[2/2] arm: dts: exynos3250: add device node support for serial2 and serial3

Commit Message

Pankaj Dubey Sept. 27, 2014, 4:58 a.m. UTC

Signed-off-by: Pankaj Dubey <[e-mail]>
---
 arch/arm/boot/dts/exynos3250-pinctrl.dtsi |   21 +++++++++++++++++++++
 arch/arm/boot/dts/exynos3250.dtsi         |   24 ++++++++++++++++++++++++
 2 files changed, 45 insertions(+)

Patch

diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
index 47b92c1..9887bba 100644
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -97,6 +97,27 @@ 
 		samsung,pin-drv = <0>;
 	};
 
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_fctl: uart2-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
 	i2c2_bus: i2c2-bus {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <3>;
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 9de1252..aaeb321 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -41,6 +41,8 @@ 
 		i2c7 = &i2c_7;
 		serial0 = &serial_0;
 		serial1 = &serial_1;
+		serial2 = &serial_2;
+		serial3 = &serial_3;
 	};
 
 	cpus {
@@ -346,6 +348,28 @@ 
 			status = "disabled";
 		};
 
+		serial_2: serial@13820000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13820000 0x100>;
+			interrupts = <0 111 0>;
+			clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_data &uart2_fctl>;
+			status = "disabled";
+		};
+
+		serial_3: serial@13830000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13830000 0x100>;
+			interrupts = <0 112 0>;
+			clocks = <&cmu CLK_UART3>, <&cmu CLK_SCLK_UART3>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart3_data>;
+			status = "disabled";
+		};
+
 		i2c_0: i2c@13860000 {
 			#address-cells = <1>;
 			#size-cells = <0>;