| Message ID | 1398677132-30600-4-git-send-email-gautam.vivek@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, 28 Apr 2014, Vivek Gautam wrote: > Add support to consume phy provided by Generic phy framework. > Keeping the support for older usb-phy intact right now, in order > to prevent any functionality break in absence of relevant > device tree side change for ohci-exynos. > Once we move to new phy in the device nodes for ohci, we can > remove the support for older phys. > > Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> > Cc: Jingoo Han <jg1.han@samsung.com> > Cc: Alan Stern <stern@rowland.harvard.edu> > --- > +static int exynos_ohci_phy_enable(struct device *dev) > { > struct usb_hcd *hcd = dev_get_drvdata(dev); > struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); > + int i; > + int ret = 0; > > - if (exynos_ohci->phy) > - usb_phy_init(exynos_ohci->phy); > + if (exynos_ohci->phy) { > + ret = usb_phy_init(exynos_ohci->phy); > + if (ret) > + return ret; > + } > + > + for (i = 0; ret == 0 && i < PHY_NUMBER; i++) > + if (exynos_ohci->phy_g[i]) > + ret = phy_power_on(exynos_ohci->phy_g[i]); > + if (ret) > + for (i--; i >= 0; i--) > + if (exynos_ohci->phy_g[i]) > + phy_power_off(exynos_ohci->phy_g[i]); Do you want to call usb_phy_shutdown() at this point? > + > + return ret; > } > > -static void exynos_ohci_phy_disable(struct device *dev) > +static int exynos_ohci_phy_disable(struct device *dev) > { > struct usb_hcd *hcd = dev_get_drvdata(dev); > struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); > + int i; > + int ret = 0; > > if (exynos_ohci->phy) > usb_phy_shutdown(exynos_ohci->phy); > + > + for (i = 0; i < PHY_NUMBER; i++) > + if (exynos_ohci->phy_g[i]) > + ret = phy_power_off(exynos_ohci->phy_g[i]); > + > + return ret; > } This return value is practically meaningless. It is the status from the last PHY only; any errors involving the other PHYs have been lost. You may as well make this function return void. > @@ -210,13 +302,18 @@ static int exynos_ohci_resume(struct device *dev) > { > struct usb_hcd *hcd = dev_get_drvdata(dev); > struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); > + int ret; > > clk_prepare_enable(exynos_ohci->clk); > > if (exynos_ohci->otg) > exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self); > > - exynos_ohci_phy_enable(dev); > + ret = exynos_ohci_phy_enable(dev); > + if (ret) { > + dev_err(dev, "Failed to enable USB phy\n"); Do you want to call clk_disable_unprepare() here? > + return ret; > + } > > ohci_resume(hcd, false); Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Mon, Apr 28, 2014 at 9:11 PM, Alan Stern <stern@rowland.harvard.edu> wrote: > On Mon, 28 Apr 2014, Vivek Gautam wrote: > >> Add support to consume phy provided by Generic phy framework. >> Keeping the support for older usb-phy intact right now, in order >> to prevent any functionality break in absence of relevant >> device tree side change for ohci-exynos. >> Once we move to new phy in the device nodes for ohci, we can >> remove the support for older phys. >> >> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> >> Cc: Jingoo Han <jg1.han@samsung.com> >> Cc: Alan Stern <stern@rowland.harvard.edu> >> --- > >> +static int exynos_ohci_phy_enable(struct device *dev) >> { >> struct usb_hcd *hcd = dev_get_drvdata(dev); >> struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); >> + int i; >> + int ret = 0; >> >> - if (exynos_ohci->phy) >> - usb_phy_init(exynos_ohci->phy); >> + if (exynos_ohci->phy) { >> + ret = usb_phy_init(exynos_ohci->phy); >> + if (ret) >> + return ret; >> + } >> + >> + for (i = 0; ret == 0 && i < PHY_NUMBER; i++) >> + if (exynos_ohci->phy_g[i]) >> + ret = phy_power_on(exynos_ohci->phy_g[i]); >> + if (ret) >> + for (i--; i >= 0; i--) >> + if (exynos_ohci->phy_g[i]) >> + phy_power_off(exynos_ohci->phy_g[i]); > > Do you want to call usb_phy_shutdown() at this point? Yes, you are right. We should be calling usb_phy_shutdown() here. But the two phy-provider drivers should never work together, so one of the above PHYs will not exist. Anyways, for code correctness too, we should be doing as you suggested. I will change this. > >> + >> + return ret; >> } >> >> -static void exynos_ohci_phy_disable(struct device *dev) >> +static int exynos_ohci_phy_disable(struct device *dev) >> { >> struct usb_hcd *hcd = dev_get_drvdata(dev); >> struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); >> + int i; >> + int ret = 0; >> >> if (exynos_ohci->phy) >> usb_phy_shutdown(exynos_ohci->phy); >> + >> + for (i = 0; i < PHY_NUMBER; i++) >> + if (exynos_ohci->phy_g[i]) >> + ret = phy_power_off(exynos_ohci->phy_g[i]); >> + >> + return ret; >> } > > This return value is practically meaningless. It is the status from > the last PHY only; any errors involving the other PHYs have been lost. > > You may as well make this function return void. Right, i will make this function return void and remove 'ret' from it. > >> @@ -210,13 +302,18 @@ static int exynos_ohci_resume(struct device *dev) >> { >> struct usb_hcd *hcd = dev_get_drvdata(dev); >> struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); >> + int ret; >> >> clk_prepare_enable(exynos_ohci->clk); >> >> if (exynos_ohci->otg) >> exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self); >> >> - exynos_ohci_phy_enable(dev); >> + ret = exynos_ohci_phy_enable(dev); >> + if (ret) { >> + dev_err(dev, "Failed to enable USB phy\n"); > > Do you want to call clk_disable_unprepare() here? Yes, we should be calling clk_disable_unprepate() here to avoid the warning in the next suspend cycle.
diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt index d967ba1..03b7e43 100644 --- a/Documentation/devicetree/bindings/usb/exynos-usb.txt +++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt @@ -38,6 +38,15 @@ Required properties: - interrupts: interrupt number to the cpu. - clocks: from common clock binding: handle to usb clock. - clock-names: from common clock binding: Shall be "usbhost". + - port: if in the SoC there are OHCI phys, they should be listed here. + One phy per port. Each port should have its 'reg' entry. + - reg: port number on OHCI controller, e.g + On Exynos5250, port 0 is USB2.0 otg phy + port 1 is HSIC phy0 + port 2 is HSIC phy1 + - phys: from the *Generic PHY* bindings specifying phy used by port. + - phy-names: from the *Generic PHY* bindings specifying name of phy + used by the port. Example: usb@12120000 { @@ -47,6 +56,16 @@ Example: clocks = <&clock 285>; clock-names = "usbhost"; + + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2phy 1>; + phy-names = "host"; + status = "disabled"; + }; + }; DWC3 diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index 05f00e3..011ccde 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/phy/phy.h> #include <linux/usb/phy.h> #include <linux/usb/samsung_usb_phy.h> #include <linux/usb.h> @@ -33,28 +34,122 @@ static struct hc_driver __read_mostly exynos_ohci_hc_driver; #define to_exynos_ohci(hcd) (struct exynos_ohci_hcd *)(hcd_to_ohci(hcd)->priv) +#define PHY_NUMBER 3 struct exynos_ohci_hcd { struct clk *clk; struct usb_phy *phy; struct usb_otg *otg; + struct phy *phy_g[PHY_NUMBER]; }; -static void exynos_ohci_phy_enable(struct device *dev) +static int exynos_ohci_get_phy(struct device *dev, + struct exynos_ohci_hcd *exynos_ohci) +{ + struct device_node *child; + struct phy *phy; + int phy_number; + int ret = 0; + + exynos_ohci->phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + if (IS_ERR(exynos_ohci->phy)) { + ret = PTR_ERR(exynos_ohci->phy); + /* This is the case when PHY config is disabled */ + if (ret == -ENXIO || ret == -ENODEV) { + dev_dbg(dev, "Failed to get usb2 phy\n"); + exynos_ohci->phy = NULL; + ret = 0; + } else if (ret == -EPROBE_DEFER) { + goto fail_phy; + } else { + dev_err(dev, "no usb2 phy configured\n"); + goto fail_phy; + } + } else { + exynos_ohci->otg = exynos_ohci->phy->otg; + } + + /* Getting generic phy: + * We are keeping both types of phys as a part of transiting OHCI + * to generic phy framework, so that in absence of supporting dts + * changes the functionality doesn't break. + * Once we move the ohci dt nodes to use new generic phys, + * we can remove support for older PHY in this driver. + */ + for_each_available_child_of_node(dev->of_node, child) { + ret = of_property_read_u32(child, "reg", &phy_number); + if (ret) { + dev_err(dev, "Failed to parse device tree\n"); + of_node_put(child); + goto fail_phy; + } + if (phy_number >= PHY_NUMBER) { + dev_err(dev, "Invalid number of PHYs\n"); + of_node_put(child); + ret = -EINVAL; + goto fail_phy; + } + phy = devm_of_phy_get(dev, child, 0); + of_node_put(child); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + /* This is the case when PHY config is disabled */ + if (ret == -ENOSYS || ret == -ENODEV) { + dev_dbg(dev, "Failed to get usb2 phy\n"); + phy = NULL; + ret = 0; + } else if (ret == -EPROBE_DEFER) { + goto fail_phy; + } else { + dev_err(dev, "no usb2 phy configured\n"); + goto fail_phy; + } + } + exynos_ohci->phy_g[phy_number] = phy; + } + +fail_phy: + return ret; +} + +static int exynos_ohci_phy_enable(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); + int i; + int ret = 0; - if (exynos_ohci->phy) - usb_phy_init(exynos_ohci->phy); + if (exynos_ohci->phy) { + ret = usb_phy_init(exynos_ohci->phy); + if (ret) + return ret; + } + + for (i = 0; ret == 0 && i < PHY_NUMBER; i++) + if (exynos_ohci->phy_g[i]) + ret = phy_power_on(exynos_ohci->phy_g[i]); + if (ret) + for (i--; i >= 0; i--) + if (exynos_ohci->phy_g[i]) + phy_power_off(exynos_ohci->phy_g[i]); + + return ret; } -static void exynos_ohci_phy_disable(struct device *dev) +static int exynos_ohci_phy_disable(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); + int i; + int ret = 0; if (exynos_ohci->phy) usb_phy_shutdown(exynos_ohci->phy); + + for (i = 0; i < PHY_NUMBER; i++) + if (exynos_ohci->phy_g[i]) + ret = phy_power_off(exynos_ohci->phy_g[i]); + + return ret; } static int exynos_ohci_probe(struct platform_device *pdev) @@ -62,7 +157,6 @@ static int exynos_ohci_probe(struct platform_device *pdev) struct exynos_ohci_hcd *exynos_ohci; struct usb_hcd *hcd; struct resource *res; - struct usb_phy *phy; int irq; int err; @@ -88,15 +182,9 @@ static int exynos_ohci_probe(struct platform_device *pdev) "samsung,exynos5440-ohci")) goto skip_phy; - phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); - if (IS_ERR(phy)) { - usb_put_hcd(hcd); - dev_warn(&pdev->dev, "no platform data or transceiver defined\n"); - return -EPROBE_DEFER; - } else { - exynos_ohci->phy = phy; - exynos_ohci->otg = phy->otg; - } + err = exynos_ohci_get_phy(&pdev->dev, exynos_ohci); + if (err) + goto fail_clk; skip_phy: exynos_ohci->clk = devm_clk_get(&pdev->dev, "usbhost"); @@ -139,7 +227,11 @@ skip_phy: platform_set_drvdata(pdev, hcd); - exynos_ohci_phy_enable(&pdev->dev); + err = exynos_ohci_phy_enable(&pdev->dev); + if (err) { + dev_err(&pdev->dev, "Failed to enable USB phy\n"); + goto fail_io; + } err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) { @@ -210,13 +302,18 @@ static int exynos_ohci_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); + int ret; clk_prepare_enable(exynos_ohci->clk); if (exynos_ohci->otg) exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self); - exynos_ohci_phy_enable(dev); + ret = exynos_ohci_phy_enable(dev); + if (ret) { + dev_err(dev, "Failed to enable USB phy\n"); + return ret; + } ohci_resume(hcd, false);
Add support to consume phy provided by Generic phy framework. Keeping the support for older usb-phy intact right now, in order to prevent any functionality break in absence of relevant device tree side change for ohci-exynos. Once we move to new phy in the device nodes for ohci, we can remove the support for older phys. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Alan Stern <stern@rowland.harvard.edu> --- .../devicetree/bindings/usb/exynos-usb.txt | 19 +++ drivers/usb/host/ohci-exynos.c | 129 +++++++++++++++++--- 2 files changed, 132 insertions(+), 16 deletions(-)