| Message ID | 1397481367-12652-3-git-send-email-sachin.kamat@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Sachin, On Mon, Apr 14, 2014 at 6:16 AM, Sachin Kamat <sachin.kamat@linaro.org> wrote: > From: Doug Anderson <dianders@chromium.org> > > Added TPS65090 regulator related nodes to Snow board. > > Signed-off-by: Doug Anderson <dianders@chromium.org> > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > --- > arch/arm/boot/dts/exynos5250-snow.dts | 90 +++++++++++++++++++++++++++++++++ > 1 file changed, 90 insertions(+) > > diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts > index 469c85d..a38fd18 100644 > --- a/arch/arm/boot/dts/exynos5250-snow.dts > +++ b/arch/arm/boot/dts/exynos5250-snow.dts > @@ -44,6 +44,13 @@ > sd3_bus4: sd3-bus-width4 { > samsung,pin-drv = <0>; > }; > + > + tps65090_irq: tps65090-irq { > + samsung,pins = "gpx2-6"; > + samsung,pin-function = <0>; > + samsung,pin-pud = <0>; > + samsung,pin-drv = <0>; > + }; > }; > > pinctrl@13400000 { > @@ -75,6 +82,12 @@ > }; > }; > > + vbat: vbat-fixed-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vbat-supply"; > + regulator-boot-on; > + }; > + > i2c-arbitrator { > compatible = "i2c-arb-gpio-challenge"; > #address-cells = <1>; > @@ -201,6 +214,83 @@ > 0x070c0069>; /* LEFT */ > }; > }; > + > + power-regulator { > + compatible = "ti,tps65090"; > + reg = <0x48>; > + > + /* > + * Config irq to disable internal pulls > + * even though we run in polling mode. This comment refers to a feature that hasn't yet been sent upstream. ...but it's a good reminder and I can send it upstream now. You can see it at: * https://chromium-review.googlesource.com/62630 * https://chromium-review.googlesource.com/175653 Since this is only a comment I guess it's OK to refer to a feature that hasn't yet landed (?). > + */ > + pinctrl-names = "default"; > + pinctrl-0 = <&tps65090_irq>; > + > + vsys1-supply = <&vbat>; > + vsys2-supply = <&vbat>; > + vsys3-supply = <&vbat>; > + infet1-supply = <&vbat>; > + infet2-supply = <&vbat>; > + infet3-supply = <&vbat>; > + infet4-supply = <&vbat>; > + infet5-supply = <&vbat>; > + infet6-supply = <&vbat>; > + infet7-supply = <&vbat>; > + vsys-l1-supply = <&vbat>; > + vsys-l2-supply = <&vbat>; > + > + regulators { > + dcdc1 { > + ti,enable-ext-control; > + }; > + dcdc2 { > + ti,enable-ext-control; > + }; > + dcdc3 { > + ti,enable-ext-control; > + }; > + fet1 { > + regulator-name = "vcd_led"; > + ti,overcurrent-wait = <3>; This is also referring to something that hasn't been sent upstream yet. See: * https://chromium-review.googlesource.com/184607 > + }; > + tps65090_fet2: fet2 { > + regulator-name = "video_mid"; > + regulator-always-on; > + ti,overcurrent-wait = <3>; > + }; > + fet3 { > + regulator-name = "wwan_r"; > + regulator-always-on; > + ti,overcurrent-wait = <3>; > + }; > + fet4 { > + regulator-name = "sdcard"; > + ti,overcurrent-wait = <3>; > + }; > + fet5 { > + regulator-name = "camout"; > + regulator-always-on; > + ti,overcurrent-wait = <3>; > + }; > + fet6 { > + regulator-name = "lcd_vdd"; > + ti,overcurrent-wait = <3>; > + }; > + tps65090_fet7: fet7 { > + regulator-name = "video_mid_1a"; > + regulator-always-on; > + ti,overcurrent-wait = <3>; > + }; > + ldo1 { > + }; > + ldo2 { > + }; > + }; > + > + charger { > + compatible = "ti,tps65090-charger"; > + }; I'm nearly certain that the charger will be pretty unhappy without the polling mode change mentioned above. > + }; > }; > }; > -Doug -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Doug, On 15 April 2014 04:13, Doug Anderson <dianders@chromium.org> wrote: > Sachin, > > On Mon, Apr 14, 2014 at 6:16 AM, Sachin Kamat <sachin.kamat@linaro.org> wrote: >> From: Doug Anderson <dianders@chromium.org> >> >> Added TPS65090 regulator related nodes to Snow board. >> >> Signed-off-by: Doug Anderson <dianders@chromium.org> >> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> >> --- >> arch/arm/boot/dts/exynos5250-snow.dts | 90 +++++++++++++++++++++++++++++++++ >> 1 file changed, 90 insertions(+) >> >> diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts >> index 469c85d..a38fd18 100644 >> --- a/arch/arm/boot/dts/exynos5250-snow.dts >> +++ b/arch/arm/boot/dts/exynos5250-snow.dts >> @@ -44,6 +44,13 @@ >> sd3_bus4: sd3-bus-width4 { >> samsung,pin-drv = <0>; >> }; >> + >> + tps65090_irq: tps65090-irq { >> + samsung,pins = "gpx2-6"; >> + samsung,pin-function = <0>; >> + samsung,pin-pud = <0>; >> + samsung,pin-drv = <0>; >> + }; >> }; >> >> pinctrl@13400000 { >> @@ -75,6 +82,12 @@ >> }; >> }; >> >> + vbat: vbat-fixed-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "vbat-supply"; >> + regulator-boot-on; >> + }; >> + >> i2c-arbitrator { >> compatible = "i2c-arb-gpio-challenge"; >> #address-cells = <1>; >> @@ -201,6 +214,83 @@ >> 0x070c0069>; /* LEFT */ >> }; >> }; >> + >> + power-regulator { >> + compatible = "ti,tps65090"; >> + reg = <0x48>; >> + >> + /* >> + * Config irq to disable internal pulls >> + * even though we run in polling mode. > > This comment refers to a feature that hasn't yet been sent upstream. > ...but it's a good reminder and I can send it upstream now. You can > see it at: > > * https://chromium-review.googlesource.com/62630 > * https://chromium-review.googlesource.com/175653 > > Since this is only a comment I guess it's OK to refer to a feature > that hasn't yet landed (?). > > >> + */ >> + pinctrl-names = "default"; >> + pinctrl-0 = <&tps65090_irq>; >> + >> + vsys1-supply = <&vbat>; >> + vsys2-supply = <&vbat>; >> + vsys3-supply = <&vbat>; >> + infet1-supply = <&vbat>; >> + infet2-supply = <&vbat>; >> + infet3-supply = <&vbat>; >> + infet4-supply = <&vbat>; >> + infet5-supply = <&vbat>; >> + infet6-supply = <&vbat>; >> + infet7-supply = <&vbat>; >> + vsys-l1-supply = <&vbat>; >> + vsys-l2-supply = <&vbat>; >> + >> + regulators { >> + dcdc1 { >> + ti,enable-ext-control; >> + }; >> + dcdc2 { >> + ti,enable-ext-control; >> + }; >> + dcdc3 { >> + ti,enable-ext-control; >> + }; >> + fet1 { >> + regulator-name = "vcd_led"; >> + ti,overcurrent-wait = <3>; > > This is also referring to something that hasn't been sent upstream yet. See: > * https://chromium-review.googlesource.com/184607 > >> + }; >> + tps65090_fet2: fet2 { >> + regulator-name = "video_mid"; >> + regulator-always-on; >> + ti,overcurrent-wait = <3>; >> + }; >> + fet3 { >> + regulator-name = "wwan_r"; >> + regulator-always-on; >> + ti,overcurrent-wait = <3>; >> + }; >> + fet4 { >> + regulator-name = "sdcard"; >> + ti,overcurrent-wait = <3>; >> + }; >> + fet5 { >> + regulator-name = "camout"; >> + regulator-always-on; >> + ti,overcurrent-wait = <3>; >> + }; >> + fet6 { >> + regulator-name = "lcd_vdd"; >> + ti,overcurrent-wait = <3>; >> + }; >> + tps65090_fet7: fet7 { >> + regulator-name = "video_mid_1a"; >> + regulator-always-on; >> + ti,overcurrent-wait = <3>; >> + }; >> + ldo1 { >> + }; >> + ldo2 { >> + }; >> + }; >> + >> + charger { >> + compatible = "ti,tps65090-charger"; >> + }; > > I'm nearly certain that the charger will be pretty unhappy without the > polling mode change mentioned above. Since the patches that you pointed out were in the internal tree, did not realise they had not yet hit mainline. This patch should certainly come after that.
Sachin, On Mon, Apr 14, 2014 at 6:16 AM, Sachin Kamat <sachin.kamat@linaro.org> wrote: > From: Doug Anderson <dianders@chromium.org> > > Added TPS65090 regulator related nodes to Snow board. > > Signed-off-by: Doug Anderson <dianders@chromium.org> > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > --- > arch/arm/boot/dts/exynos5250-snow.dts | 90 +++++++++++++++++++++++++++++++++ > 1 file changed, 90 insertions(+) I've now sent up the relevant patches: * https://patchwork.kernel.org/patch/3995361/ * https://patchwork.kernel.org/patch/3995401/ * https://patchwork.kernel.org/patch/3995411/ So assuming those land then I think we're all good with this one. I've also done basic testing with it. Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 469c85d..a38fd18 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -44,6 +44,13 @@ sd3_bus4: sd3-bus-width4 { samsung,pin-drv = <0>; }; + + tps65090_irq: tps65090-irq { + samsung,pins = "gpx2-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; pinctrl@13400000 { @@ -75,6 +82,12 @@ }; }; + vbat: vbat-fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "vbat-supply"; + regulator-boot-on; + }; + i2c-arbitrator { compatible = "i2c-arb-gpio-challenge"; #address-cells = <1>; @@ -201,6 +214,83 @@ 0x070c0069>; /* LEFT */ }; }; + + power-regulator { + compatible = "ti,tps65090"; + reg = <0x48>; + + /* + * Config irq to disable internal pulls + * even though we run in polling mode. + */ + pinctrl-names = "default"; + pinctrl-0 = <&tps65090_irq>; + + vsys1-supply = <&vbat>; + vsys2-supply = <&vbat>; + vsys3-supply = <&vbat>; + infet1-supply = <&vbat>; + infet2-supply = <&vbat>; + infet3-supply = <&vbat>; + infet4-supply = <&vbat>; + infet5-supply = <&vbat>; + infet6-supply = <&vbat>; + infet7-supply = <&vbat>; + vsys-l1-supply = <&vbat>; + vsys-l2-supply = <&vbat>; + + regulators { + dcdc1 { + ti,enable-ext-control; + }; + dcdc2 { + ti,enable-ext-control; + }; + dcdc3 { + ti,enable-ext-control; + }; + fet1 { + regulator-name = "vcd_led"; + ti,overcurrent-wait = <3>; + }; + tps65090_fet2: fet2 { + regulator-name = "video_mid"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet3 { + regulator-name = "wwan_r"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet4 { + regulator-name = "sdcard"; + ti,overcurrent-wait = <3>; + }; + fet5 { + regulator-name = "camout"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet6 { + regulator-name = "lcd_vdd"; + ti,overcurrent-wait = <3>; + }; + tps65090_fet7: fet7 { + regulator-name = "video_mid_1a"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + ldo1 { + }; + ldo2 { + }; + }; + + charger { + compatible = "ti,tps65090-charger"; + }; + }; }; };