (S5P_VA_SYSRAM + 0x28) + #include <plat/map-s3c.h> #endif /* __ASM_PLAT_MAP_S5P_H */ diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c index 60b2681..965ea69 100644 --- a/drivers/clk/samsung/clk-exynos5420.c +++ b/drivers/clk/samsung/clk-exynos5420.c @@ -101,6 +101,19 @@ #define KPLL_CON0 0x28100 #define SRC_KFC 0x28200 #define DIV_KFC0 0x28500 +#define SRC_MASK_CPERI 0x04300 +#define SRC_MASK_TOP0 0x10300 +#define SRC_MASK_TOP1 0x10304 +#define SRC_MASK_TOP2 0x10308 +#define SRC_MASK_TOP7 0x1031C +#define SRC_MASK_MAU 0x10334 +#define SRC_MASK_FSYS 0x10340 +#define SRC_MASK_PERIC0 0x10350 +#define SRC_MASK_PERIC1 0x10354 +#define SRC_MASK_ISP 0x10370 +#define GATE_BUS_DISP1 0x10728 +#define GATE_IP_PERIC 0x10950 + /* list of PLLs */ enum exynos5420_plls { @@ -180,11 +193,30 @@ static unsigned long exynos5420_clk_regs[] __initdata = { DIV_KFC0, }; +static const struct samsung_clk_reg_dump exynos5420_set_clksrc[] = { + { .offset = SRC_MASK_CPERI, .value = 0xffffffff, }, + { .offset = SRC_MASK_TOP0, .value = 0x11111111, }, + { .offset = SRC_MASK_TOP1, .value = 0x11101111, }, + { .offset = SRC_MASK_TOP2, .value = 0x11111110, }, + { .offset = SRC_MASK_TOP7, .value = 0x00111100, }, + { .offset = SRC_MASK_DISP10, .value = 0x11111110, }, + { .offset = SRC_MASK_MAU, .value = 0x10000000, }, + { .offset = SRC_MASK_FSYS, .value = 0x11111110, }, + { .offset = SRC_MASK_PERIC0, .value = 0x11111110, }, + { .offset = SRC_MASK_PERIC1, .value = 0x11111100, }, + { .offset = SRC_MASK_ISP, .value = 0x11111000, }, + { .offset = GATE_BUS_DISP1, .value = 0xffffffff, }, + { .offset = GATE_IP_PERIC, .value = 0xffffffff, }, +}; + + static int exynos5420_clk_suspend(void) { samsung_clk_save(reg_base, exynos5420_save, ARRAY_SIZE(exynos5420_clk_regs)); + samsung_clk_restore(reg_base, exynos5420_set_clksrc, + ARRAY_SIZE(exynos5420_set_clksrc)); return 0; }