| Message ID | 1397643118-6934-2-git-send-email-cw00.choi@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Chanwoo, On 16.04.2014 12:11, Chanwoo Choi wrote: > This patch control special clock for ADC in Exynos series's FSYS block. > If special clock of ADC is registerd on clock list of common clk framework, > Exynos ADC drvier have to control this clock. > > Exynos3250/Exynos4/Exynos5 has 'adc' clock as following: > - 'adc' clock: bus clock for ADC > > Exynos3250 has additional 'sclk_tsadc' clock as following: > - 'sclk_tsadc' clock: special clock for ADC which provide clock to internal ADC > > Exynos 4210/4212/4412 and Exynos5250/5420 has not included 'sclk_tsadc' clock > in FSYS_BLK. But, Exynos3250 based on Cortex-A7 has only included 'sclk_tsadc' > clock in FSYS_BLK. > > Cc: Jonathan Cameron <jic23@kernel.org> > Cc: Kukjin Kim <kgene.kim@samsung.com> > Cc: Naveen Krishna Chatradhi > Cc: linux-iio@vger.kernel.org > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> > Acked-by: Kyungmin Park <kyungmin.park@samsung.com> > --- > drivers/iio/adc/exynos_adc.c | 86 +++++++++++++++++++++++++++++++++++++------- > 1 file changed, 73 insertions(+), 13 deletions(-) > > diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c > index d25b262..486771e 100644 > --- a/drivers/iio/adc/exynos_adc.c > +++ b/drivers/iio/adc/exynos_adc.c > @@ -40,8 +40,9 @@ > #include <linux/iio/driver.h> > > enum adc_version { > - ADC_V1, > - ADC_V2 > + ADC_V1 = 0x1, > + ADC_V2 = 0x2, > + ADC_V3 = (ADC_V1 | ADC_V2), I don't think Exynos3250 has really a V3 of the ADC block. It looks like a V2, just with different integration details. This approach is confusing and will create problems if real V3 shows up. In general, using a version enum and a lot of ifs for particular versions in the code is rather a bad practice, especially when multiple versions happen to require the same quirks. Instead, a variant struct should be introduced with bitfields for particular quirks and/or register offsets and/or function pointers. Let me show example solutions inline with your changes below. > }; > > /* EXYNOS4412/5250 ADC_V1 registers definitions */ > @@ -85,9 +86,11 @@ enum adc_version { > #define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(1000)) > > struct exynos_adc { > + struct device *dev; > void __iomem *regs; > void __iomem *enable_reg; > struct clk *clk; > + struct clk *sclk; > unsigned int irq; > struct regulator *vdd; > > @@ -100,6 +103,7 @@ struct exynos_adc { > static const struct of_device_id exynos_adc_match[] = { > { .compatible = "samsung,exynos-adc-v1", .data = (void *)ADC_V1 }, > { .compatible = "samsung,exynos-adc-v2", .data = (void *)ADC_V2 }, > + { .compatible = "samsung,exynos-adc-v3", .data = (void *)ADC_V3 }, > {}, > }; > MODULE_DEVICE_TABLE(of, exynos_adc_match); > @@ -128,7 +132,7 @@ static int exynos_read_raw(struct iio_dev *indio_dev, > mutex_lock(&indio_dev->mlock); > > /* Select the channel to be used and Trigger conversion */ > - if (info->version == ADC_V2) { > + if (info->version >= ADC_V2) { > con2 = readl(ADC_V2_CON2(info->regs)); > con2 &= ~ADC_V2_CON2_ACH_MASK; > con2 |= ADC_V2_CON2_ACH_SEL(chan->address); This function should be split into exynos_adc_v1_read_raw() and exynos_adc_v2_read_raw(). Then a function pointer for int (*read_raw)(...) should be added to the variant struct I mentioned above. Then the generic part of existing exynos_read_raw() would just call variant->read_raw(). > @@ -165,7 +169,7 @@ static irqreturn_t exynos_adc_isr(int irq, void *dev_id) > info->value = readl(ADC_V1_DATX(info->regs)) & > ADC_DATX_MASK; > /* clear irq */ > - if (info->version == ADC_V2) > + if (info->version >= ADC_V2) > writel(1, ADC_V2_INT_ST(info->regs)); > else > writel(1, ADC_V1_INTCLR(info->regs)); void (*clear_irq)(). > @@ -226,11 +230,43 @@ static int exynos_adc_remove_devices(struct device *dev, void *c) > return 0; > } > > +static int exynos_adc_enable_clock(struct exynos_adc *info, bool enable) > +{ > + int ret; > + > + if (enable) { > + ret = clk_prepare_enable(info->clk); > + if (ret) { > + dev_err(info->dev, "failed to enable adc clock\n"); > + return ret; > + } > + if (info->version == ADC_V3) { Here, a bitfield bool needs_sclk:1; in the variant struct would be sufficient. > + ret = clk_prepare_enable(info->sclk); > + if (ret) { > + dev_err(info->dev, > + "failed to enable sclk_tsadc clock\n"); > + goto err; > + } > + } > + > + } else { > + if (info->version == ADC_V3) > + clk_disable_unprepare(info->sclk); > + clk_disable_unprepare(info->clk); > + } > + > + return 0; > +err: > + clk_disable_unprepare(info->clk); > + > + return ret; > +} Ugh. Please split this into exynos_adc_enable_clock() and exynos_adc_disable_clock(). > + > static void exynos_adc_hw_init(struct exynos_adc *info) > { > u32 con1, con2; > > - if (info->version == ADC_V2) { > + if (info->version >= ADC_V2) { > con1 = ADC_V2_CON1_SOFT_RESET; > writel(con1, ADC_V2_CON1(info->regs)); > This function should be completely split into v1_hw_init() and v2_hw_init() and the code calling currently exynos_adc_hw_init() could call variant->hw_init() directly. > @@ -287,6 +323,7 @@ static int exynos_adc_probe(struct platform_device *pdev) > } > > info->irq = irq; > + info->dev = &pdev->dev; > > init_completion(&info->completion); > > @@ -300,6 +337,8 @@ static int exynos_adc_probe(struct platform_device *pdev) > > writel(1, info->enable_reg); > > + info->version = exynos_adc_get_version(pdev); > + Instead of getting version, here a pointer to variant struct could be retrieved. > info->clk = devm_clk_get(&pdev->dev, "adc"); > if (IS_ERR(info->clk)) { > dev_err(&pdev->dev, "failed getting clock, err = %ld\n", > @@ -308,6 +347,16 @@ static int exynos_adc_probe(struct platform_device *pdev) > goto err_irq; > } > > + if (info->version == ADC_V3) { if (info->variant->needs_sclk) { > + info->sclk = devm_clk_get(&pdev->dev, "sclk_tsadc"); > + if (IS_ERR(info->sclk)) { > + ret = PTR_ERR(info->sclk); > + dev_warn(&pdev->dev, > + "failed getting sclk clock, err = %d\n", ret); > + goto err_irq; > + } > + } > + etc., etc. Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c index d25b262..486771e 100644 --- a/drivers/iio/adc/exynos_adc.c +++ b/drivers/iio/adc/exynos_adc.c @@ -40,8 +40,9 @@ #include <linux/iio/driver.h> enum adc_version { - ADC_V1, - ADC_V2 + ADC_V1 = 0x1, + ADC_V2 = 0x2, + ADC_V3 = (ADC_V1 | ADC_V2), }; /* EXYNOS4412/5250 ADC_V1 registers definitions */ @@ -85,9 +86,11 @@ enum adc_version { #define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(1000)) struct exynos_adc { + struct device *dev; void __iomem *regs; void __iomem *enable_reg; struct clk *clk; + struct clk *sclk; unsigned int irq; struct regulator *vdd; @@ -100,6 +103,7 @@ struct exynos_adc { static const struct of_device_id exynos_adc_match[] = { { .compatible = "samsung,exynos-adc-v1", .data = (void *)ADC_V1 }, { .compatible = "samsung,exynos-adc-v2", .data = (void *)ADC_V2 }, + { .compatible = "samsung,exynos-adc-v3", .data = (void *)ADC_V3 }, {}, }; MODULE_DEVICE_TABLE(of, exynos_adc_match); @@ -128,7 +132,7 @@ static int exynos_read_raw(struct iio_dev *indio_dev, mutex_lock(&indio_dev->mlock); /* Select the channel to be used and Trigger conversion */ - if (info->version == ADC_V2) { + if (info->version >= ADC_V2) { con2 = readl(ADC_V2_CON2(info->regs)); con2 &= ~ADC_V2_CON2_ACH_MASK; con2 |= ADC_V2_CON2_ACH_SEL(chan->address); @@ -165,7 +169,7 @@ static irqreturn_t exynos_adc_isr(int irq, void *dev_id) info->value = readl(ADC_V1_DATX(info->regs)) & ADC_DATX_MASK; /* clear irq */ - if (info->version == ADC_V2) + if (info->version >= ADC_V2) writel(1, ADC_V2_INT_ST(info->regs)); else writel(1, ADC_V1_INTCLR(info->regs)); @@ -226,11 +230,43 @@ static int exynos_adc_remove_devices(struct device *dev, void *c) return 0; } +static int exynos_adc_enable_clock(struct exynos_adc *info, bool enable) +{ + int ret; + + if (enable) { + ret = clk_prepare_enable(info->clk); + if (ret) { + dev_err(info->dev, "failed to enable adc clock\n"); + return ret; + } + if (info->version == ADC_V3) { + ret = clk_prepare_enable(info->sclk); + if (ret) { + dev_err(info->dev, + "failed to enable sclk_tsadc clock\n"); + goto err; + } + } + + } else { + if (info->version == ADC_V3) + clk_disable_unprepare(info->sclk); + clk_disable_unprepare(info->clk); + } + + return 0; +err: + clk_disable_unprepare(info->clk); + + return ret; +} + static void exynos_adc_hw_init(struct exynos_adc *info) { u32 con1, con2; - if (info->version == ADC_V2) { + if (info->version >= ADC_V2) { con1 = ADC_V2_CON1_SOFT_RESET; writel(con1, ADC_V2_CON1(info->regs)); @@ -287,6 +323,7 @@ static int exynos_adc_probe(struct platform_device *pdev) } info->irq = irq; + info->dev = &pdev->dev; init_completion(&info->completion); @@ -300,6 +337,8 @@ static int exynos_adc_probe(struct platform_device *pdev) writel(1, info->enable_reg); + info->version = exynos_adc_get_version(pdev); + info->clk = devm_clk_get(&pdev->dev, "adc"); if (IS_ERR(info->clk)) { dev_err(&pdev->dev, "failed getting clock, err = %ld\n", @@ -308,6 +347,16 @@ static int exynos_adc_probe(struct platform_device *pdev) goto err_irq; } + if (info->version == ADC_V3) { + info->sclk = devm_clk_get(&pdev->dev, "sclk_tsadc"); + if (IS_ERR(info->sclk)) { + ret = PTR_ERR(info->sclk); + dev_warn(&pdev->dev, + "failed getting sclk clock, err = %d\n", ret); + goto err_irq; + } + } + info->vdd = devm_regulator_get(&pdev->dev, "vdd"); if (IS_ERR(info->vdd)) { dev_err(&pdev->dev, "failed getting regulator, err = %ld\n", @@ -316,8 +365,6 @@ static int exynos_adc_probe(struct platform_device *pdev) goto err_irq; } - info->version = exynos_adc_get_version(pdev); - platform_set_drvdata(pdev, indio_dev); indio_dev->name = dev_name(&pdev->dev); @@ -340,7 +387,11 @@ static int exynos_adc_probe(struct platform_device *pdev) if (ret) goto err_iio_dev; - clk_prepare_enable(info->clk); + ret = exynos_adc_enable_clock(info, true); + if (ret) { + dev_err(&pdev->dev, "failed to enable clock\n"); + goto err_regulator; + } exynos_adc_hw_init(info); @@ -355,8 +406,9 @@ static int exynos_adc_probe(struct platform_device *pdev) err_of_populate: device_for_each_child(&pdev->dev, NULL, exynos_adc_remove_devices); + exynos_adc_enable_clock(info, false); +err_regulator: regulator_disable(info->vdd); - clk_disable_unprepare(info->clk); err_iio_dev: iio_device_unregister(indio_dev); err_irq: @@ -372,7 +424,7 @@ static int exynos_adc_remove(struct platform_device *pdev) device_for_each_child(&pdev->dev, NULL, exynos_adc_remove_devices); regulator_disable(info->vdd); - clk_disable_unprepare(info->clk); + exynos_adc_enable_clock(info, false); writel(0, info->enable_reg); iio_device_unregister(indio_dev); free_irq(info->irq, info); @@ -387,7 +439,7 @@ static int exynos_adc_suspend(struct device *dev) struct exynos_adc *info = iio_priv(indio_dev); u32 con; - if (info->version == ADC_V2) { + if (info->version >= ADC_V2) { con = readl(ADC_V2_CON1(info->regs)); con &= ~ADC_CON_EN_START; writel(con, ADC_V2_CON1(info->regs)); @@ -397,7 +449,7 @@ static int exynos_adc_suspend(struct device *dev) writel(con, ADC_V1_CON(info->regs)); } - clk_disable_unprepare(info->clk); + exynos_adc_enable_clock(info, false); writel(0, info->enable_reg); regulator_disable(info->vdd); @@ -415,11 +467,19 @@ static int exynos_adc_resume(struct device *dev) return ret; writel(1, info->enable_reg); - clk_prepare_enable(info->clk); + ret = exynos_adc_enable_clock(info, true); + if (ret) { + dev_err(dev, "failed to enable clock\n"); + goto err; + } exynos_adc_hw_init(info); return 0; +err: + regulator_disable(info->vdd); + + return ret; } #endif