diff mbox

[v3,6/8] ARM: dts: exynos4412-odroid-common: disable 'always on' for BUCK8 regulator

Message ID 1405342106-10585-7-git-send-email-m.szyprowski@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Marek Szyprowski July 14, 2014, 12:48 p.m. UTC 
From: Kamil Debski <k.debski@samsung.com>

On Odroid U2/U3 BUCK8 is used for providing power to also to P3V3
source, which is also connected to LAN9730 chip's nRESET signal. To
reset lan chip on system reboot, the BUCK8 output should not be used in
'always on' mode. This change has no impact on X/X2 boards.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
 arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 1 -
 1 file changed, 1 deletion(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index f793f3b8f0b9..ad2cb32a3439 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -297,7 +297,6 @@ 
 					regulator-name = "BUCK8_2.8V";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
 				};
 			};
 		};