| Message ID | 1397649051-3288-1-git-send-email-sachin.kamat@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On 04/16/2014 08:50 PM, Sachin Kamat wrote: > Instead of hardcoding the SYSRAM details for each SoC, > pass this information through device tree (DT) and make > the code SoC agnostic. > > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > --- > Rebased on latest linux-next. > --- > .../devicetree/bindings/arm/samsung-boards.txt | 11 +++ > arch/arm/boot/dts/exynos4210-universal_c210.dts | 9 ++ > arch/arm/boot/dts/exynos4210.dtsi | 10 ++ > arch/arm/boot/dts/exynos4x12.dtsi | 10 ++ > arch/arm/boot/dts/exynos5.dtsi | 5 + > arch/arm/boot/dts/exynos5250.dtsi | 5 + > arch/arm/boot/dts/exynos5420.dtsi | 5 + > arch/arm/mach-exynos/exynos.c | 104 ++++++++------------ > arch/arm/mach-exynos/include/mach/map.h | 7 -- > 9 files changed, 95 insertions(+), 71 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung-boards.txt > index 2168ed31e1b0..f79710eb7e79 100644 > --- a/Documentation/devicetree/bindings/arm/samsung-boards.txt > +++ b/Documentation/devicetree/bindings/arm/samsung-boards.txt > @@ -7,6 +7,17 @@ Required root node properties: > (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board. > (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC. > > + - sysram node, specifying the type (secure or non-secure) of SYSRAM > + - compatible: following types are supported > + "samsung,exynos4210-sysram" : Secure SYSRAM > + "samsung,exynos4210-sysram-ns" : Non-secure SYSRAM > + - reg: address of SYSRAM bank > + > + sysram@02020000 { > + compatible = "samsung,exynos4210-sysram"; > + reg = <0x02020000 0x1000>; > + }; > + > Optional: > - firmware node, specifying presence and type of secure firmware: > - compatible: only "samsung,secure-firmware" is currently supported > diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts > index 63e34b24b04f..cf4158728108 100644 > --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts > +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts > @@ -28,6 +28,15 @@ > bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; > }; > > + sysram@02020000 { > + status = "disabled"; > + }; > + > + sysram@02025000 { > + compatible = "samsung,exynos4210-sysram"; > + reg = <0x02025000 0x1000>; > + }; > + > mct@10050000 { > compatible = "none"; > }; > diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi > index cacf6140dd2f..a3f4bba099e6 100644 > --- a/arch/arm/boot/dts/exynos4210.dtsi > +++ b/arch/arm/boot/dts/exynos4210.dtsi > @@ -31,6 +31,16 @@ > pinctrl2 = &pinctrl_2; > }; > > + sysram@02020000 { > + compatible = "samsung,exynos4210-sysram"; > + reg = <0x02020000 0x1000>; > + }; > + > + sysram-ns@0203F000 { > + compatible = "samsung,exynos4210-sysram-ns"; > + reg = <0x0203F000 0x1000>; > + }; > + > pd_lcd1: lcd1-power-domain@10023CA0 { > compatible = "samsung,exynos4210-pd"; > reg = <0x10023CA0 0x20>; > diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi > index c4a9306f8529..d57e3120223f 100644 > --- a/arch/arm/boot/dts/exynos4x12.dtsi > +++ b/arch/arm/boot/dts/exynos4x12.dtsi > @@ -37,6 +37,16 @@ > interrupts = <2 2>, <3 2>, <18 2>, <19 2>; > }; > > + sysram@02020000 { > + compatible = "samsung,exynos4210-sysram"; > + reg = <0x02020000 0x1000>; > + }; > + > + sysram-ns@0204F000 { > + compatible = "samsung,exynos4210-sysram-ns"; > + reg = <0x0204F000 0x1000>; > + }; > + > pd_isp: isp-power-domain@10023CA0 { > compatible = "samsung,exynos4210-pd"; > reg = <0x10023CA0 0x20>; > diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi > index 79d0608d6dcc..c03bd09ec37d 100644 > --- a/arch/arm/boot/dts/exynos5.dtsi > +++ b/arch/arm/boot/dts/exynos5.dtsi > @@ -18,6 +18,11 @@ > / { > interrupt-parent = <&gic>; > > + sysram@02020000 { > + compatible = "samsung,exynos4210-sysram"; > + reg = <0x02020000 0x1000>; > + }; > + > chipid@10000000 { > compatible = "samsung,exynos4210-chipid"; > reg = <0x10000000 0x100>; > diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi > index 37423314a028..bae6c3f253f0 100644 > --- a/arch/arm/boot/dts/exynos5250.dtsi > +++ b/arch/arm/boot/dts/exynos5250.dtsi > @@ -72,6 +72,11 @@ > }; > }; > > + sysram-ns@0204F000 { > + compatible = "samsung,exynos4210-sysram-ns"; > + reg = <0x0204F000 0x1000>; > + }; > + > pd_gsc: gsc-power-domain@10044000 { > compatible = "samsung,exynos4210-pd"; > reg = <0x10044000 0x20>; > diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi > index c3a9a66c5767..217376fe1d82 100644 > --- a/arch/arm/boot/dts/exynos5420.dtsi > +++ b/arch/arm/boot/dts/exynos5420.dtsi > @@ -110,6 +110,11 @@ > }; > }; > > + sysram-ns@02073000 { > + compatible = "samsung,exynos4210-sysram-ns"; > + reg = <0x02073000 0x1000>; > + }; > + > clock: clock-controller@10010000 { > compatible = "samsung,exynos5420-clock"; > reg = <0x10010000 0x30000>; > diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c > index b32a907d021d..6a5fe18ec9b1 100644 > --- a/arch/arm/mach-exynos/exynos.c > +++ b/arch/arm/mach-exynos/exynos.c > @@ -114,51 +114,6 @@ static struct map_desc exynos4_iodesc[] __initdata = { > }, > }; > > -static struct map_desc exynos4_iodesc0[] __initdata = { > - { > - .virtual = (unsigned long)S5P_VA_SYSRAM, > - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0), > - .length = SZ_4K, > - .type = MT_DEVICE, > - }, > -}; > - > -static struct map_desc exynos4_iodesc1[] __initdata = { > - { > - .virtual = (unsigned long)S5P_VA_SYSRAM, > - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1), > - .length = SZ_4K, > - .type = MT_DEVICE, > - }, > -}; > - > -static struct map_desc exynos4210_iodesc[] __initdata = { > - { > - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, > - .pfn = __phys_to_pfn(EXYNOS4210_PA_SYSRAM_NS), > - .length = SZ_4K, > - .type = MT_DEVICE, > - }, > -}; > - > -static struct map_desc exynos4x12_iodesc[] __initdata = { > - { > - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, > - .pfn = __phys_to_pfn(EXYNOS4x12_PA_SYSRAM_NS), > - .length = SZ_4K, > - .type = MT_DEVICE, > - }, > -}; > - > -static struct map_desc exynos5250_iodesc[] __initdata = { > - { > - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, > - .pfn = __phys_to_pfn(EXYNOS5250_PA_SYSRAM_NS), > - .length = SZ_4K, > - .type = MT_DEVICE, > - }, > -}; > - > static struct map_desc exynos5_iodesc[] __initdata = { > { > .virtual = (unsigned long)S3C_VA_SYS, > @@ -181,11 +136,6 @@ static struct map_desc exynos5_iodesc[] __initdata = { > .length = SZ_4K, > .type = MT_DEVICE, > }, { > - .virtual = (unsigned long)S5P_VA_SYSRAM, > - .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM), > - .length = SZ_4K, > - .type = MT_DEVICE, > - }, { > .virtual = (unsigned long)S5P_VA_CMU, > .pfn = __phys_to_pfn(EXYNOS5_PA_CMU), > .length = 144 * SZ_1K, > @@ -268,6 +218,44 @@ static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, > return 1; > } > > +struct __sysram_desc { > + char name[32]; > + unsigned long addr; > +}; > + > +static struct __sysram_desc sysram_desc[] __initdata = { > + { > + .name = "samsung,exynos4210-sysram", > + .addr = (unsigned long)S5P_VA_SYSRAM, > + }, { > + .name = "samsung,exynos4210-sysram-ns", > + .addr = (unsigned long)S5P_VA_SYSRAM_NS, > + }, > +}; > + > +static int __init exynos_fdt_map_sysram(unsigned long node, const char *uname, > + int depth, void *data) > +{ > + struct map_desc iodesc; > + __be32 *reg; > + unsigned long len; > + int i; > + > + for (i = 0; i < ARRAY_SIZE(sysram_desc); i++) { > + if (of_flat_dt_is_compatible(node, sysram_desc[i].name)) { > + reg = of_get_flat_dt_prop(node, "reg", &len); > + if (!reg || len != (sizeof(unsigned long) * 2)) > + return -ENODEV; > + iodesc.virtual = sysram_desc[i].addr; > + iodesc.pfn = __phys_to_pfn(be32_to_cpu(reg[0])); > + iodesc.length = be32_to_cpu(reg[1]); > + iodesc.type = MT_DEVICE; > + iotable_init(&iodesc, 1); > + } > + } > + return 0; > +} > + > /* > * exynos_map_io > * > @@ -280,20 +268,6 @@ static void __init exynos_map_io(void) > > if (soc_is_exynos5()) > iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc)); > - > - if (soc_is_exynos4210()) { > - if (samsung_rev() == EXYNOS4210_REV_0) > - iotable_init(exynos4_iodesc0, > - ARRAY_SIZE(exynos4_iodesc0)); > - else > - iotable_init(exynos4_iodesc1, > - ARRAY_SIZE(exynos4_iodesc1)); > - iotable_init(exynos4210_iodesc, ARRAY_SIZE(exynos4210_iodesc)); > - } > - if (soc_is_exynos4212() || soc_is_exynos4412()) > - iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc)); > - if (soc_is_exynos5250()) > - iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc)); > } > > void __init exynos_init_io(void) > @@ -306,6 +280,8 @@ void __init exynos_init_io(void) > s5p_init_cpu(S5P_VA_CHIPID); > > exynos_map_io(); > + > + of_scan_flat_dt(exynos_fdt_map_sysram, NULL); > } > > struct bus_type exynos_subsys = { > diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h > index 7b046b59d9ec..548269a60634 100644 > --- a/arch/arm/mach-exynos/include/mach/map.h > +++ b/arch/arm/mach-exynos/include/mach/map.h > @@ -23,13 +23,6 @@ > > #include <plat/map-s5p.h> > > -#define EXYNOS4_PA_SYSRAM0 0x02025000 > -#define EXYNOS4_PA_SYSRAM1 0x02020000 > -#define EXYNOS5_PA_SYSRAM 0x02020000 > -#define EXYNOS4210_PA_SYSRAM_NS 0x0203F000 > -#define EXYNOS4x12_PA_SYSRAM_NS 0x0204F000 > -#define EXYNOS5250_PA_SYSRAM_NS 0x0204F000 > - > #define EXYNOS_PA_CHIPID 0x10000000 > > #define EXYNOS4_PA_SYSCON 0x10010000 > I tested this patch to turn on CPU1 of Exynos3250 without mapping static SYSRAM memory. Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Thanks, Chanwoo Choi -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wednesday 16 April 2014 17:20:51 Sachin Kamat wrote: > Instead of hardcoding the SYSRAM details for each SoC, > pass this information through device tree (DT) and make > the code SoC agnostic. > > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > --- > Rebased on latest linux-next. Thanks for sending this again. I'd like Heiko to have a look and provide an Ack if he's happy with it. It seems similar to what he did with the SRAM for mach-rockchip, and if it is we should use the same binding that he introduced, which would be a minor variation of this. Arnd > .../devicetree/bindings/arm/samsung-boards.txt | 11 +++ > arch/arm/boot/dts/exynos4210-universal_c210.dts | 9 ++ > arch/arm/boot/dts/exynos4210.dtsi | 10 ++ > arch/arm/boot/dts/exynos4x12.dtsi | 10 ++ > arch/arm/boot/dts/exynos5.dtsi | 5 + > arch/arm/boot/dts/exynos5250.dtsi | 5 + > arch/arm/boot/dts/exynos5420.dtsi | 5 + > arch/arm/mach-exynos/exynos.c | 104 ++++++++------------ > arch/arm/mach-exynos/include/mach/map.h | 7 -- > 9 files changed, 95 insertions(+), 71 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung-boards.txt > index 2168ed31e1b0..f79710eb7e79 100644 > --- a/Documentation/devicetree/bindings/arm/samsung-boards.txt > +++ b/Documentation/devicetree/bindings/arm/samsung-boards.txt > @@ -7,6 +7,17 @@ Required root node properties: > (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board. > (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC. > > + - sysram node, specifying the type (secure or non-secure) of SYSRAM > + - compatible: following types are supported > + "samsung,exynos4210-sysram" : Secure SYSRAM > + "samsung,exynos4210-sysram-ns" : Non-secure SYSRAM > + - reg: address of SYSRAM bank > + > + sysram@02020000 { > + compatible = "samsung,exynos4210-sysram"; > + reg = <0x02020000 0x1000>; > + }; > + > Optional: > - firmware node, specifying presence and type of secure firmware: > - compatible: only "samsung,secure-firmware" is currently supported > diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts > index 63e34b24b04f..cf4158728108 100644 > --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts > +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts > @@ -28,6 +28,15 @@ > bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; > }; > > + sysram@02020000 { > + status = "disabled"; > + }; > + > + sysram@02025000 { > + compatible = "samsung,exynos4210-sysram"; > + reg = <0x02025000 0x1000>; > + }; > + > mct@10050000 { > compatible = "none"; > }; > diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi > index cacf6140dd2f..a3f4bba099e6 100644 > --- a/arch/arm/boot/dts/exynos4210.dtsi > +++ b/arch/arm/boot/dts/exynos4210.dtsi > @@ -31,6 +31,16 @@ > pinctrl2 = &pinctrl_2; > }; > > + sysram@02020000 { > + compatible = "samsung,exynos4210-sysram"; > + reg = <0x02020000 0x1000>; > + }; > + > + sysram-ns@0203F000 { > + compatible = "samsung,exynos4210-sysram-ns"; > + reg = <0x0203F000 0x1000>; > + }; > + > pd_lcd1: lcd1-power-domain@10023CA0 { > compatible = "samsung,exynos4210-pd"; > reg = <0x10023CA0 0x20>; > diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi > index c4a9306f8529..d57e3120223f 100644 > --- a/arch/arm/boot/dts/exynos4x12.dtsi > +++ b/arch/arm/boot/dts/exynos4x12.dtsi > @@ -37,6 +37,16 @@ > interrupts = <2 2>, <3 2>, <18 2>, <19 2>; > }; > > + sysram@02020000 { > + compatible = "samsung,exynos4210-sysram"; > + reg = <0x02020000 0x1000>; > + }; > + > + sysram-ns@0204F000 { > + compatible = "samsung,exynos4210-sysram-ns"; > + reg = <0x0204F000 0x1000>; > + }; > + > pd_isp: isp-power-domain@10023CA0 { > compatible = "samsung,exynos4210-pd"; > reg = <0x10023CA0 0x20>; > diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi > index 79d0608d6dcc..c03bd09ec37d 100644 > --- a/arch/arm/boot/dts/exynos5.dtsi > +++ b/arch/arm/boot/dts/exynos5.dtsi > @@ -18,6 +18,11 @@ > / { > interrupt-parent = <&gic>; > > + sysram@02020000 { > + compatible = "samsung,exynos4210-sysram"; > + reg = <0x02020000 0x1000>; > + }; > + > chipid@10000000 { > compatible = "samsung,exynos4210-chipid"; > reg = <0x10000000 0x100>; > diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi > index 37423314a028..bae6c3f253f0 100644 > --- a/arch/arm/boot/dts/exynos5250.dtsi > +++ b/arch/arm/boot/dts/exynos5250.dtsi > @@ -72,6 +72,11 @@ > }; > }; > > + sysram-ns@0204F000 { > + compatible = "samsung,exynos4210-sysram-ns"; > + reg = <0x0204F000 0x1000>; > + }; > + > pd_gsc: gsc-power-domain@10044000 { > compatible = "samsung,exynos4210-pd"; > reg = <0x10044000 0x20>; > diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi > index c3a9a66c5767..217376fe1d82 100644 > --- a/arch/arm/boot/dts/exynos5420.dtsi > +++ b/arch/arm/boot/dts/exynos5420.dtsi > @@ -110,6 +110,11 @@ > }; > }; > > + sysram-ns@02073000 { > + compatible = "samsung,exynos4210-sysram-ns"; > + reg = <0x02073000 0x1000>; > + }; > + > clock: clock-controller@10010000 { > compatible = "samsung,exynos5420-clock"; > reg = <0x10010000 0x30000>; > diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c > index b32a907d021d..6a5fe18ec9b1 100644 > --- a/arch/arm/mach-exynos/exynos.c > +++ b/arch/arm/mach-exynos/exynos.c > @@ -114,51 +114,6 @@ static struct map_desc exynos4_iodesc[] __initdata = { > }, > }; > > -static struct map_desc exynos4_iodesc0[] __initdata = { > - { > - .virtual = (unsigned long)S5P_VA_SYSRAM, > - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0), > - .length = SZ_4K, > - .type = MT_DEVICE, > - }, > -}; > - > -static struct map_desc exynos4_iodesc1[] __initdata = { > - { > - .virtual = (unsigned long)S5P_VA_SYSRAM, > - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1), > - .length = SZ_4K, > - .type = MT_DEVICE, > - }, > -}; > - > -static struct map_desc exynos4210_iodesc[] __initdata = { > - { > - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, > - .pfn = __phys_to_pfn(EXYNOS4210_PA_SYSRAM_NS), > - .length = SZ_4K, > - .type = MT_DEVICE, > - }, > -}; > - > -static struct map_desc exynos4x12_iodesc[] __initdata = { > - { > - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, > - .pfn = __phys_to_pfn(EXYNOS4x12_PA_SYSRAM_NS), > - .length = SZ_4K, > - .type = MT_DEVICE, > - }, > -}; > - > -static struct map_desc exynos5250_iodesc[] __initdata = { > - { > - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, > - .pfn = __phys_to_pfn(EXYNOS5250_PA_SYSRAM_NS), > - .length = SZ_4K, > - .type = MT_DEVICE, > - }, > -}; > - > static struct map_desc exynos5_iodesc[] __initdata = { > { > .virtual = (unsigned long)S3C_VA_SYS, > @@ -181,11 +136,6 @@ static struct map_desc exynos5_iodesc[] __initdata = { > .length = SZ_4K, > .type = MT_DEVICE, > }, { > - .virtual = (unsigned long)S5P_VA_SYSRAM, > - .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM), > - .length = SZ_4K, > - .type = MT_DEVICE, > - }, { > .virtual = (unsigned long)S5P_VA_CMU, > .pfn = __phys_to_pfn(EXYNOS5_PA_CMU), > .length = 144 * SZ_1K, > @@ -268,6 +218,44 @@ static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, > return 1; > } > > +struct __sysram_desc { > + char name[32]; > + unsigned long addr; > +}; > + > +static struct __sysram_desc sysram_desc[] __initdata = { > + { > + .name = "samsung,exynos4210-sysram", > + .addr = (unsigned long)S5P_VA_SYSRAM, > + }, { > + .name = "samsung,exynos4210-sysram-ns", > + .addr = (unsigned long)S5P_VA_SYSRAM_NS, > + }, > +}; > + > +static int __init exynos_fdt_map_sysram(unsigned long node, const char *uname, > + int depth, void *data) > +{ > + struct map_desc iodesc; > + __be32 *reg; > + unsigned long len; > + int i; > + > + for (i = 0; i < ARRAY_SIZE(sysram_desc); i++) { > + if (of_flat_dt_is_compatible(node, sysram_desc[i].name)) { > + reg = of_get_flat_dt_prop(node, "reg", &len); > + if (!reg || len != (sizeof(unsigned long) * 2)) > + return -ENODEV; > + iodesc.virtual = sysram_desc[i].addr; > + iodesc.pfn = __phys_to_pfn(be32_to_cpu(reg[0])); > + iodesc.length = be32_to_cpu(reg[1]); > + iodesc.type = MT_DEVICE; > + iotable_init(&iodesc, 1); > + } > + } > + return 0; > +} > + > /* > * exynos_map_io > * > @@ -280,20 +268,6 @@ static void __init exynos_map_io(void) > > if (soc_is_exynos5()) > iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc)); > - > - if (soc_is_exynos4210()) { > - if (samsung_rev() == EXYNOS4210_REV_0) > - iotable_init(exynos4_iodesc0, > - ARRAY_SIZE(exynos4_iodesc0)); > - else > - iotable_init(exynos4_iodesc1, > - ARRAY_SIZE(exynos4_iodesc1)); > - iotable_init(exynos4210_iodesc, ARRAY_SIZE(exynos4210_iodesc)); > - } > - if (soc_is_exynos4212() || soc_is_exynos4412()) > - iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc)); > - if (soc_is_exynos5250()) > - iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc)); > } > > void __init exynos_init_io(void) > @@ -306,6 +280,8 @@ void __init exynos_init_io(void) > s5p_init_cpu(S5P_VA_CHIPID); > > exynos_map_io(); > + > + of_scan_flat_dt(exynos_fdt_map_sysram, NULL); > } > > struct bus_type exynos_subsys = { > diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h > index 7b046b59d9ec..548269a60634 100644 > --- a/arch/arm/mach-exynos/include/mach/map.h > +++ b/arch/arm/mach-exynos/include/mach/map.h > @@ -23,13 +23,6 @@ > > #include <plat/map-s5p.h> > > -#define EXYNOS4_PA_SYSRAM0 0x02025000 > -#define EXYNOS4_PA_SYSRAM1 0x02020000 > -#define EXYNOS5_PA_SYSRAM 0x02020000 > -#define EXYNOS4210_PA_SYSRAM_NS 0x0203F000 > -#define EXYNOS4x12_PA_SYSRAM_NS 0x0204F000 > -#define EXYNOS5250_PA_SYSRAM_NS 0x0204F000 > - > #define EXYNOS_PA_CHIPID 0x10000000 > > #define EXYNOS4_PA_SYSCON 0x10010000 > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Apr 16, 2014 at 6:50 AM, Sachin Kamat <sachin.kamat@linaro.org> wrote: > Instead of hardcoding the SYSRAM details for each SoC, > pass this information through device tree (DT) and make > the code SoC agnostic. > > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > --- > Rebased on latest linux-next. > --- > .../devicetree/bindings/arm/samsung-boards.txt | 11 +++ > arch/arm/boot/dts/exynos4210-universal_c210.dts | 9 ++ > arch/arm/boot/dts/exynos4210.dtsi | 10 ++ > arch/arm/boot/dts/exynos4x12.dtsi | 10 ++ > arch/arm/boot/dts/exynos5.dtsi | 5 + > arch/arm/boot/dts/exynos5250.dtsi | 5 + > arch/arm/boot/dts/exynos5420.dtsi | 5 + > arch/arm/mach-exynos/exynos.c | 104 ++++++++------------ > arch/arm/mach-exynos/include/mach/map.h | 7 -- > 9 files changed, 95 insertions(+), 71 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung-boards.txt > index 2168ed31e1b0..f79710eb7e79 100644 > --- a/Documentation/devicetree/bindings/arm/samsung-boards.txt > +++ b/Documentation/devicetree/bindings/arm/samsung-boards.txt > @@ -7,6 +7,17 @@ Required root node properties: > (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board. > (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC. > > + - sysram node, specifying the type (secure or non-secure) of SYSRAM > + - compatible: following types are supported > + "samsung,exynos4210-sysram" : Secure SYSRAM > + "samsung,exynos4210-sysram-ns" : Non-secure SYSRAM Base this on mmio-sram binding please. > + - reg: address of SYSRAM bank > + > + sysram@02020000 { > + compatible = "samsung,exynos4210-sysram"; > + reg = <0x02020000 0x1000>; > + }; > + > Optional: > - firmware node, specifying presence and type of secure firmware: > - compatible: only "samsung,secure-firmware" is currently supported > diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts > index 63e34b24b04f..cf4158728108 100644 > --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts > +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts > @@ -28,6 +28,15 @@ > bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; > }; > > + sysram@02020000 { > + status = "disabled"; > + }; > + > + sysram@02025000 { > + compatible = "samsung,exynos4210-sysram"; > + reg = <0x02025000 0x1000>; > + }; > + > mct@10050000 { > compatible = "none"; > }; > diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi > index cacf6140dd2f..a3f4bba099e6 100644 > --- a/arch/arm/boot/dts/exynos4210.dtsi > +++ b/arch/arm/boot/dts/exynos4210.dtsi > @@ -31,6 +31,16 @@ > pinctrl2 = &pinctrl_2; > }; > > + sysram@02020000 { > + compatible = "samsung,exynos4210-sysram"; > + reg = <0x02020000 0x1000>; > + }; > + > + sysram-ns@0203F000 { > + compatible = "samsung,exynos4210-sysram-ns"; > + reg = <0x0203F000 0x1000>; hex should be lower case. [...] > @@ -268,6 +218,44 @@ static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, > return 1; > } > > +struct __sysram_desc { > + char name[32]; > + unsigned long addr; > +}; > + > +static struct __sysram_desc sysram_desc[] __initdata = { > + { > + .name = "samsung,exynos4210-sysram", > + .addr = (unsigned long)S5P_VA_SYSRAM, > + }, { > + .name = "samsung,exynos4210-sysram-ns", > + .addr = (unsigned long)S5P_VA_SYSRAM_NS, > + }, > +}; > + > +static int __init exynos_fdt_map_sysram(unsigned long node, const char *uname, > + int depth, void *data) > +{ > + struct map_desc iodesc; > + __be32 *reg; > + unsigned long len; > + int i; > + > + for (i = 0; i < ARRAY_SIZE(sysram_desc); i++) { > + if (of_flat_dt_is_compatible(node, sysram_desc[i].name)) { > + reg = of_get_flat_dt_prop(node, "reg", &len); > + if (!reg || len != (sizeof(unsigned long) * 2)) > + return -ENODEV; > + iodesc.virtual = sysram_desc[i].addr; > + iodesc.pfn = __phys_to_pfn(be32_to_cpu(reg[0])); > + iodesc.length = be32_to_cpu(reg[1]); > + iodesc.type = MT_DEVICE; > + iotable_init(&iodesc, 1); I don't think this needs to be a static mapping at all. Fix your SMP code. Move the code setting the boot address in prepare_cpus to boot_secondary. Also, the pen code is all unnecessary if you can properly reset a core on hotplug. Given this code: if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) { __raw_writel(S5P_CORE_LOCAL_PWR_EN, S5P_ARM_CORE1_CONFIGURATION); and: /* make cpu1 to be turned off at next WFI command */ if (cpu == 1) __raw_writel(0, S5P_ARM_CORE1_CONFIGURATION); It would appear you probably have this capability and the exynos smp code is pure mindless cut n' paste. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, Am Mittwoch, 16. April 2014, 16:35:36 schrieb Arnd Bergmann: > On Wednesday 16 April 2014 17:20:51 Sachin Kamat wrote: > > Instead of hardcoding the SYSRAM details for each SoC, > > pass this information through device tree (DT) and make > > the code SoC agnostic. > > > > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > > --- > > Rebased on latest linux-next. > > Thanks for sending this again. I'd like Heiko to have a look > and provide an Ack if he's happy with it. > > It seems similar to what he did with the SRAM for mach-rockchip, > and if it is we should use the same binding that he introduced, > which would be a minor variation of this. The sram binding is derived from the generic reserved-memory bindings to enable the sram in general to be used generically through the sram driver, while still retaining some areas for special purposes, like the smp-trampoline in my case. From my reading of platsmp.c, it looks like offset+0x4 starts the so called boot-registesr, which get the smp-start-address written to. So I guess it all depends on what is contained in the rest of the sysram. If it is all covered with such special registers or other special uses, the code below is fine. But if the most of the area is just general purpose sram, a solution like on rockchip might be nicer - i.e. handling the sysram via the sram driver and declaring a reserved section for the boot registers. So, depending on the above: Acked-by: Heiko Stuebner <heiko@sntech.de> Heiko > > Arnd > > > .../devicetree/bindings/arm/samsung-boards.txt | 11 +++ > > arch/arm/boot/dts/exynos4210-universal_c210.dts | 9 ++ > > arch/arm/boot/dts/exynos4210.dtsi | 10 ++ > > arch/arm/boot/dts/exynos4x12.dtsi | 10 ++ > > arch/arm/boot/dts/exynos5.dtsi | 5 + > > arch/arm/boot/dts/exynos5250.dtsi | 5 + > > arch/arm/boot/dts/exynos5420.dtsi | 5 + > > arch/arm/mach-exynos/exynos.c | 104 > > ++++++++------------ arch/arm/mach-exynos/include/mach/map.h > > | 7 -- > > 9 files changed, 95 insertions(+), 71 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/arm/samsung-boards.txt > > b/Documentation/devicetree/bindings/arm/samsung-boards.txt index > > 2168ed31e1b0..f79710eb7e79 100644 > > --- a/Documentation/devicetree/bindings/arm/samsung-boards.txt > > +++ b/Documentation/devicetree/bindings/arm/samsung-boards.txt > > > > @@ -7,6 +7,17 @@ Required root node properties: > > (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board. > > (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC. > > > > + - sysram node, specifying the type (secure or non-secure) of SYSRAM > > + - compatible: following types are supported > > + "samsung,exynos4210-sysram" : Secure SYSRAM > > + "samsung,exynos4210-sysram-ns" : Non-secure SYSRAM > > + - reg: address of SYSRAM bank > > + > > + sysram@02020000 { > > + compatible = "samsung,exynos4210-sysram"; > > + reg = <0x02020000 0x1000>; > > + }; > > + > > > > Optional: > > - firmware node, specifying presence and type of secure firmware: > > - compatible: only "samsung,secure-firmware" is currently > > supported > > > > diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts > > b/arch/arm/boot/dts/exynos4210-universal_c210.dts index > > 63e34b24b04f..cf4158728108 100644 > > --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts > > +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts > > @@ -28,6 +28,15 @@ > > > > bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait > > earlyprintk panic=5 maxcpus=1";> > > }; > > > > + sysram@02020000 { > > + status = "disabled"; > > + }; > > + > > + sysram@02025000 { > > + compatible = "samsung,exynos4210-sysram"; > > + reg = <0x02025000 0x1000>; > > + }; > > + > > > > mct@10050000 { > > > > compatible = "none"; > > > > }; > > > > diff --git a/arch/arm/boot/dts/exynos4210.dtsi > > b/arch/arm/boot/dts/exynos4210.dtsi index cacf6140dd2f..a3f4bba099e6 > > 100644 > > --- a/arch/arm/boot/dts/exynos4210.dtsi > > +++ b/arch/arm/boot/dts/exynos4210.dtsi > > @@ -31,6 +31,16 @@ > > > > pinctrl2 = &pinctrl_2; > > > > }; > > > > + sysram@02020000 { > > + compatible = "samsung,exynos4210-sysram"; > > + reg = <0x02020000 0x1000>; > > + }; > > + > > + sysram-ns@0203F000 { > > + compatible = "samsung,exynos4210-sysram-ns"; > > + reg = <0x0203F000 0x1000>; > > + }; > > + > > > > pd_lcd1: lcd1-power-domain@10023CA0 { > > > > compatible = "samsung,exynos4210-pd"; > > reg = <0x10023CA0 0x20>; > > > > diff --git a/arch/arm/boot/dts/exynos4x12.dtsi > > b/arch/arm/boot/dts/exynos4x12.dtsi index c4a9306f8529..d57e3120223f > > 100644 > > --- a/arch/arm/boot/dts/exynos4x12.dtsi > > +++ b/arch/arm/boot/dts/exynos4x12.dtsi > > @@ -37,6 +37,16 @@ > > > > interrupts = <2 2>, <3 2>, <18 2>, <19 2>; > > > > }; > > > > + sysram@02020000 { > > + compatible = "samsung,exynos4210-sysram"; > > + reg = <0x02020000 0x1000>; > > + }; > > + > > + sysram-ns@0204F000 { > > + compatible = "samsung,exynos4210-sysram-ns"; > > + reg = <0x0204F000 0x1000>; > > + }; > > + > > > > pd_isp: isp-power-domain@10023CA0 { > > > > compatible = "samsung,exynos4210-pd"; > > reg = <0x10023CA0 0x20>; > > > > diff --git a/arch/arm/boot/dts/exynos5.dtsi > > b/arch/arm/boot/dts/exynos5.dtsi index 79d0608d6dcc..c03bd09ec37d 100644 > > --- a/arch/arm/boot/dts/exynos5.dtsi > > +++ b/arch/arm/boot/dts/exynos5.dtsi > > @@ -18,6 +18,11 @@ > > > > / { > > > > interrupt-parent = <&gic>; > > > > + sysram@02020000 { > > + compatible = "samsung,exynos4210-sysram"; > > + reg = <0x02020000 0x1000>; > > + }; > > + > > > > chipid@10000000 { > > > > compatible = "samsung,exynos4210-chipid"; > > reg = <0x10000000 0x100>; > > > > diff --git a/arch/arm/boot/dts/exynos5250.dtsi > > b/arch/arm/boot/dts/exynos5250.dtsi index 37423314a028..bae6c3f253f0 > > 100644 > > --- a/arch/arm/boot/dts/exynos5250.dtsi > > +++ b/arch/arm/boot/dts/exynos5250.dtsi > > @@ -72,6 +72,11 @@ > > > > }; > > > > }; > > > > + sysram-ns@0204F000 { > > + compatible = "samsung,exynos4210-sysram-ns"; > > + reg = <0x0204F000 0x1000>; > > + }; > > + > > > > pd_gsc: gsc-power-domain@10044000 { > > > > compatible = "samsung,exynos4210-pd"; > > reg = <0x10044000 0x20>; > > > > diff --git a/arch/arm/boot/dts/exynos5420.dtsi > > b/arch/arm/boot/dts/exynos5420.dtsi index c3a9a66c5767..217376fe1d82 > > 100644 > > --- a/arch/arm/boot/dts/exynos5420.dtsi > > +++ b/arch/arm/boot/dts/exynos5420.dtsi > > @@ -110,6 +110,11 @@ > > > > }; > > > > }; > > > > + sysram-ns@02073000 { > > + compatible = "samsung,exynos4210-sysram-ns"; > > + reg = <0x02073000 0x1000>; > > + }; > > + > > > > clock: clock-controller@10010000 { > > > > compatible = "samsung,exynos5420-clock"; > > reg = <0x10010000 0x30000>; > > > > diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c > > index b32a907d021d..6a5fe18ec9b1 100644 > > --- a/arch/arm/mach-exynos/exynos.c > > +++ b/arch/arm/mach-exynos/exynos.c > > @@ -114,51 +114,6 @@ static struct map_desc exynos4_iodesc[] __initdata = > > { > > > > }, > > > > }; > > > > -static struct map_desc exynos4_iodesc0[] __initdata = { > > - { > > - .virtual = (unsigned long)S5P_VA_SYSRAM, > > - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0), > > - .length = SZ_4K, > > - .type = MT_DEVICE, > > - }, > > -}; > > - > > -static struct map_desc exynos4_iodesc1[] __initdata = { > > - { > > - .virtual = (unsigned long)S5P_VA_SYSRAM, > > - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1), > > - .length = SZ_4K, > > - .type = MT_DEVICE, > > - }, > > -}; > > - > > -static struct map_desc exynos4210_iodesc[] __initdata = { > > - { > > - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, > > - .pfn = __phys_to_pfn(EXYNOS4210_PA_SYSRAM_NS), > > - .length = SZ_4K, > > - .type = MT_DEVICE, > > - }, > > -}; > > - > > -static struct map_desc exynos4x12_iodesc[] __initdata = { > > - { > > - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, > > - .pfn = __phys_to_pfn(EXYNOS4x12_PA_SYSRAM_NS), > > - .length = SZ_4K, > > - .type = MT_DEVICE, > > - }, > > -}; > > - > > -static struct map_desc exynos5250_iodesc[] __initdata = { > > - { > > - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, > > - .pfn = __phys_to_pfn(EXYNOS5250_PA_SYSRAM_NS), > > - .length = SZ_4K, > > - .type = MT_DEVICE, > > - }, > > -}; > > - > > > > static struct map_desc exynos5_iodesc[] __initdata = { > > > > { > > > > .virtual = (unsigned long)S3C_VA_SYS, > > > > @@ -181,11 +136,6 @@ static struct map_desc exynos5_iodesc[] __initdata = > > { > > > > .length = SZ_4K, > > .type = MT_DEVICE, > > > > }, { > > > > - .virtual = (unsigned long)S5P_VA_SYSRAM, > > - .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM), > > - .length = SZ_4K, > > - .type = MT_DEVICE, > > - }, { > > > > .virtual = (unsigned long)S5P_VA_CMU, > > .pfn = __phys_to_pfn(EXYNOS5_PA_CMU), > > .length = 144 * SZ_1K, > > > > @@ -268,6 +218,44 @@ static int __init exynos_fdt_map_chipid(unsigned long > > node, const char *uname,> > > return 1; > > > > } > > > > +struct __sysram_desc { > > + char name[32]; > > + unsigned long addr; > > +}; > > + > > +static struct __sysram_desc sysram_desc[] __initdata = { > > + { > > + .name = "samsung,exynos4210-sysram", > > + .addr = (unsigned long)S5P_VA_SYSRAM, > > + }, { > > + .name = "samsung,exynos4210-sysram-ns", > > + .addr = (unsigned long)S5P_VA_SYSRAM_NS, > > + }, > > +}; > > + > > +static int __init exynos_fdt_map_sysram(unsigned long node, const char > > *uname, + int depth, void *data) > > +{ > > + struct map_desc iodesc; > > + __be32 *reg; > > + unsigned long len; > > + int i; > > + > > + for (i = 0; i < ARRAY_SIZE(sysram_desc); i++) { > > + if (of_flat_dt_is_compatible(node, sysram_desc[i].name)) { > > + reg = of_get_flat_dt_prop(node, "reg", &len); > > + if (!reg || len != (sizeof(unsigned long) * 2)) > > + return -ENODEV; > > + iodesc.virtual = sysram_desc[i].addr; > > + iodesc.pfn = __phys_to_pfn(be32_to_cpu(reg[0])); > > + iodesc.length = be32_to_cpu(reg[1]); > > + iodesc.type = MT_DEVICE; > > + iotable_init(&iodesc, 1); > > + } > > + } > > + return 0; > > +} > > + > > > > /* > > > > * exynos_map_io > > * > > > > @@ -280,20 +268,6 @@ static void __init exynos_map_io(void) > > > > if (soc_is_exynos5()) > > > > iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc)); > > > > - > > - if (soc_is_exynos4210()) { > > - if (samsung_rev() == EXYNOS4210_REV_0) > > - iotable_init(exynos4_iodesc0, > > - ARRAY_SIZE(exynos4_iodesc0)); > > - else > > - iotable_init(exynos4_iodesc1, > > - ARRAY_SIZE(exynos4_iodesc1)); > > - iotable_init(exynos4210_iodesc, ARRAY_SIZE(exynos4210_iodesc)); > > - } > > - if (soc_is_exynos4212() || soc_is_exynos4412()) > > - iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc)); > > - if (soc_is_exynos5250()) > > - iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc)); > > > > } > > > > void __init exynos_init_io(void) > > > > @@ -306,6 +280,8 @@ void __init exynos_init_io(void) > > > > s5p_init_cpu(S5P_VA_CHIPID); > > > > exynos_map_io(); > > > > + > > + of_scan_flat_dt(exynos_fdt_map_sysram, NULL); > > > > } > > > > struct bus_type exynos_subsys = { > > > > diff --git a/arch/arm/mach-exynos/include/mach/map.h > > b/arch/arm/mach-exynos/include/mach/map.h index > > 7b046b59d9ec..548269a60634 100644 > > --- a/arch/arm/mach-exynos/include/mach/map.h > > +++ b/arch/arm/mach-exynos/include/mach/map.h > > @@ -23,13 +23,6 @@ > > > > #include <plat/map-s5p.h> > > > > -#define EXYNOS4_PA_SYSRAM0 0x02025000 > > -#define EXYNOS4_PA_SYSRAM1 0x02020000 > > -#define EXYNOS5_PA_SYSRAM 0x02020000 > > -#define EXYNOS4210_PA_SYSRAM_NS 0x0203F000 > > -#define EXYNOS4x12_PA_SYSRAM_NS 0x0204F000 > > -#define EXYNOS5250_PA_SYSRAM_NS 0x0204F000 > > - > > > > #define EXYNOS_PA_CHIPID 0x10000000 > > > > #define EXYNOS4_PA_SYSCON 0x10010000 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Rob Herring wrote: > > On Wed, Apr 16, 2014 at 6:50 AM, Sachin Kamat <sachin.kamat@linaro.org> > wrote: > > Instead of hardcoding the SYSRAM details for each SoC, > > pass this information through device tree (DT) and make > > the code SoC agnostic. > > > > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > > --- > > Rebased on latest linux-next. > > --- > > .../devicetree/bindings/arm/samsung-boards.txt | 11 +++ > > arch/arm/boot/dts/exynos4210-universal_c210.dts | 9 ++ > > arch/arm/boot/dts/exynos4210.dtsi | 10 ++ > > arch/arm/boot/dts/exynos4x12.dtsi | 10 ++ > > arch/arm/boot/dts/exynos5.dtsi | 5 + > > arch/arm/boot/dts/exynos5250.dtsi | 5 + > > arch/arm/boot/dts/exynos5420.dtsi | 5 + > > arch/arm/mach-exynos/exynos.c | 104 ++++++++----------- > - > > arch/arm/mach-exynos/include/mach/map.h | 7 -- > > 9 files changed, 95 insertions(+), 71 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/arm/samsung-boards.txt > b/Documentation/devicetree/bindings/arm/samsung-boards.txt > > index 2168ed31e1b0..f79710eb7e79 100644 > > --- a/Documentation/devicetree/bindings/arm/samsung-boards.txt > > +++ b/Documentation/devicetree/bindings/arm/samsung-boards.txt > > @@ -7,6 +7,17 @@ Required root node properties: > > (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board. > > (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC. > > > > + - sysram node, specifying the type (secure or non-secure) of SYSRAM > > + - compatible: following types are supported > > + "samsung,exynos4210-sysram" : Secure SYSRAM > > + "samsung,exynos4210-sysram-ns" : Non-secure SYSRAM > > Base this on mmio-sram binding please. > > > + - reg: address of SYSRAM bank > > + > > + sysram@02020000 { > > + compatible = "samsung,exynos4210-sysram"; > > + reg = <0x02020000 0x1000>; > > + }; > > + > > Optional: > > - firmware node, specifying presence and type of secure firmware: > > - compatible: only "samsung,secure-firmware" is currently > supported > > diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts > b/arch/arm/boot/dts/exynos4210-universal_c210.dts > > index 63e34b24b04f..cf4158728108 100644 > > --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts > > +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts > > @@ -28,6 +28,15 @@ > > bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw > rootwait earlyprintk panic=5 maxcpus=1"; > > }; > > > > + sysram@02020000 { > > + status = "disabled"; > > + }; > > + > > + sysram@02025000 { > > + compatible = "samsung,exynos4210-sysram"; > > + reg = <0x02025000 0x1000>; > > + }; > > + > > mct@10050000 { > > compatible = "none"; > > }; > > diff --git a/arch/arm/boot/dts/exynos4210.dtsi > b/arch/arm/boot/dts/exynos4210.dtsi > > index cacf6140dd2f..a3f4bba099e6 100644 > > --- a/arch/arm/boot/dts/exynos4210.dtsi > > +++ b/arch/arm/boot/dts/exynos4210.dtsi > > @@ -31,6 +31,16 @@ > > pinctrl2 = &pinctrl_2; > > }; > > > > + sysram@02020000 { > > + compatible = "samsung,exynos4210-sysram"; > > + reg = <0x02020000 0x1000>; > > + }; > > + > > + sysram-ns@0203F000 { > > + compatible = "samsung,exynos4210-sysram-ns"; > > + reg = <0x0203F000 0x1000>; > > hex should be lower case. > > > [...] > > > @@ -268,6 +218,44 @@ static int __init exynos_fdt_map_chipid(unsigned > long node, const char *uname, > > return 1; > > } > > > > +struct __sysram_desc { > > + char name[32]; > > + unsigned long addr; > > +}; > > + > > +static struct __sysram_desc sysram_desc[] __initdata = { > > + { > > + .name = "samsung,exynos4210-sysram", > > + .addr = (unsigned long)S5P_VA_SYSRAM, > > + }, { > > + .name = "samsung,exynos4210-sysram-ns", > > + .addr = (unsigned long)S5P_VA_SYSRAM_NS, > > + }, > > +}; > > + > > +static int __init exynos_fdt_map_sysram(unsigned long node, const char > *uname, > > + int depth, void *data) > > +{ > > + struct map_desc iodesc; > > + __be32 *reg; > > + unsigned long len; > > + int i; > > + > > + for (i = 0; i < ARRAY_SIZE(sysram_desc); i++) { > > + if (of_flat_dt_is_compatible(node, sysram_desc[i].name)) { > > + reg = of_get_flat_dt_prop(node, "reg", &len); > > + if (!reg || len != (sizeof(unsigned long) * 2)) > > + return -ENODEV; > > + iodesc.virtual = sysram_desc[i].addr; > > + iodesc.pfn = __phys_to_pfn(be32_to_cpu(reg[0])); > > + iodesc.length = be32_to_cpu(reg[1]); > > + iodesc.type = MT_DEVICE; > > + iotable_init(&iodesc, 1); > > I don't think this needs to be a static mapping at all. Fix your SMP > code. Move the code setting the boot address in prepare_cpus to > boot_secondary. > > Also, the pen code is all unnecessary if you can properly reset a core > on hotplug. Given this code: > > if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) { > __raw_writel(S5P_CORE_LOCAL_PWR_EN, > S5P_ARM_CORE1_CONFIGURATION); > > and: > > /* make cpu1 to be turned off at next WFI command */ > if (cpu == 1) > __raw_writel(0, S5P_ARM_CORE1_CONFIGURATION); > > It would appear you probably have this capability and the exynos smp > code is pure mindless cut n' paste. > Basically, I have no strong objection on Rob's suggestion but I'd like to pick this one after small addressing because of other patches' dependency. Then how about addressing comments? - Kukjin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Heiko, On 16 April 2014 22:55, Heiko Stübner <heiko@sntech.de> wrote: > Hi, > > Am Mittwoch, 16. April 2014, 16:35:36 schrieb Arnd Bergmann: >> On Wednesday 16 April 2014 17:20:51 Sachin Kamat wrote: >> > Instead of hardcoding the SYSRAM details for each SoC, >> > pass this information through device tree (DT) and make >> > the code SoC agnostic. >> > >> > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> >> > --- >> > Rebased on latest linux-next. >> >> Thanks for sending this again. I'd like Heiko to have a look >> and provide an Ack if he's happy with it. >> >> It seems similar to what he did with the SRAM for mach-rockchip, >> and if it is we should use the same binding that he introduced, >> which would be a minor variation of this. > > The sram binding is derived from the generic reserved-memory bindings to > enable the sram in general to be used generically through the sram driver, > while still retaining some areas for special purposes, like the smp-trampoline > in my case. > > From my reading of platsmp.c, it looks like offset+0x4 starts the so called > boot-registesr, which get the smp-start-address written to. > > So I guess it all depends on what is contained in the rest of the sysram. If > it is all covered with such special registers or other special uses, the code > below is fine. But if the most of the area is just general purpose sram, a > solution like on rockchip might be nicer - i.e. handling the sysram via the > sram driver and declaring a reserved section for the boot registers. Thanks for your inputs. In our case, we use sram for secondary boot addresses but could not find any other general purpose use. > So, depending on the above: > Acked-by: Heiko Stuebner <heiko@sntech.de> So I believe your ack applies to our case :). Thanks again.
On Wednesday 30 April 2014 09:39:54 Sachin Kamat wrote: > On 16 April 2014 22:55, Heiko Stübner <heiko@sntech.de> wrote: > > Am Mittwoch, 16. April 2014, 16:35:36 schrieb Arnd Bergmann: > >> On Wednesday 16 April 2014 17:20:51 Sachin Kamat wrote: > >> > Instead of hardcoding the SYSRAM details for each SoC, > >> > pass this information through device tree (DT) and make > >> > the code SoC agnostic. > >> > > >> > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > >> > --- > >> > Rebased on latest linux-next. > >> > >> Thanks for sending this again. I'd like Heiko to have a look > >> and provide an Ack if he's happy with it. > >> > >> It seems similar to what he did with the SRAM for mach-rockchip, > >> and if it is we should use the same binding that he introduced, > >> which would be a minor variation of this. > > > > The sram binding is derived from the generic reserved-memory bindings to > > enable the sram in general to be used generically through the sram driver, > > while still retaining some areas for special purposes, like the smp-trampoline > > in my case. > > > > From my reading of platsmp.c, it looks like offset+0x4 starts the so called > > boot-registesr, which get the smp-start-address written to. > > > > So I guess it all depends on what is contained in the rest of the sysram. If > > it is all covered with such special registers or other special uses, the code > > below is fine. But if the most of the area is just general purpose sram, a > > solution like on rockchip might be nicer - i.e. handling the sysram via the > > sram driver and declaring a reserved section for the boot registers. > > Thanks for your inputs. In our case, we use sram for secondary boot > addresses but could not find any other general purpose use. > > > So, depending on the above: > > Acked-by: Heiko Stuebner <heiko@sntech.de> > > So I believe your ack applies to our case :). Thanks again. My interpretation is the opposite. :) For what I can tell, you use only part of the SRAM for this, and the rest could be used for something else, you just haven't had the need for it. If this is the case, you really should be using Heiko's binding instead, to make it future-proof in case some other use for the SRAM comes up. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/arm/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung-boards.txt index 2168ed31e1b0..f79710eb7e79 100644 --- a/Documentation/devicetree/bindings/arm/samsung-boards.txt +++ b/Documentation/devicetree/bindings/arm/samsung-boards.txt @@ -7,6 +7,17 @@ Required root node properties: (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board. (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC. + - sysram node, specifying the type (secure or non-secure) of SYSRAM + - compatible: following types are supported + "samsung,exynos4210-sysram" : Secure SYSRAM + "samsung,exynos4210-sysram-ns" : Non-secure SYSRAM + - reg: address of SYSRAM bank + + sysram@02020000 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x02020000 0x1000>; + }; + Optional: - firmware node, specifying presence and type of secure firmware: - compatible: only "samsung,secure-firmware" is currently supported diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 63e34b24b04f..cf4158728108 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -28,6 +28,15 @@ bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; }; + sysram@02020000 { + status = "disabled"; + }; + + sysram@02025000 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x02025000 0x1000>; + }; + mct@10050000 { compatible = "none"; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index cacf6140dd2f..a3f4bba099e6 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -31,6 +31,16 @@ pinctrl2 = &pinctrl_2; }; + sysram@02020000 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x02020000 0x1000>; + }; + + sysram-ns@0203F000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x0203F000 0x1000>; + }; + pd_lcd1: lcd1-power-domain@10023CA0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index c4a9306f8529..d57e3120223f 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -37,6 +37,16 @@ interrupts = <2 2>, <3 2>, <18 2>, <19 2>; }; + sysram@02020000 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x02020000 0x1000>; + }; + + sysram-ns@0204F000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x0204F000 0x1000>; + }; + pd_isp: isp-power-domain@10023CA0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 79d0608d6dcc..c03bd09ec37d 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -18,6 +18,11 @@ / { interrupt-parent = <&gic>; + sysram@02020000 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x02020000 0x1000>; + }; + chipid@10000000 { compatible = "samsung,exynos4210-chipid"; reg = <0x10000000 0x100>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 37423314a028..bae6c3f253f0 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -72,6 +72,11 @@ }; }; + sysram-ns@0204F000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x0204F000 0x1000>; + }; + pd_gsc: gsc-power-domain@10044000 { compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index c3a9a66c5767..217376fe1d82 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -110,6 +110,11 @@ }; }; + sysram-ns@02073000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x02073000 0x1000>; + }; + clock: clock-controller@10010000 { compatible = "samsung,exynos5420-clock"; reg = <0x10010000 0x30000>; diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index b32a907d021d..6a5fe18ec9b1 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -114,51 +114,6 @@ static struct map_desc exynos4_iodesc[] __initdata = { }, }; -static struct map_desc exynos4_iodesc0[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4_iodesc1[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4210_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, - .pfn = __phys_to_pfn(EXYNOS4210_PA_SYSRAM_NS), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4x12_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, - .pfn = __phys_to_pfn(EXYNOS4x12_PA_SYSRAM_NS), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos5250_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, - .pfn = __phys_to_pfn(EXYNOS5250_PA_SYSRAM_NS), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - static struct map_desc exynos5_iodesc[] __initdata = { { .virtual = (unsigned long)S3C_VA_SYS, @@ -181,11 +136,6 @@ static struct map_desc exynos5_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S5P_VA_CMU, .pfn = __phys_to_pfn(EXYNOS5_PA_CMU), .length = 144 * SZ_1K, @@ -268,6 +218,44 @@ static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, return 1; } +struct __sysram_desc { + char name[32]; + unsigned long addr; +}; + +static struct __sysram_desc sysram_desc[] __initdata = { + { + .name = "samsung,exynos4210-sysram", + .addr = (unsigned long)S5P_VA_SYSRAM, + }, { + .name = "samsung,exynos4210-sysram-ns", + .addr = (unsigned long)S5P_VA_SYSRAM_NS, + }, +}; + +static int __init exynos_fdt_map_sysram(unsigned long node, const char *uname, + int depth, void *data) +{ + struct map_desc iodesc; + __be32 *reg; + unsigned long len; + int i; + + for (i = 0; i < ARRAY_SIZE(sysram_desc); i++) { + if (of_flat_dt_is_compatible(node, sysram_desc[i].name)) { + reg = of_get_flat_dt_prop(node, "reg", &len); + if (!reg || len != (sizeof(unsigned long) * 2)) + return -ENODEV; + iodesc.virtual = sysram_desc[i].addr; + iodesc.pfn = __phys_to_pfn(be32_to_cpu(reg[0])); + iodesc.length = be32_to_cpu(reg[1]); + iodesc.type = MT_DEVICE; + iotable_init(&iodesc, 1); + } + } + return 0; +} + /* * exynos_map_io * @@ -280,20 +268,6 @@ static void __init exynos_map_io(void) if (soc_is_exynos5()) iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc)); - - if (soc_is_exynos4210()) { - if (samsung_rev() == EXYNOS4210_REV_0) - iotable_init(exynos4_iodesc0, - ARRAY_SIZE(exynos4_iodesc0)); - else - iotable_init(exynos4_iodesc1, - ARRAY_SIZE(exynos4_iodesc1)); - iotable_init(exynos4210_iodesc, ARRAY_SIZE(exynos4210_iodesc)); - } - if (soc_is_exynos4212() || soc_is_exynos4412()) - iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc)); - if (soc_is_exynos5250()) - iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc)); } void __init exynos_init_io(void) @@ -306,6 +280,8 @@ void __init exynos_init_io(void) s5p_init_cpu(S5P_VA_CHIPID); exynos_map_io(); + + of_scan_flat_dt(exynos_fdt_map_sysram, NULL); } struct bus_type exynos_subsys = { diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 7b046b59d9ec..548269a60634 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -23,13 +23,6 @@ #include <plat/map-s5p.h> -#define EXYNOS4_PA_SYSRAM0 0x02025000 -#define EXYNOS4_PA_SYSRAM1 0x02020000 -#define EXYNOS5_PA_SYSRAM 0x02020000 -#define EXYNOS4210_PA_SYSRAM_NS 0x0203F000 -#define EXYNOS4x12_PA_SYSRAM_NS 0x0204F000 -#define EXYNOS5250_PA_SYSRAM_NS 0x0204F000 - #define EXYNOS_PA_CHIPID 0x10000000 #define EXYNOS4_PA_SYSCON 0x10010000
Instead of hardcoding the SYSRAM details for each SoC, pass this information through device tree (DT) and make the code SoC agnostic. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> --- Rebased on latest linux-next. --- .../devicetree/bindings/arm/samsung-boards.txt | 11 +++ arch/arm/boot/dts/exynos4210-universal_c210.dts | 9 ++ arch/arm/boot/dts/exynos4210.dtsi | 10 ++ arch/arm/boot/dts/exynos4x12.dtsi | 10 ++ arch/arm/boot/dts/exynos5.dtsi | 5 + arch/arm/boot/dts/exynos5250.dtsi | 5 + arch/arm/boot/dts/exynos5420.dtsi | 5 + arch/arm/mach-exynos/exynos.c | 104 ++++++++------------ arch/arm/mach-exynos/include/mach/map.h | 7 -- 9 files changed, 95 insertions(+), 71 deletions(-)