| Message ID | 1416834256-11225-8-git-send-email-amit.daniel@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 24 November 2014 at 14:04, Amit Daniel Kachhap <amit.daniel@samsung.com> wrote: > This patch adds supports for parent power domain. This will ensure > invoking of parent/child power domain on/off in a correct sequence. > In exynos7 SOC's, power domain controllers have parent and child > hierarchy. > > Cc: Kukjin Kim <kgene.kim@samsung.com> > Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> > --- > .../bindings/arm/exynos/power_domain.txt | 2 + > drivers/soc/samsung/pm_domains.c | 43 +++++++++++++++++++- > 2 files changed, 44 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt > index 00ebda1..0160bdc 100644 > --- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt > +++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt > @@ -24,6 +24,7 @@ Optional Properties: > - pclkN, clkN: Pairs of parent of input clock and input clock to the > devices in this power domain. Maximum of 4 pairs (N = 0 to 3) > are supported currently. > +- parents: phandle of parent power domains. > > Node of a device using power domains must have a samsung,power-domain property > defined with a phandle to respective power domain. > @@ -48,6 +49,7 @@ Example: > mfc_pd: power-domain@10044060 { > compatible = "samsung,exynos4210-pd", "samsung,exynos7-pd-mfc"; > reg = <0x10044060 0x20>; > + parents = <&pd_top>; > #power-domain-cells = <0>; > }; This seems like a good and generic approach to describe that a PM domain could have a parent. I would suggest to rename it, such it reflects its a PM domain binding though. So, maybe we can add this as a common DT binding for the generic PM domain instead of having it as Exynos specific? Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Nov 25, 2014 at 1:29 PM, Ulf Hansson <ulf.hansson@linaro.org> wrote: > On 24 November 2014 at 14:04, Amit Daniel Kachhap > <amit.daniel@samsung.com> wrote: >> This patch adds supports for parent power domain. This will ensure >> invoking of parent/child power domain on/off in a correct sequence. >> In exynos7 SOC's, power domain controllers have parent and child >> hierarchy. >> >> Cc: Kukjin Kim <kgene.kim@samsung.com> >> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> >> --- >> .../bindings/arm/exynos/power_domain.txt | 2 + >> drivers/soc/samsung/pm_domains.c | 43 +++++++++++++++++++- >> 2 files changed, 44 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt >> index 00ebda1..0160bdc 100644 >> --- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt >> +++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt >> @@ -24,6 +24,7 @@ Optional Properties: >> - pclkN, clkN: Pairs of parent of input clock and input clock to the >> devices in this power domain. Maximum of 4 pairs (N = 0 to 3) >> are supported currently. >> +- parents: phandle of parent power domains. >> >> Node of a device using power domains must have a samsung,power-domain property >> defined with a phandle to respective power domain. >> @@ -48,6 +49,7 @@ Example: >> mfc_pd: power-domain@10044060 { >> compatible = "samsung,exynos4210-pd", "samsung,exynos7-pd-mfc"; >> reg = <0x10044060 0x20>; >> + parents = <&pd_top>; >> #power-domain-cells = <0>; >> }; > > This seems like a good and generic approach to describe that a PM > domain could have a parent. I would suggest to rename it, such it > reflects its a PM domain binding though. I am not sure if this is generic. I guess PD's represented like below are more generic. PD1 { PD2 { PD3 { }; }; }; > > So, maybe we can add this as a common DT binding for the generic PM > domain instead of having it as Exynos specific? Yes sure. Regards, Amit D > > Kind regards > Uffe > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Nov 25, 2014 at 9:57 AM, amit daniel kachhap <amit.daniel@samsung.com> wrote: >>> diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt >>> index 00ebda1..0160bdc 100644 >>> --- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt >>> +++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt >>> @@ -24,6 +24,7 @@ Optional Properties: >>> - pclkN, clkN: Pairs of parent of input clock and input clock to the >>> devices in this power domain. Maximum of 4 pairs (N = 0 to 3) >>> are supported currently. >>> +- parents: phandle of parent power domains. Why not using just "power-domains = <&pd_top>"? This is consistent with how clocks refer to their parent clocks. >>> Node of a device using power domains must have a samsung,power-domain property >>> defined with a phandle to respective power domain. >>> @@ -48,6 +49,7 @@ Example: >>> mfc_pd: power-domain@10044060 { >>> compatible = "samsung,exynos4210-pd", "samsung,exynos7-pd-mfc"; >>> reg = <0x10044060 0x20>; >>> + parents = <&pd_top>; >>> #power-domain-cells = <0>; >>> }; >> >> This seems like a good and generic approach to describe that a PM >> domain could have a parent. I would suggest to rename it, such it >> reflects its a PM domain binding though. > I am not sure if this is generic. I guess PD's represented like below > are more generic. > PD1 { > PD2 { > PD3 { > }; > }; > }; Such a representation is not always possible. If you have one power-controller for a hierarchy of PM domains, you can use it. If you have multiple power-controllers, the power controller nodes are at the same level in DT, so you'll have to use "power-domains" properties to link them together. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello, On 2014-11-25 10:19, Geert Uytterhoeven wrote: > On Tue, Nov 25, 2014 at 9:57 AM, amit daniel kachhap > <amit.daniel@samsung.com> wrote: >>>> diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt >>>> index 00ebda1..0160bdc 100644 >>>> --- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt >>>> +++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt >>>> @@ -24,6 +24,7 @@ Optional Properties: >>>> - pclkN, clkN: Pairs of parent of input clock and input clock to the >>>> devices in this power domain. Maximum of 4 pairs (N = 0 to 3) >>>> are supported currently. >>>> +- parents: phandle of parent power domains. > Why not using just "power-domains = <&pd_top>"? > This is consistent with how clocks refer to their parent clocks. I agree. The only question is weather exynos dts should keep using samsung,power-domain property, or switch to generic 'power-domains' approach. I assume that exynos-pm driver should support both. >>>> Node of a device using power domains must have a samsung,power-domain property >>>> defined with a phandle to respective power domain. >>>> @@ -48,6 +49,7 @@ Example: >>>> mfc_pd: power-domain@10044060 { >>>> compatible = "samsung,exynos4210-pd", "samsung,exynos7-pd-mfc"; >>>> reg = <0x10044060 0x20>; >>>> + parents = <&pd_top>; >>>> #power-domain-cells = <0>; >>>> }; >>> This seems like a good and generic approach to describe that a PM >>> domain could have a parent. I would suggest to rename it, such it >>> reflects its a PM domain binding though. >> I am not sure if this is generic. I guess PD's represented like below >> are more generic. >> PD1 { >> PD2 { >> PD3 { >> }; >> }; >> }; > Such a representation is not always possible. > If you have one power-controller for a hierarchy of PM domains, you can > use it. > If you have multiple power-controllers, the power controller nodes are at the > same level in DT, so you'll have to use "power-domains" properties to link > them together. I agree. I will send updated patch for this purpose for existing exynos4 power domain driver. Best regards
diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt index 00ebda1..0160bdc 100644 --- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt +++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt @@ -24,6 +24,7 @@ Optional Properties: - pclkN, clkN: Pairs of parent of input clock and input clock to the devices in this power domain. Maximum of 4 pairs (N = 0 to 3) are supported currently. +- parents: phandle of parent power domains. Node of a device using power domains must have a samsung,power-domain property defined with a phandle to respective power domain. @@ -48,6 +49,7 @@ Example: mfc_pd: power-domain@10044060 { compatible = "samsung,exynos4210-pd", "samsung,exynos7-pd-mfc"; reg = <0x10044060 0x20>; + parents = <&pd_top>; #power-domain-cells = <0>; }; diff --git a/drivers/soc/samsung/pm_domains.c b/drivers/soc/samsung/pm_domains.c index f4f2a6c..89e2fd5 100644 --- a/drivers/soc/samsung/pm_domains.c +++ b/drivers/soc/samsung/pm_domains.c @@ -25,10 +25,10 @@ #include <linux/soc/samsung/exynos-pmu.h> #define MAX_CLK_PER_DOMAIN 4 +#define MAX_PARENT_POWER_DOMAIN 10 static struct exynos_pmu_pd_ops *pd_ops; - /* * Exynos specific wrapper around the generic power domain */ @@ -169,6 +169,47 @@ no_clk: of_genpd_add_provider_simple(np, &pd->pd); } + /* Assign the child power domains to their parents */ + for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") { + struct device_node *parent_np; + int i; + struct generic_pm_domain *child_domain, *parent_domain; + const char *name; + + if (of_property_read_string_index(np, "compatible", 1, + &name)) { + /* Second entry not found, use the node name*/ + name = np->name; + } + + child_domain = pm_genpd_lookup_name(name); + if (!child_domain) + continue; + /* search parents in device tree */ + for (i = 0; i < MAX_PARENT_POWER_DOMAIN; i++) { + parent_np = of_parse_phandle(np, "parents", i); + if (!parent_np) + break; + + if (of_property_read_string_index(parent_np, + "compatible", 1, &name)) { + /* Second entry not found, use the node name*/ + name = parent_np->name; + } + + parent_domain = pm_genpd_lookup_name(name); + if (!parent_domain) + break; + if (pm_genpd_add_subdomain(parent_domain, child_domain)) + pr_warn("%s failed to add subdomain: %s\n", + parent_domain->name, + child_domain->name); + else + pr_info("%s has as child subdomain: %s.\n", + parent_domain->name, + child_domain->name); + } + } return 0; }
This patch adds supports for parent power domain. This will ensure invoking of parent/child power domain on/off in a correct sequence. In exynos7 SOC's, power domain controllers have parent and child hierarchy. Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> --- .../bindings/arm/exynos/power_domain.txt | 2 + drivers/soc/samsung/pm_domains.c | 43 +++++++++++++++++++- 2 files changed, 44 insertions(+), 1 deletion(-)